Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Netino

Pages: [1] 2 3 ... 17
1
CentOS 7 Problems / Re: Log troubleshooting
« on: January 24, 2020, 04:08:14 AM »
What webserver are you using..?!

There are some possibilities.
Check search.

Found something like that:
http://forum.centos-webpanel.com/centos-webpanel-bugs/default-page-changed-to-index-html-on-all-sites!/

Regards,
Netino

2
CentOS 5 Problems / Re: PROBLEM OF LOAD AVERAGES
« on: January 21, 2020, 02:21:35 AM »
Load averages are highly randomized, and is possible you will don't have two sequential commands, aparted from three or four seconds, run with equal values.
What the size of these differences?

Regards,
Netino

3
Installation / Re: Install in a Centos 7 with previous apps on it
« on: January 13, 2020, 04:19:07 AM »
Hello, I want install Centos 7 64 bits Version, My question is: Can i install with previous apps running on VPS?

I have one helpdesk php made with mysql tables, IONIC Framework running just now,. 

Did you know if is any trouble with install over?

Thank you i like this panel

No, you can't. At least if you don't wanna go crazy solving problems.
You must to install it in a clean server.

Regards,
Netino

4
CentOS 7 Problems / Re: Pure-FTP Failure
« on: January 13, 2020, 04:12:59 AM »
(I know it's a old thread, but is just to document the issue)

The error seems is in this line here:
Code: [Select]
Nov 28 07:55:53 server systemd[1]: Can't open PID file /var/run/pure-ftpd.pid (yet?) after start: Too many levels of symbolic links

It is claiming about "Too many levels of symbolic links" of the PID file.

You tried to run "journalctl -xe" almost 24 minutes after, too late to show logs.

Seems you tried to reinstalled the pure-ftpd server.
Check the permissions of the file '/var/run/pure-ftpd.pid' and the directory.
Removing this file and restarting pure-ftpd server may solve the issue.

If don't, would be good to post here the conf file "/etc/pure-ftpd/pure-ftpd.conf".

Regards,
Netino

5
From Jailkit documentation:
Code: [Select]
Jailkit is a set of utilities to limit user accounts to specific files using chroot() and or specific commands.(...)

So, you did a chroot in your user's shell access..?!
If so, what the surprise..??
Chroot just exist to change the root of directories visible to that user.

But the files still exist there, in the same place, usually. But only visible to the root user.

Regards,
Netino

6
MySQL / Re: Yum Manager and # yum update failing to update Maria SQL
« on: January 06, 2020, 03:03:16 AM »
I'm using OpenVZ7. So, when restart the MariaDB server with above trick, it fails to restart the MariaDB server.

Code: [Select]
# systemctl restart mariadb
Job for mariadb.service failed because the control process exited with error code. See "systemctl status mariadb.service" and "journalctl -xe" for details.

# systemctl -l status mariadb
● mariadb.service - MariaDB 10.2.30 database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/mariadb.service.d
           └─dontprotecthome.conf, limitnofile.conf, migrated-from-my.cnf-settings.conf
   Active: failed (Result: exit-code) since Dom 2020-01-05 19:10:02 -03; 2s ago
     Docs: man:mysqld(8)
           https://mariadb.com/kb/en/library/systemd/
  Process: 3081 ExecStartPre=/bin/sh -c systemctl unset-environment _WSREP_START_POSITION (code=exited, status=201/NICE)

Jan 05 19:10:02 painel.edeaas.com.br systemd[1]: Starting MariaDB 10.2.30 database server...
Jan 05 19:10:02 painel.edeaas.com.br systemd[3081]: Failed at step NICE spawning /bin/sh: Permission denied
Jan 05 19:10:02 painel.edeaas.com.br systemd[1]: mariadb.service: control process exited, code=exited status=201
Jan 05 19:10:02 painel.edeaas.com.br systemd[1]: Failed to start MariaDB 10.2.30 database server.
Jan 05 19:10:02 painel.edeaas.com.br systemd[1]: Unit mariadb.service entered failed state.
Jan 05 19:10:02 painel.edeaas.com.br systemd[1]: mariadb.service failed.

Running "systemctl disable mysql" didn't solved the problem.
When upgraded MariaDB, I see was created a file "/etc/systemd/system/mariadb.service.d/migrated-from-my.cnf-settings.conf":
Code: [Select]
# converted using /usr/bin/mariadb-service-convert
#

[Service]
Nice=-5

For some reason, I cannot do nice/renice of processes priorities in OpenVZ7, although being root user.
I searched google, but could't find anything to solve this problem.
So, commenting the "Nice" parameter, and solved the problem.
Code: [Select]
# converted using /usr/bin/mariadb-service-convert
#

#[Service]
#Nice=-5

# systemctl -l status mariadb
● mariadb.service - MariaDB 10.2.30 database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/mariadb.service.d
           └─migrated-from-my.cnf-settings.conf
   Active: active (running) since Dom 2020-01-05 20:16:38 -03; 2h 51min ago
     Docs: man:mysqld(8)
           https://mariadb.com/kb/en/library/systemd/
  Process: 9559 ExecStartPost=/bin/sh -c systemctl unset-environment _WSREP_START_POSITION (code=exited, status=0/SUCCESS)
  Process: 9441 ExecStartPre=/bin/sh -c [ ! -e /usr/bin/galera_recovery ] && VAR= ||   VAR=`/usr/bin/galera_recovery`; [ $? -eq 0 ]   && systemctl set-environment _WSREP_START_POSITION=$VAR || exit 1 (code=exited, status=0/SUCCESS)
  Process: 9440 ExecStartPre=/bin/sh -c systemctl unset-environment _WSREP_START_POSITION (code=exited, status=0/SUCCESS)
 Main PID: 9527 (mysqld)
   Status: "Taking your SQL requests now..."
   CGroup: /system.slice/mariadb.service
           └─9527 /usr/sbin/mysqld --basedir=/usr

I tried too to add "DefaultLimitNICE:-5:-5" to /etc/systemd/system.conf, but the problem persists.
But strangely, I can use "renice" the running processes by changing the process priority with "htop" tool (need to install it).
Seems a problem with sh/bash.

Regards,
Netino

7
Updates / Re: Update MariaDB >= 10.2
« on: January 06, 2020, 03:02:24 AM »
I'm using OpenVZ7. So, when restart the MariaDB server with above trick, it fails to restart the MariaDB server.

Code: [Select]
# systemctl restart mariadb
Job for mariadb.service failed because the control process exited with error code. See "systemctl status mariadb.service" and "journalctl -xe" for details.

# systemctl -l status mariadb
● mariadb.service - MariaDB 10.2.30 database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/mariadb.service.d
           └─dontprotecthome.conf, limitnofile.conf, migrated-from-my.cnf-settings.conf
   Active: failed (Result: exit-code) since Dom 2020-01-05 19:10:02 -03; 2s ago
     Docs: man:mysqld(8)
           https://mariadb.com/kb/en/library/systemd/
  Process: 3081 ExecStartPre=/bin/sh -c systemctl unset-environment _WSREP_START_POSITION (code=exited, status=201/NICE)

Jan 05 19:10:02 painel.edeaas.com.br systemd[1]: Starting MariaDB 10.2.30 database server...
Jan 05 19:10:02 painel.edeaas.com.br systemd[3081]: Failed at step NICE spawning /bin/sh: Permission denied
Jan 05 19:10:02 painel.edeaas.com.br systemd[1]: mariadb.service: control process exited, code=exited status=201
Jan 05 19:10:02 painel.edeaas.com.br systemd[1]: Failed to start MariaDB 10.2.30 database server.
Jan 05 19:10:02 painel.edeaas.com.br systemd[1]: Unit mariadb.service entered failed state.
Jan 05 19:10:02 painel.edeaas.com.br systemd[1]: mariadb.service failed.

Running "systemctl disable mysql" didn't solved the problem.
When upgraded MariaDB, I see was created a file "/etc/systemd/system/mariadb.service.d/migrated-from-my.cnf-settings.conf":
Code: [Select]
# converted using /usr/bin/mariadb-service-convert
#

[Service]
Nice=-5

For some reason, I cannot do nice/renice of processes priorities in OpenVZ7, although being root user.
I searched google, but could't find anything to solve this problem.
So, commenting the "Nice" parameter, and solved the problem.
Code: [Select]
# converted using /usr/bin/mariadb-service-convert
#

#[Service]
#Nice=-5

# systemctl -l status mariadb
● mariadb.service - MariaDB 10.2.30 database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/mariadb.service.d
           └─migrated-from-my.cnf-settings.conf
   Active: active (running) since Dom 2020-01-05 20:16:38 -03; 2h 51min ago
     Docs: man:mysqld(8)
           https://mariadb.com/kb/en/library/systemd/
  Process: 9559 ExecStartPost=/bin/sh -c systemctl unset-environment _WSREP_START_POSITION (code=exited, status=0/SUCCESS)
  Process: 9441 ExecStartPre=/bin/sh -c [ ! -e /usr/bin/galera_recovery ] && VAR= ||   VAR=`/usr/bin/galera_recovery`; [ $? -eq 0 ]   && systemctl set-environment _WSREP_START_POSITION=$VAR || exit 1 (code=exited, status=0/SUCCESS)
  Process: 9440 ExecStartPre=/bin/sh -c systemctl unset-environment _WSREP_START_POSITION (code=exited, status=0/SUCCESS)
 Main PID: 9527 (mysqld)
   Status: "Taking your SQL requests now..."
   CGroup: /system.slice/mariadb.service
           └─9527 /usr/sbin/mysqld --basedir=/usr

I tried too to add "DefaultLimitNICE:-5:-5" to /etc/systemd/system.conf, but the problem persists.
But strangely, I can use "renice" the running processes by changing the process priority with "htop" tool (need to install it).
Seems a problem with sh/bash.

Regards,
Netino

8
Updates / Re: Update MariaDB >= 10.2
« on: January 04, 2020, 11:11:21 PM »
You can have a problem with systemd daemon, being MySQL service pointed at CWP Dashboard as "No Active".
Checking for "mariadb" service after install, you find nothing.
Seeking for mysql service, you find:
Code: [Select]
# systemctl | grep -i mysql
  mysql.service                                                 loaded active running   LSB: start and stop MariaDB

Checking for the unit existence, you find:
Code: [Select]
# ls -alF /usr/lib/systemd/system/mariadb.service* /usr/share/mysql/systemd/mariadb.service /etc/rc.d/init.d/mysql*
-rwxr-xr-x 1 root root 12192 Dez  4 20:38 /etc/rc.d/init.d/mysql*
lrwxrwxrwx 1 root root    17 Jun 17  2018 /etc/rc.d/init.d/mysqld -> /etc/init.d/mysql*
-rw-r--r-- 1 root root  5157 Dez  4 20:38 /usr/lib/systemd/system/mariadb.service
-rw-r--r-- 1 root root  4513 Out 29  2018 /usr/lib/systemd/system/mariadb.service.rpmsave
-rw-r--r-- 1 root root  5157 Dez  4 20:38 /usr/share/mysql/systemd/mariadb.service

Checking for MySQL with systemctl command:
Code: [Select]
# systemctl status mysql --no-pager
● mysql.service - LSB: start and stop MariaDB
   Loaded: loaded (/etc/rc.d/init.d/mysql; bad; vendor preset: disabled)
   Active: active (running) since Sáb 2020-01-04 03:33:10 -03; 16h ago
     Docs: man:systemd-sysv-generator(8)
   CGroup: /system.slice/mysql.service
           ├─8050 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/painel.edeaas.com.br.pid
           └─8120 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/hostname.err

# systemctl status mysqld --no-pager
● mysqld.service - LSB: start and stop MariaDB
   Loaded: loaded (/etc/rc.d/init.d/mysqld; bad; vendor preset: disabled)
   Active: inactive (dead)
     Docs: man:systemd-sysv-generator(8)

For some strange reason, the manual upgrade MariaDB's installation does't auto enable the unit at systemd.
So, to resolve the CWP Dashboard problem, you simply enable mariadb:
Code: [Select]
# systemctl enable mariadb
Created symlink from /etc/systemd/system/mysql.service to /usr/lib/systemd/system/mariadb.service.
Created symlink from /etc/systemd/system/mysqld.service to /usr/lib/systemd/system/mariadb.service.
Created symlink from /etc/systemd/system/multi-user.target.wants/mariadb.service to /usr/lib/systemd/system/mariadb.service.

Checking for the solution:
Code: [Select]
# systemctl status mysql --no-pager
● mariadb.service - MariaDB 10.2.30 database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/mariadb.service.d
           └─migrated-from-my.cnf-settings.conf
   Active: active (running) (Result: exit-code) since Sáb 2020-01-04 03:33:10 -03; 16h ago
     Docs: man:mysqld(8)
           https://mariadb.com/kb/en/library/systemd/
   CGroup: /system.slice/mysql.service
           ├─8050 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/painel.edeaas.com.br.pid
           └─8120 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/hostname.err

# systemctl status mysqld --no-pager
● mariadb.service - MariaDB 10.2.30 database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/mariadb.service.d
           └─migrated-from-my.cnf-settings.conf
   Active: active (running) (Result: exit-code) since Sáb 2020-01-04 03:33:10 -03; 16h ago
     Docs: man:mysqld(8)
           https://mariadb.com/kb/en/library/systemd/
   CGroup: /system.slice/mysql.service
           ├─8050 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/painel.edeaas.com.br.pid
           └─8120 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/hostname.err

# systemctl status mariadb --no-pager
● mariadb.service - MariaDB 10.2.30 database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/mariadb.service.d
           └─migrated-from-my.cnf-settings.conf
   Active: active (running) (Result: exit-code) since Sáb 2020-01-04 03:33:10 -03; 16h ago
     Docs: man:mysqld(8)
           https://mariadb.com/kb/en/library/systemd/
   CGroup: /system.slice/mysql.service
           ├─8050 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/painel.edeaas.com.br.pid
           └─8120 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/hostname.err


# systemctl status mysql --no-pager
● mariadb.service - MariaDB 10.2.30 database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/mariadb.service.d
           └─migrated-from-my.cnf-settings.conf
   Active: active (running) (Result: exit-code) since Sáb 2020-01-04 03:33:10 -03; 16h ago
     Docs: man:mysqld(8)
           https://mariadb.com/kb/en/library/systemd/
   CGroup: /system.slice/mysql.service
           ├─8050 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/painel.edeaas.com.br.pid
           └─8120 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/hostname.err

Regards,
Netino

9
MySQL / Re: Yum Manager and # yum update failing to update Maria SQL
« on: January 04, 2020, 11:10:15 PM »
You can have a problem with systemd daemon, being MySQL service pointed at CWP Dashboard as "No Active".
Checking for "mariadb" service after install, you find nothing.
Seeking for mysql service, you find:
Code: [Select]
# systemctl | grep -i mysql
  mysql.service                                                 loaded active running   LSB: start and stop MariaDB

Checking for the unit existence, you find:
Code: [Select]
# ls -alF /usr/lib/systemd/system/mariadb.service* /usr/share/mysql/systemd/mariadb.service /etc/rc.d/init.d/mysql*
-rwxr-xr-x 1 root root 12192 Dez  4 20:38 /etc/rc.d/init.d/mysql*
lrwxrwxrwx 1 root root    17 Jun 17  2018 /etc/rc.d/init.d/mysqld -> /etc/init.d/mysql*
-rw-r--r-- 1 root root  5157 Dez  4 20:38 /usr/lib/systemd/system/mariadb.service
-rw-r--r-- 1 root root  4513 Out 29  2018 /usr/lib/systemd/system/mariadb.service.rpmsave
-rw-r--r-- 1 root root  5157 Dez  4 20:38 /usr/share/mysql/systemd/mariadb.service

Checking for MySQL with systemctl command:
Code: [Select]
# systemctl status mysql --no-pager
● mysql.service - LSB: start and stop MariaDB
   Loaded: loaded (/etc/rc.d/init.d/mysql; bad; vendor preset: disabled)
   Active: active (running) since Sáb 2020-01-04 03:33:10 -03; 16h ago
     Docs: man:systemd-sysv-generator(8)
   CGroup: /system.slice/mysql.service
           ├─8050 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/painel.edeaas.com.br.pid
           └─8120 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/hostname.err

# systemctl status mysqld --no-pager
● mysqld.service - LSB: start and stop MariaDB
   Loaded: loaded (/etc/rc.d/init.d/mysqld; bad; vendor preset: disabled)
   Active: inactive (dead)
     Docs: man:systemd-sysv-generator(8)

For some strange reason, the manual upgrade MariaDB's installation does't auto enable the unit at systemd.
So, to resolve the CWP Dashboard problem, you simply enable mariadb:
Code: [Select]
# systemctl enable mariadb
Created symlink from /etc/systemd/system/mysql.service to /usr/lib/systemd/system/mariadb.service.
Created symlink from /etc/systemd/system/mysqld.service to /usr/lib/systemd/system/mariadb.service.
Created symlink from /etc/systemd/system/multi-user.target.wants/mariadb.service to /usr/lib/systemd/system/mariadb.service.

Checking for the solution:
Code: [Select]
# systemctl status mysql --no-pager
● mariadb.service - MariaDB 10.2.30 database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/mariadb.service.d
           └─migrated-from-my.cnf-settings.conf
   Active: active (running) (Result: exit-code) since Sáb 2020-01-04 03:33:10 -03; 16h ago
     Docs: man:mysqld(8)
           https://mariadb.com/kb/en/library/systemd/
   CGroup: /system.slice/mysql.service
           ├─8050 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/painel.edeaas.com.br.pid
           └─8120 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/hostname.err

# systemctl status mysqld --no-pager
● mariadb.service - MariaDB 10.2.30 database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/mariadb.service.d
           └─migrated-from-my.cnf-settings.conf
   Active: active (running) (Result: exit-code) since Sáb 2020-01-04 03:33:10 -03; 16h ago
     Docs: man:mysqld(8)
           https://mariadb.com/kb/en/library/systemd/
   CGroup: /system.slice/mysql.service
           ├─8050 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/painel.edeaas.com.br.pid
           └─8120 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/hostname.err

# systemctl status mariadb --no-pager
● mariadb.service - MariaDB 10.2.30 database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/mariadb.service.d
           └─migrated-from-my.cnf-settings.conf
   Active: active (running) (Result: exit-code) since Sáb 2020-01-04 03:33:10 -03; 16h ago
     Docs: man:mysqld(8)
           https://mariadb.com/kb/en/library/systemd/
   CGroup: /system.slice/mysql.service
           ├─8050 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/painel.edeaas.com.br.pid
           └─8120 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/hostname.err


# systemctl status mysql --no-pager
● mariadb.service - MariaDB 10.2.30 database server
   Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
  Drop-In: /etc/systemd/system/mariadb.service.d
           └─migrated-from-my.cnf-settings.conf
   Active: active (running) (Result: exit-code) since Sáb 2020-01-04 03:33:10 -03; 16h ago
     Docs: man:mysqld(8)
           https://mariadb.com/kb/en/library/systemd/
   CGroup: /system.slice/mysql.service
           ├─8050 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/painel.edeaas.com.br.pid
           └─8120 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/hostname.err

Regards,
Netino

10
MySQL / Re: Yum Manager and # yum update failing to update Maria SQL
« on: January 04, 2020, 11:09:01 PM »
The upgrade is essentially manually installed, and I would not wait to a automated script, for the moment.

11
Apache / Re: Large domlogs files
« on: December 13, 2019, 02:50:03 AM »
Can i delete the log files? cause they take alot of diskspace ?

First, rotate them.
So then, after, delete the rotated file(s).
If you simply delete them, you can cause apache malfuntion.

Or:
Stop apache server, then delete the files, and restart the apache server.

Regards,
Netino

12
Information / Re: Plans to support CentOS 8?
« on: November 16, 2019, 10:10:39 PM »
(...)
I looked into it, and the only solution is to upgrade to a newer Linux kernel above ______ (I forgot the version offhand) but as long as I'm stuck on CentOS 7, my CPU is going to run slow because the system thinks it's overheating. 2200 MHz per core instead of the usual max 3800 MHz per core!

So yes, we need CentOS 8.

It looks like you don't necessarily need a new Centos version, but a new kernel.

Check this:
https://computingforgeeks.com/install-linux-kernel-5-on-centos-7/

It's fairly simple to install.

Regards,
Netino


13
Information / Re: php7-fpm vulnerability CVE-2019-11043
« on: November 16, 2019, 10:04:03 PM »
If you installed it with Softaculous, you must to check the following page, to upgrade your installed software to latest version available:
http://www.softaculous.com/docs/enduser/how-to-upgrade-installations/

Regards,
Netino

14
PHP / Re: ModSecure questions
« on: November 16, 2019, 09:59:09 PM »
This is not a mod_security related question.

Login with ssh as root to your server.
Type the following command to edit the php.ini:
======================================
# nano /opt/alt/php-fpm70/usr/php/php.ini
======================================
(or any other php.ini file you are using)

Find the following two values (with [CTRL]+W):
Code: [Select]
post_max_size = 100M
upload_max_filesize = 100M

Set them to any value you want.
Save and close the file. Where,

Restart Apache server:

$ systemctl restart apache2.service

Now you should able to upload bigger files.

15
E-Mail / Re: mail with php seen as spam
« on: October 16, 2019, 03:30:17 AM »
A simple bet: a relevant line here would be:
Code: [Select]
Received-SPF: neutral (google.com: 82.64.165.128 is neither permitted nor denied by best guess record for domain of progmail@ns1.domain.fr) client-ip=82.64.165.128;

Note, you domain is not set with SPF record, and this could be being classified by google as a low reputation server, hence the spam tag, and spam folder destination.

Regards,
Netino

Pages: [1] 2 3 ... 17