Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
Backup / Can't locate diagnostics.pm in @INC (you may need to install th....
« on: July 08, 2025, 06:20:23 AM »
Hi,
I returned installation of a CWP (with AL 9.6) and have a standard configuration for backup, but today I checked and found the following in the archive message:
etc/cron.daily/csget:
Can't locate diagnostics.pm in @INC (you may need to install the diagnostics module) (@INC contains: /usr/local/lib64/perl5/5.32 /usr/local/share/perl5/5.32 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /etc/cron.daily/csget line 9.
BEGIN failed--compilation aborted at /etc/cron.daily/csget line 9.
How to check and/or fix?
Thank you very much!
BR
Venty
I returned installation of a CWP (with AL 9.6) and have a standard configuration for backup, but today I checked and found the following in the archive message:
etc/cron.daily/csget:
Can't locate diagnostics.pm in @INC (you may need to install the diagnostics module) (@INC contains: /usr/local/lib64/perl5/5.32 /usr/local/share/perl5/5.32 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /etc/cron.daily/csget line 9.
BEGIN failed--compilation aborted at /etc/cron.daily/csget line 9.
How to check and/or fix?
Thank you very much!
BR
Venty
2
Installation / I don't receive a single message from root..??
« on: June 23, 2025, 06:09:43 PM »
Hi,
in the settings I have "root forwarder file detected, all root emails are forwarded to: test@mydomain.com", but I don't receive a single message from root..??
Distro Name: AlmaLinux release 9.6 (Sage Margay). PHP version 7.4.33
BR
Venty
in the settings I have "root forwarder file detected, all root emails are forwarded to: test@mydomain.com", but I don't receive a single message from root..??
Distro Name: AlmaLinux release 9.6 (Sage Margay). PHP version 7.4.33
BR
Venty
3
DKIM / Problem with DKIM..
« on: June 23, 2025, 10:45:06 AM »
Hi,
had to reinstall the server and through the user account I added three new domains, I set up the DKIM records, but please look at what is visible in DKIM & SPF Manager...(with the previous installation everything was OK):
https://prnt.sc/7r0uwwyiMOQh
... and this is not a permanent situation, sometimes it shows a green check mark on one domain, sometimes on another...
I also tested the DKIM records are not active...
Before I started, I executed:
https://starburst.help/control-web-panel-cwp/control-web-panel-cwp-admin-tutorials/dkim-not-working-on-almalinux-9-with-cwp/
Distro Name: AlmaLinux release 9.6 (Sage Margay). PHP version 7.4.33
What should I do..?
Thanks in advance!
BR
Venty
had to reinstall the server and through the user account I added three new domains, I set up the DKIM records, but please look at what is visible in DKIM & SPF Manager...(with the previous installation everything was OK):
https://prnt.sc/7r0uwwyiMOQh
... and this is not a permanent situation, sometimes it shows a green check mark on one domain, sometimes on another...
I also tested the DKIM records are not active...
Before I started, I executed:
https://starburst.help/control-web-panel-cwp/control-web-panel-cwp-admin-tutorials/dkim-not-working-on-almalinux-9-with-cwp/
Distro Name: AlmaLinux release 9.6 (Sage Margay). PHP version 7.4.33
What should I do..?
Thanks in advance!
BR
Venty
4
Mod_Security / Status engine is currently disabled, enable it by set SecStatusEngine to On..
« on: June 23, 2025, 09:43:47 AM »
Hi,
sled installation of mod security and updating to 2.9.8, everything is OK, I have the entry "ModSecurity for Apache/2.9.8 (http://www.modsecurity.org/) configured.", but I also have the entry "ModSecurity: Status engine is currently disabled, enable it by set SecStatusEngine to On."....
What should I do..?
Thanks in advance!
BR
Venty
sled installation of mod security and updating to 2.9.8, everything is OK, I have the entry "ModSecurity for Apache/2.9.8 (http://www.modsecurity.org/) configured.", but I also have the entry "ModSecurity: Status engine is currently disabled, enable it by set SecStatusEngine to On."....
What should I do..?
Thanks in advance!
BR
Venty
5
Mod_Security / OWASP CRS v4.15.0 Just Release
« on: June 16, 2025, 06:17:43 PM »
Hi,
The OWASP CRS ruleset 4.15.0 was just released .... how to install them???
Thanks in advance!
BR
Venty
The OWASP CRS ruleset 4.15.0 was just released .... how to install them???
Thanks in advance!
BR
Venty
6
MySQL / upgraded MariaDB, and to 10.11and does not recognize the database....
« on: June 02, 2025, 06:18:25 PM »
Hi,
I used the instructions here:
https://kb.starburstservices.com/control-web-panel-cwp/control-web-panel-cwp-admin-tutorials/upgrade-mariadb-10-x-to-10-11-with-cwp-on-almalinux-9/
and upgraded MariaDB to 10.11....
Today, I had to create a new database with a user through the user panel. Everything went normally, but when I tried to use the database during WordPress installation, I encountered an error stating that it could not access the database.
I tested it several times, but it didn't work.. Then again, through the user panel, I "changed" the password of the database user (I copied and pasted the same one that I had set when creating the database), and everything worked - the WordPress installation accessed the database???
I haven't made any changes to the server, except that on 25.05 MariaDB was updated to 10.11.13 and I changed the root password.
When checking the status of the MySQL Database Server, I found the following entries:
Jun 02 20:59:19 hosting.mydomain.com mariadbd[1123]: 2025-06-02 20:59:19 682 [Warning] Aborted connection 682 to db: 'postfix' user: 'postfix' host: 'localhost' (Got an error reading communication packets)
Jun 02 21:03:04 hosting.mydomain.com mariadbd[1123]: 2025-06-02 21:03:04 1234 [Warning] Aborted connection 1234 to db: 'postfix' user: 'postfix' host: 'localhost' (Got an error reading communication packets)
Jun 02 21:04:08 hosting.mydomain.com mariadbd[1123]: 2025-06-02 21:04:08 1693 [Warning] Access denied for user 'hosmyd_k92test'@'localhost' (using password: YES)
Please help, what should I do?
BR
Venty
I used the instructions here:
https://kb.starburstservices.com/control-web-panel-cwp/control-web-panel-cwp-admin-tutorials/upgrade-mariadb-10-x-to-10-11-with-cwp-on-almalinux-9/
and upgraded MariaDB to 10.11....
Today, I had to create a new database with a user through the user panel. Everything went normally, but when I tried to use the database during WordPress installation, I encountered an error stating that it could not access the database.
I tested it several times, but it didn't work.. Then again, through the user panel, I "changed" the password of the database user (I copied and pasted the same one that I had set when creating the database), and everything worked - the WordPress installation accessed the database???
I haven't made any changes to the server, except that on 25.05 MariaDB was updated to 10.11.13 and I changed the root password.
When checking the status of the MySQL Database Server, I found the following entries:
Jun 02 20:59:19 hosting.mydomain.com mariadbd[1123]: 2025-06-02 20:59:19 682 [Warning] Aborted connection 682 to db: 'postfix' user: 'postfix' host: 'localhost' (Got an error reading communication packets)
Jun 02 21:03:04 hosting.mydomain.com mariadbd[1123]: 2025-06-02 21:03:04 1234 [Warning] Aborted connection 1234 to db: 'postfix' user: 'postfix' host: 'localhost' (Got an error reading communication packets)
Jun 02 21:04:08 hosting.mydomain.com mariadbd[1123]: 2025-06-02 21:04:08 1693 [Warning] Access denied for user 'hosmyd_k92test'@'localhost' (using password: YES)
Please help, what should I do?
BR
Venty
7
E-Mail / WordPress nail
« on: April 12, 2025, 02:35:32 PM »
Hi,
since few days i stopped receiving messages from wordpress about new site...
BR
Ventyp
since few days i stopped receiving messages from wordpress about new site...
BR
Ventyp
8
Problems on other RedHat linux servers / error_log: binary file matches
« on: March 25, 2025, 04:41:18 PM »
Hi,
I am using AL 9..., I get the following error message:
grep: /usr/local/cwpsrv/logs/error_log: binary file matches
What should I do?
Thanks in advance!
BR
Venty
I am using AL 9..., I get the following error message:
grep: /usr/local/cwpsrv/logs/error_log: binary file matches
What should I do?
Thanks in advance!
BR
Venty
9
Problems on other RedHat linux servers / no Varnish...
« on: March 14, 2025, 12:41:04 PM »
Hi,
I am using Alma Linux 9.
After a fresh install of CWP, PHP7.4 and FPM or PHP8.1 and FPM
I got to the SelectWebServer option under the WebServer Settings menu and select Nginx & Varnish & Apache, but I found no Varnish...
What should I do?
BR
Venty
I am using Alma Linux 9.
After a fresh install of CWP, PHP7.4 and FPM or PHP8.1 and FPM
I got to the SelectWebServer option under the WebServer Settings menu and select Nginx & Varnish & Apache, but I found no Varnish...
What should I do?
BR
Venty
10
Installation / what's wrong with MongoDB
« on: March 09, 2025, 02:52:49 PM »
Hi,
I use Control Web Panel (CWP) on AlmaLinux 9...
Now we will login to the server and I run: php -v
And receive: https://prnt.sc/x0-Xx_GtLLfq
Can anyone tell me what's wrong with MongoDB and what I can do to avoid these errors...
BR
Venty
I use Control Web Panel (CWP) on AlmaLinux 9...
Now we will login to the server and I run: php -v
And receive: https://prnt.sc/x0-Xx_GtLLfq
Can anyone tell me what's wrong with MongoDB and what I can do to avoid these errors...
BR
Venty
11
Installation / Failed to restart cbpolicyd.service: Unit cbpolicyd.service not found.
« on: March 03, 2025, 07:09:16 AM »
Hi,
I built a mail server in the CWP, then restarted all mail servers....
https://prnt.sc/oSaQTIuflGO9
https://prnt.sc/oSaQTIuflGO9
I got the following error: Failed to restart cbpolicyd.service: Unit cbpolicyd.service not found.
https://prnt.sc/dveo9EHxBIau
Pls, help....
BR
Venty
I built a mail server in the CWP, then restarted all mail servers....
https://prnt.sc/oSaQTIuflGO9
https://prnt.sc/oSaQTIuflGO9
I got the following error: Failed to restart cbpolicyd.service: Unit cbpolicyd.service not found.
https://prnt.sc/dveo9EHxBIau
Pls, help....
BR
Venty
12
Installation / Hidden processes...
« on: March 03, 2025, 04:30:09 AM »
Hi,
CWP on AlmaLinux 8/9
Please look at the pictures:
https://prnt.sc/UIdzbfGYEHZg
https://prnt.sc/xxeOnFoYtp42
I choose, but the status is always the same, please help?
BR
Venty
CWP on AlmaLinux 8/9
Please look at the pictures:
https://prnt.sc/UIdzbfGYEHZg
https://prnt.sc/xxeOnFoYtp42
I choose, but the status is always the same, please help?
BR
Venty
13
Information / Content management systems....
« on: February 25, 2025, 08:03:34 PM »
Hi,
CWP and Content management systems - WordPress, Joomla, etc... features, security...>
Thanks in advance!
BR
Venty
CWP and Content management systems - WordPress, Joomla, etc... features, security...>
Thanks in advance!
BR
Venty
14
Installation / the snapshot or to do a new installation?
« on: February 16, 2025, 04:57:13 PM »
Hi,
please give your opinion - a snapshot of the current state of the server was taken and then a number of applications and settings were tested -- what is the best thing to do next - to revert to the state at the time of the snapshot or to do a new installation?
Which is better?
BR
Venty
please give your opinion - a snapshot of the current state of the server was taken and then a number of applications and settings were tested -- what is the best thing to do next - to revert to the state at the time of the snapshot or to do a new installation?
Which is better?
BR
Venty
15
SSL / Does the SSL certificate depend on the selected server
« on: February 10, 2025, 09:31:41 AM »
Hi,
Does the SSL certificate (AutoSSL (Let's Encrypt)) depend on the selected server types in the CWP panel??? Does it matter when and where we install the SSL and what server/s we have chosen:
https://prnt.sc/sCaYiLZJG-wv
i.e. if we installed it in 1, will it work in 2 as well (or vice versa)?
BR
Venty
Does the SSL certificate (AutoSSL (Let's Encrypt)) depend on the selected server types in the CWP panel??? Does it matter when and where we install the SSL and what server/s we have chosen:
https://prnt.sc/sCaYiLZJG-wv
i.e. if we installed it in 1, will it work in 2 as well (or vice versa)?
BR
Venty
