Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
E-Mail / autocreate plugin is deprecated, use mailbox { auto } setting instead
« on: February 15, 2021, 03:34:43 AM »
Hi,
Testing a few email accounts in Roundcube
I can send out emails but can't receive any, testing with gmail account.
Looked at /var/log/dovecot.log
Feb 15 04:07:36 imap(me@domain.it): Warning: autocreate plugin is deprecated, use mailbox { auto } setting instead
/var/log/maillog
Feb 15 04:28:59 svr1 postfix/smtpd[18842]: warning: unknown[ip]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
Feb 15 04:29:00 svr1 postfix/smtpd[19641]: warning: unknown[87.246.7.000]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
Feb 15 04:29:00 svr1 postfix/smtpd[18315]: warning: unknown[ip]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
Feb 15 04:29:00 svr1 postfix/smtpd[18315]: disconnect from unknown[ip] ehlo=1 auth=0/1 rset=1 quit=1 commands=3/4
Feb 15 04:29:00 svr1 postfix/smtpd[18809]: connect from unknown[ip]
Feb 15 04:29:00 svr1 postfix/smtpd[18842]: disconnect from unknown[ip] ehlo=1 auth=0/1 rset=1 quit=1 commands=3/4
Feb 15 04:29:00 svr1 postfix/smtpd[19641]: disconnect from unknown[87.246.7.000] ehlo=1 auth=0/1 rset=1 quit=1 commands=3/4
Feb 15 04:29:03 svr1 postfix/smtpd[15533]: warning: hostname net6-ip000.linkbg.com does not resolve to address 87.246.7.000: Name or service not known
Feb 15 04:29:03 svr1 postfix/smtpd[15533]: connect from unknown[87.246.7.000]
Feb 15 04:29:03 svr1 postfix/smtpd[19486]: connect from unknown[ip]
Feb 15 04:29:04 svr1 postfix/smtpd[18315]: connect from unknown[ip]
Feb 15 04:29:05 svr1 postfix/smtpd[18842]: connect from unknown[ip]
Any advice appreciated
Testing a few email accounts in Roundcube
I can send out emails but can't receive any, testing with gmail account.
Looked at /var/log/dovecot.log
Feb 15 04:07:36 imap(me@domain.it): Warning: autocreate plugin is deprecated, use mailbox { auto } setting instead
/var/log/maillog
Feb 15 04:28:59 svr1 postfix/smtpd[18842]: warning: unknown[ip]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
Feb 15 04:29:00 svr1 postfix/smtpd[19641]: warning: unknown[87.246.7.000]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
Feb 15 04:29:00 svr1 postfix/smtpd[18315]: warning: unknown[ip]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
Feb 15 04:29:00 svr1 postfix/smtpd[18315]: disconnect from unknown[ip] ehlo=1 auth=0/1 rset=1 quit=1 commands=3/4
Feb 15 04:29:00 svr1 postfix/smtpd[18809]: connect from unknown[ip]
Feb 15 04:29:00 svr1 postfix/smtpd[18842]: disconnect from unknown[ip] ehlo=1 auth=0/1 rset=1 quit=1 commands=3/4
Feb 15 04:29:00 svr1 postfix/smtpd[19641]: disconnect from unknown[87.246.7.000] ehlo=1 auth=0/1 rset=1 quit=1 commands=3/4
Feb 15 04:29:03 svr1 postfix/smtpd[15533]: warning: hostname net6-ip000.linkbg.com does not resolve to address 87.246.7.000: Name or service not known
Feb 15 04:29:03 svr1 postfix/smtpd[15533]: connect from unknown[87.246.7.000]
Feb 15 04:29:03 svr1 postfix/smtpd[19486]: connect from unknown[ip]
Feb 15 04:29:04 svr1 postfix/smtpd[18315]: connect from unknown[ip]
Feb 15 04:29:05 svr1 postfix/smtpd[18842]: connect from unknown[ip]
Any advice appreciated
2
CentOS 7 Problems / Site down, can't start Nginx Reverse Proxy, FTP Server & Varnish Cache Server
« on: January 09, 2020, 01:37:55 AM »
Hi,
Distro Name: CentOS Linux release 7.7.1908 (Core)
Kernel Version: 2.6.32-042stab127.2
I'm having issues accessing my site,
I logged into CWP and see Nginx Reverse Proxy, FTP Server & Varnish Cache Server are down.
Just noticed some of the mail services failed to start too after server reboot.
Dovecot IMAP/POP3 Server
ClamAV
AMaViS (A Mail Virus Scanner)
SpamAssassin
Not sure how to fix all issues.
Here's some status info for Nginx Reverse Proxy..
● nginx.service - nginx - high performance web server
Loaded: loaded (/usr/lib/systemd/system/nginx.service; enabled; vendor preset: disabled)
Active: failed (Result: timeout) since Thu 2020-01-09 01:21:38 UTC; 2min 56s ago
Docs: http://nginx.org/en/docs/
Process: 28857 ExecStart=/usr/sbin/nginx -c /etc/nginx/nginx.conf (code=exited, status=0/SUCCESS)
Jan 09 01:20:08 clients systemd[1]: Starting nginx - high performance web server...
Jan 09 01:20:08 clients systemd[1]: Can't open PID file /var/run/nginx.pid (yet?) after start: Too many levels of symbolic links
Jan 09 01:21:38 clients systemd[1]: nginx.service start operation timed out. Terminating.
Jan 09 01:21:38 clients systemd[1]: Failed to start nginx - high performance web server.
Jan 09 01:21:38 clients systemd[1]: Unit nginx.service entered failed state.
Jan 09 01:21:38 clients systemd[1]: nginx.service failed.
-- Unit session-7789535.scope has finished starting up.
--
-- The start-up result is done.
Jan 09 01:00:01 clients CROND[25275]: (root) CMD (/usr/local/bin/php -q /home/dsm1/public_html/index.php cron > /dev/null 2>&1)
Jan 09 01:00:32 clients systemd[1]: nginx.service start operation timed out. Terminating.
Jan 09 01:00:32 clients systemd[1]: Failed to start nginx - high performance web server.
-- Subject: Unit nginx.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit nginx.service has failed.
--
-- The result is failed.
Jan 09 01:00:32 clients systemd[1]: Unit nginx.service entered failed state.
Jan 09 01:00:32 clients systemd[1]: nginx.service failed.
Jan 09 01:05:01 clients systemd[1]: Started Session 7789811 of user root.
-- Subject: Unit session-7789811.scope has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit session-7789811.scope has finished starting up.
I posted this the other night, I was attempting to update the kernel, don't think it worked.
http://forum.centos-webpanel.com/index.php?topic=8068.msg27597#msg27597
Distro Name: CentOS Linux release 7.7.1908 (Core)
Kernel Version: 2.6.32-042stab127.2
I'm having issues accessing my site,
I logged into CWP and see Nginx Reverse Proxy, FTP Server & Varnish Cache Server are down.
Just noticed some of the mail services failed to start too after server reboot.
Dovecot IMAP/POP3 Server
ClamAV
AMaViS (A Mail Virus Scanner)
SpamAssassin
Not sure how to fix all issues.
Here's some status info for Nginx Reverse Proxy..
● nginx.service - nginx - high performance web server
Loaded: loaded (/usr/lib/systemd/system/nginx.service; enabled; vendor preset: disabled)
Active: failed (Result: timeout) since Thu 2020-01-09 01:21:38 UTC; 2min 56s ago
Docs: http://nginx.org/en/docs/
Process: 28857 ExecStart=/usr/sbin/nginx -c /etc/nginx/nginx.conf (code=exited, status=0/SUCCESS)
Jan 09 01:20:08 clients systemd[1]: Starting nginx - high performance web server...
Jan 09 01:20:08 clients systemd[1]: Can't open PID file /var/run/nginx.pid (yet?) after start: Too many levels of symbolic links
Jan 09 01:21:38 clients systemd[1]: nginx.service start operation timed out. Terminating.
Jan 09 01:21:38 clients systemd[1]: Failed to start nginx - high performance web server.
Jan 09 01:21:38 clients systemd[1]: Unit nginx.service entered failed state.
Jan 09 01:21:38 clients systemd[1]: nginx.service failed.
-- Unit session-7789535.scope has finished starting up.
--
-- The start-up result is done.
Jan 09 01:00:01 clients CROND[25275]: (root) CMD (/usr/local/bin/php -q /home/dsm1/public_html/index.php cron > /dev/null 2>&1)
Jan 09 01:00:32 clients systemd[1]: nginx.service start operation timed out. Terminating.
Jan 09 01:00:32 clients systemd[1]: Failed to start nginx - high performance web server.
-- Subject: Unit nginx.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit nginx.service has failed.
--
-- The result is failed.
Jan 09 01:00:32 clients systemd[1]: Unit nginx.service entered failed state.
Jan 09 01:00:32 clients systemd[1]: nginx.service failed.
Jan 09 01:05:01 clients systemd[1]: Started Session 7789811 of user root.
-- Subject: Unit session-7789811.scope has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit session-7789811.scope has finished starting up.
I posted this the other night, I was attempting to update the kernel, don't think it worked.
http://forum.centos-webpanel.com/index.php?topic=8068.msg27597#msg27597
3
CentOS 7 Problems / FTP Server, Varnish Cache Server & Nginx Reverse Proxy won't start..
« on: January 04, 2020, 05:52:39 AM »
Hi,
I noticed these three were down and tried to restart them with no luck.
FTP Server, Varnish Cache Server & Nginx Reverse Proxy.
I Googled "Can't open PID file /var/run/pure-ftpd.pid (yet?) after start: Too many levels of symbolic links"
And found this post: https://forum.centos-webpanel.com/centos-7-problems/i-can't-start-ftp-server/
Following the above tutorial and trying to update the kernel but got stuck at nano /etc/default/grub
Error opening terminal: Unknown
And cat /etc/default/grub
There's no grub file at /etc/default/
Any help appreciated
I ran these commands:
rpm --import http://www.elrepo.org/RPM-GPG-KEY-elrepo.org
rpm -Uvh https://www.elrepo.org/elrepo-release-7.0-4.el7.elrepo.noarch.rpm
yum --enablerepo=elrepo-kernel install kernel-ml -y
nano /etc/default/grub
I noticed these three were down and tried to restart them with no luck.
FTP Server, Varnish Cache Server & Nginx Reverse Proxy.
I Googled "Can't open PID file /var/run/pure-ftpd.pid (yet?) after start: Too many levels of symbolic links"
And found this post: https://forum.centos-webpanel.com/centos-7-problems/i-can't-start-ftp-server/
Following the above tutorial and trying to update the kernel but got stuck at nano /etc/default/grub
Error opening terminal: Unknown
And cat /etc/default/grub
There's no grub file at /etc/default/
Any help appreciated
I ran these commands:
rpm --import http://www.elrepo.org/RPM-GPG-KEY-elrepo.org
rpm -Uvh https://www.elrepo.org/elrepo-release-7.0-4.el7.elrepo.noarch.rpm
yum --enablerepo=elrepo-kernel install kernel-ml -y
nano /etc/default/grub
4
SSL / Can I have a folder use http even though the domain uses https?
« on: January 16, 2019, 02:21:41 AM »
Hi,
I have a domain secured with https, so any http requests are forced to https.
But I have a directory on that domain that's used from something else that won't accept https requests.
I guess what I'm wondering is can I have that directory use http instead of https?
Someone said I can do it with .htacces but not sure how.
How do I achieve this?
Thanks
I have a domain secured with https, so any http requests are forced to https.
But I have a directory on that domain that's used from something else that won't accept https requests.
I guess what I'm wondering is can I have that directory use http instead of https?
Someone said I can do it with .htacces but not sure how.
How do I achieve this?
Thanks
5
Installation / Need to update Python should I update it or install twice?
« on: December 05, 2018, 03:27:37 AM »
Hi,
I have an app to test that requires Python 3.6 but the installed versionn is 2.7.5
How can I update it or should I install the new version of Python beside version 2.7.5?
Thanks in advance.
I have an app to test that requires Python 3.6 but the installed versionn is 2.7.5
How can I update it or should I install the new version of Python beside version 2.7.5?
Thanks in advance.
6
FTP / FTP Manager v2 no access to public_html /home/user/public_html/./
« on: November 20, 2018, 05:20:57 AM »
Hi,
When I create an FTP account with FTP Manager v2
I can log in but I only see .bash_profilt, .bashrc, .bash_logout,
I can't see the public_html directory or any other.
In the FTP Manager the path says /home/user/public_html/./
https://snag.gy/YkoSIu.jpg
How can I solve this?
Thanks
When I create an FTP account with FTP Manager v2
I can log in but I only see .bash_profilt, .bashrc, .bash_logout,
I can't see the public_html directory or any other.
In the FTP Manager the path says /home/user/public_html/./
https://snag.gy/YkoSIu.jpg
How can I solve this?
Thanks
7
SSL / AutoSSL keeps expiring then won't install new cert
« on: October 23, 2018, 04:38:32 AM »
Can anyone explain how to get autossl to install.
I went to ssl certificates and see the autosll cert has expired again,
So I deleted the cert then clicked AutoSSL FREE and tried to create a new cert.
I've no clue why I have to keep renewing this cert, can I set it to auto renew?
How do I fix this issue, can't instal la new cert.
Error...!
DNS of your domain doesn't point to this server or you have htaccess restrictions
I have a .htaccess in the public_html
########################################################
# package: minPHP
# filename: .htaccess
########################################################
# Do not allow direct access to templates
# or an unauthorized backdoor from CE
<Files ~ "blesta2ce.php|\.(pdt)$">
order deny,allow
deny from all
</Files>
# Protect against Clickjacking
#Header append X-Frame-Options "SAMEORIGIN"
RewriteEngine on
# Force HTTPS
#RewriteCond %{HTTPS} !=on
#RewriteRule ^ https://%{HTTP_HOST}%{REQUEST_URI} [R=307,NE,L]
RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME} !-f
RewriteRule ^(.*)$ index.php
RewriteCond %{REQUEST_URI} ^(.*)/install.php$
RewriteRule install.php %1/install/ [R=301,L]
I went to ssl certificates and see the autosll cert has expired again,
So I deleted the cert then clicked AutoSSL FREE and tried to create a new cert.
I've no clue why I have to keep renewing this cert, can I set it to auto renew?
How do I fix this issue, can't instal la new cert.
Error...!
DNS of your domain doesn't point to this server or you have htaccess restrictions
I have a .htaccess in the public_html
########################################################
# package: minPHP
# filename: .htaccess
########################################################
# Do not allow direct access to templates
# or an unauthorized backdoor from CE
<Files ~ "blesta2ce.php|\.(pdt)$">
order deny,allow
deny from all
</Files>
# Protect against Clickjacking
#Header append X-Frame-Options "SAMEORIGIN"
RewriteEngine on
# Force HTTPS
#RewriteCond %{HTTPS} !=on
#RewriteRule ^ https://%{HTTP_HOST}%{REQUEST_URI} [R=307,NE,L]
RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME} !-f
RewriteRule ^(.*)$ index.php
RewriteCond %{REQUEST_URI} ^(.*)/install.php$
RewriteRule install.php %1/install/ [R=301,L]
8
SSL / AutoSSL has expired on domain, can't renew it..
« on: July 02, 2018, 12:17:48 PM »
Hello,
I have an AutoSSL cert on a subdomain that has expired,
I clicked the Renew Now button under SSL Configurations,
The green popup indicated it was successful, but it hasn't renewed the cert.
I am trying to get this cert to auto update when it expires.
Also tried reload and restarting web server.
I ran the commands posted in this thread but not sure if they did anything:
http://forum.centos-webpanel.com/ssl/autorenew-ssl-is-enabled-yet-my-certificates-will-expired-after-6-days/msg12229/#msg12229
Any help appreciated.
I have an AutoSSL cert on a subdomain that has expired,
I clicked the Renew Now button under SSL Configurations,
The green popup indicated it was successful, but it hasn't renewed the cert.
I am trying to get this cert to auto update when it expires.
Also tried reload and restarting web server.
I ran the commands posted in this thread but not sure if they did anything:
http://forum.centos-webpanel.com/ssl/autorenew-ssl-is-enabled-yet-my-certificates-will-expired-after-6-days/msg12229/#msg12229
Any help appreciated.
9
CentOS-WebPanel GUI / ERR_CONNECTION_REFUSED This site can’t be reached
« on: March 16, 2018, 03:01:24 AM »
I just did a fresh install on Centos 7 and I'm locked out of CWP again, the subdomain / website works.
The only thing I did on the VPS was enable firewalld and changed the default login port.
I created one user account and used subdomain.mysite.com for the domain.
I also ticked anable autossl.
Think the last thing I did was enable firewall in CWP.
When I'm in terminal I'm greeted by CWP so i guess it's running,
Restarted apache and rebooted server, no joy.
This site can’t be reached
652.942.256.122 refused to connect.
Try:
Checking the connection
Checking the proxy and the firewall
ERR_CONNECTION_REFUSED
The only thing I did on the VPS was enable firewalld and changed the default login port.
I created one user account and used subdomain.mysite.com for the domain.
I also ticked anable autossl.
Think the last thing I did was enable firewall in CWP.
When I'm in terminal I'm greeted by CWP so i guess it's running,
Restarted apache and rebooted server, no joy.
This site can’t be reached
652.942.256.122 refused to connect.
Try:
Checking the connection
Checking the proxy and the firewall
ERR_CONNECTION_REFUSED
10
Information / Will CWP work with a subdomain?
« on: March 14, 2018, 05:22:38 PM »
Hi,
Can I use a subdomain that was set up on another linux server in whm/cpanel?
Example clients.domain.com
This subdomain is pointed to my VPS.
The VPS Hostname is set to clients.domain.com
The VPS has one IP.
CWP installs fine but when I start playing with the settings,
I keep getting errors with the Hostname
Can anyone take a look at my setup in teamviewer or something?
I don't mind paying for support if I can get this setup correctly.
I created a user and added the subdomain as a domain, then enabled autossl and got locked out somehow.
So I completely rebuilt Centos 7 and enabled firewalld and changed the root login port.
I'm installing CWP again, but i need someone to have a look at my configuration.
Can I use a subdomain that was set up on another linux server in whm/cpanel?
Example clients.domain.com
This subdomain is pointed to my VPS.
The VPS Hostname is set to clients.domain.com
The VPS has one IP.
CWP installs fine but when I start playing with the settings,
I keep getting errors with the Hostname
Can anyone take a look at my setup in teamviewer or something?
I don't mind paying for support if I can get this setup correctly.
I created a user and added the subdomain as a domain, then enabled autossl and got locked out somehow.
So I completely rebuilt Centos 7 and enabled firewalld and changed the root login port.
I'm installing CWP again, but i need someone to have a look at my configuration.
11
Installation / Domain points to /usr/local/apache/htdocs instead of home/user/public_html
« on: March 13, 2018, 06:34:49 PM »
I think I messed up, I'm about to delete this thing for the last time, I set user permissions then lost access to the public_html
My site loads the default page from /usr/local/apache/htdocs instead of the index.html in home/user/public_html
Eve if I delete that index file in home/user/public_html it will show Index of /webftp_simple/
I added an index.html to my home/user/public_html directory which was working fine, but not now, I'm stressed big time.
My site loads the default page from /usr/local/apache/htdocs instead of the index.html in home/user/public_html
Eve if I delete that index file in home/user/public_html it will show Index of /webftp_simple/
I added an index.html to my home/user/public_html directory which was working fine, but not now, I'm stressed big time.
12
CentOS-WebPanel GUI / Enabled LetsEncrypt and get ERR_CONNECTION_REFUSED
« on: March 13, 2018, 08:01:26 AM »
Hi,
Linux VPS, Centos 7, CWP 7, PHP 7.1.15
When i installed CWP 7 I logged in as root and set up free autossl on my domain which worked fine.
Every URL redirects to https, including the CWP 7 admin panel, that was showing as insecure in the address bar.
So then I was trying to get CWP 7 to redirect to https and somehow lost access to the admin panel.
I noticed that letsencrypt wasn't installed in the CWP panel, so I clicked install.
When I go to https://mysite.com:2031 I get a blank page with this message: ERR_CONNECTION_REFUSED
I can't access any website content either.
I can't access the CWP 7 admin panel at: https://mysite.com:2031
I tried turning off IPtables but no joy,
I don't know if the firewalld has anything to do with this but I get some errors:
[root@me ~]# systemctl status firewalld
* firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2018-03-13 06:30:24 UTC; 54s ago
Docs: man:firewalld(1)
Main PID: 4862 (firewalld)
CGroup: /system.slice/firewalld.service
`-4862 /usr/bin/python -Es /usr/sbin/firewalld --nofork --nopid
Mar 13 06:30:25 clients firewalld[4862]: WARNING: ipset not usable, disabling ipset usage in firewall.
Mar 13 06:30:26 clients firewalld[4862]: WARNING: ICMP type 'beyond-scope' is not supported by the kernel for ipv6.
Mar 13 06:30:26 clients firewalld[4862]: WARNING: beyond-scope: INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
Mar 13 06:30:26 clients firewalld[4862]: WARNING: ICMP type 'failed-policy' is not supported by the kernel for ipv6.
Mar 13 06:30:26 clients firewalld[4862]: WARNING: failed-policy: INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
Mar 13 06:30:26 clients firewalld[4862]: WARNING: ICMP type 'reject-route' is not supported by the kernel for ipv6.
Mar 13 06:30:26 clients firewalld[4862]: WARNING: reject-route: INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
Mar 13 06:30:26 clients firewalld[4862]: ERROR: Failed to read file "/proc/sys/net/netfilter/nf_conntrack_helper": [Errno 2] No such file or directory: '/p...ck_helper'
Mar 13 06:30:26 clients firewalld[4862]: WARNING: Failed to get and parse nf_conntrack_helper setting
Mar 13 06:30:26 clients firewalld[4862]: WARNING: ebtables not usable, disabling ethernet bridge firewall.
Just tried this:
[root@me ~]# systemctl status cwpsrv.service
* cwpsrv.service - CentOS Web Panel service (daemon)
Loaded: loaded (/usr/lib/systemd/system/cwpsrv.service; enabled; vendor preset: disabled)
Active: activating (auto-restart) (Result: exit-code) since Tue 2018-03-13 07:55:06 UTC; 4s ago
Process: 1922 ExecStartPre=/usr/local/cwpsrv/bin/cwpsrv -t (code=exited, status=1/FAILURE)
Mar 13 07:55:06 clients systemd[1]: Failed to start CentOS Web Panel servic...).
Mar 13 07:55:06 clients systemd[1]: Unit cwpsrv.service entered failed state.
Mar 13 07:55:06 clients systemd[1]: cwpsrv.service failed.
Hint: Some lines were ellipsized, use -l to show in full.
I don't know what to do and I'm in the middle of a project.
Any help appreciated
Linux VPS, Centos 7, CWP 7, PHP 7.1.15
When i installed CWP 7 I logged in as root and set up free autossl on my domain which worked fine.
Every URL redirects to https, including the CWP 7 admin panel, that was showing as insecure in the address bar.
So then I was trying to get CWP 7 to redirect to https and somehow lost access to the admin panel.
I noticed that letsencrypt wasn't installed in the CWP panel, so I clicked install.
When I go to https://mysite.com:2031 I get a blank page with this message: ERR_CONNECTION_REFUSED
I can't access any website content either.
I can't access the CWP 7 admin panel at: https://mysite.com:2031
I tried turning off IPtables but no joy,
I don't know if the firewalld has anything to do with this but I get some errors:
[root@me ~]# systemctl status firewalld
* firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; vendor preset: enabled)
Active: active (running) since Tue 2018-03-13 06:30:24 UTC; 54s ago
Docs: man:firewalld(1)
Main PID: 4862 (firewalld)
CGroup: /system.slice/firewalld.service
`-4862 /usr/bin/python -Es /usr/sbin/firewalld --nofork --nopid
Mar 13 06:30:25 clients firewalld[4862]: WARNING: ipset not usable, disabling ipset usage in firewall.
Mar 13 06:30:26 clients firewalld[4862]: WARNING: ICMP type 'beyond-scope' is not supported by the kernel for ipv6.
Mar 13 06:30:26 clients firewalld[4862]: WARNING: beyond-scope: INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
Mar 13 06:30:26 clients firewalld[4862]: WARNING: ICMP type 'failed-policy' is not supported by the kernel for ipv6.
Mar 13 06:30:26 clients firewalld[4862]: WARNING: failed-policy: INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
Mar 13 06:30:26 clients firewalld[4862]: WARNING: ICMP type 'reject-route' is not supported by the kernel for ipv6.
Mar 13 06:30:26 clients firewalld[4862]: WARNING: reject-route: INVALID_ICMPTYPE: No supported ICMP type., ignoring for run-time.
Mar 13 06:30:26 clients firewalld[4862]: ERROR: Failed to read file "/proc/sys/net/netfilter/nf_conntrack_helper": [Errno 2] No such file or directory: '/p...ck_helper'
Mar 13 06:30:26 clients firewalld[4862]: WARNING: Failed to get and parse nf_conntrack_helper setting
Mar 13 06:30:26 clients firewalld[4862]: WARNING: ebtables not usable, disabling ethernet bridge firewall.
Just tried this:
[root@me ~]# systemctl status cwpsrv.service
* cwpsrv.service - CentOS Web Panel service (daemon)
Loaded: loaded (/usr/lib/systemd/system/cwpsrv.service; enabled; vendor preset: disabled)
Active: activating (auto-restart) (Result: exit-code) since Tue 2018-03-13 07:55:06 UTC; 4s ago
Process: 1922 ExecStartPre=/usr/local/cwpsrv/bin/cwpsrv -t (code=exited, status=1/FAILURE)
Mar 13 07:55:06 clients systemd[1]: Failed to start CentOS Web Panel servic...).
Mar 13 07:55:06 clients systemd[1]: Unit cwpsrv.service entered failed state.
Mar 13 07:55:06 clients systemd[1]: cwpsrv.service failed.
Hint: Some lines were ellipsized, use -l to show in full.
I don't know what to do and I'm in the middle of a project.
Any help appreciated
13
Installation / Centos 7 - PHP 7.1.15 where is cli and fpm located?
« on: March 11, 2018, 11:15:34 AM »
Hi,
I setup Centos 7 with CWP 7 and switched the default php version to 7.1.15.
My applications required a few extra extensions,
I'm following this tutorial to install mailparse link
I got stuck at:
CONFIGURATION:
- add extension =mailparse.so to php.ini under cli and fpm (in dynamics extensions)
sudo nano /etc/php/7.0/cli/php.ini
sudo nano /etc/php/7.0/fpm/php.ini
I can't find the path to the cli and fmp ini files. I mean etc/php doesn't exist at this location.
I mean /etc/php/ doesn't exist.
I can see cli is running:
[root@me/]# php --version
PHP 7.1.15 (cli) (built: Mar 9 2018 07:04:44) ( NTS )
Copyright (c) 1997-2018 The PHP Group
Zend Engine v3.1.0, Copyright (c) 1998-2018 Zend Technologies
with the ionCube PHP Loader (enabled) + Intrusion Protection from ioncube24.com (unconfigured) v10.2.0, C
opyright (c) 2002-2018, by ionCube Ltd.
I setup Centos 7 with CWP 7 and switched the default php version to 7.1.15.
My applications required a few extra extensions,
I'm following this tutorial to install mailparse link
I got stuck at:
CONFIGURATION:
- add extension =mailparse.so to php.ini under cli and fpm (in dynamics extensions)
sudo nano /etc/php/7.0/cli/php.ini
sudo nano /etc/php/7.0/fpm/php.ini
I can't find the path to the cli and fmp ini files. I mean etc/php doesn't exist at this location.
I mean /etc/php/ doesn't exist.
I can see cli is running:
[root@me/]# php --version
PHP 7.1.15 (cli) (built: Mar 9 2018 07:04:44) ( NTS )
Copyright (c) 1997-2018 The PHP Group
Zend Engine v3.1.0, Copyright (c) 1998-2018 Zend Technologies
with the ionCube PHP Loader (enabled) + Intrusion Protection from ioncube24.com (unconfigured) v10.2.0, C
opyright (c) 2002-2018, by ionCube Ltd.
14
SSL / SSL vHost Manager - Notice: Undefined variable after creating AutoSSL Cert
« on: February 27, 2018, 08:11:23 PM »
Hi,
I just installed CWP on Centos 7 and I really like what I see,
When I got to VHosts Manager and select AutoSSL then Install SSL
It says: AutoSSL installation for domain clients.domain.com success!
But I see two warning above that:
Notice: Undefined variable: .(962 ([*66 in /usr/local/cwpsrv/htdocs/resources/admin/include/hooks.php on line 0
Notice: Undefined variable: .(962 ([*66 in /usr/local/cwpsrv/htdocs/resources/admin/include/hooks.php on line 0
The subdomain seems to be secure behind SSL when I use https, so I guess that's working.
Any odeas appreciated, new to thing.
I just installed CWP on Centos 7 and I really like what I see,
When I got to VHosts Manager and select AutoSSL then Install SSL
It says: AutoSSL installation for domain clients.domain.com success!
But I see two warning above that:
Notice: Undefined variable: .(962 ([*66 in /usr/local/cwpsrv/htdocs/resources/admin/include/hooks.php on line 0
Notice: Undefined variable: .(962 ([*66 in /usr/local/cwpsrv/htdocs/resources/admin/include/hooks.php on line 0
The subdomain seems to be secure behind SSL when I use https, so I guess that's working.
Any odeas appreciated, new to thing.
Pages: [1]
