Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Automata

Pages: [1] 2 3 ... 12
1
PHP Selector / Re: How to add PHP 7.4 to PHP Selector 2 (CWP Pro)?
« on: June 18, 2020, 07:05:20 AM »
It seems that PHP 7.4 is already available on the panel.
Any news about this update?

I'm already installing it to test

I have installed and not work !

2
Information / Re: Plans to support CentOS 8?
« on: June 18, 2020, 07:02:20 AM »
I know this has been mentioned before.

But now that Red Hat announced CentOS 8.2.2004 as the currently supported version of CentOS from RedHat 8.4, does CWP have an estimated date?

+1 for me !

3
working on it

Hi "Sandeep", for me not work i have deleted PHP-FPM 7.3 and i have installed and resetted the php 7.4 options.

I have this error:

No package 'oniguruma' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables ONIG_CFLAGS
and ONIG_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
make: *** No targets specified and no makefile found. Stop.
make: *** No rule to make target `install'. Stop.
mkdir: cannot create directory '/opt/alt/php-fpm74/usr/var/sockets/': No such file or directory
mkdir: cannot create directory '/opt/alt/php-fpm74/usr/etc/php-fpm.d/': No such file or directory
mkdir: cannot create directory '/opt/alt/php-fpm74/usr/etc/php-fpm.d/users/': No such file or directory
/usr/local/src/php-fpm-7.4.sh: line 98: /opt/alt/php-fpm74/usr/etc/php-fpm.d/users.conf: No such file or directory
/usr/local/src/php-fpm-7.4.sh: line 99: /opt/alt/php-fpm74/usr/etc/php-fpm.conf: No such file or directory
/usr/local/src/php-fpm-7.4.sh: line 101: /opt/alt/php-fpm74/usr/etc/php-fpm.d/cwpsvc.conf: No such file or directory
cp: cannot stat 'sapi/fpm/php-fpm.service': No such file or directory
sed: can't read /usr/lib/systemd/system/php-fpm74.service: No such file or directory
sed: can't read /usr/lib/systemd/system/php-fpm74.service: No such file or directory
Failed to execute operation: No such file or directory
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
Skipping as php build failed
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
Skipping as php build failed
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
Skipping as php build failed
exe:/opt/alt/php-fpm74/usr/sbin/php-fpm
Redirecting to /bin/systemctl restart httpd.service

Build Completed
###################

Error:Can't add notification!



Please help me and thanks in advance for the support.

4
Hi "Sandeep",

I have installed latest CWP PRO update from CWP PRO v0.9.8.990 to CWP PRO v0.9.8.991 and the update to PHP-FPM v7.4.x not work.

Please help to solve this problem.

Thanks in advance for the support.

5
working on it

Hi "Sandeep",

Thanks for the support, you are the Number ONE !

7
Hi, same problem for me, the update to PHP-FPM 7.4.x not work.

Please CWP Team help to solve this problem.

Thanks in advance for the support.

8
Mod_Security / ModSecurity works on NGINX + PHP-FPM webserver ?
« on: June 16, 2020, 01:30:10 PM »
Hi,

ModSecurity works on NGINX + PHP-FPM webserver ?

Thanks in advance for the support.

9
Updates / Re: New update available?
« on: May 21, 2020, 04:42:31 PM »
Please try again and let me know if it worked for you.

Hi,

The update worked for me.

Update successfully performed for CWP PRO (Control Web Panel Pro) from version 0.9.8.976 to version 0.9.8.979

10
Updates / Re: New update available?
« on: May 21, 2020, 02:56:49 PM »
Thanks guy’s,

Then I am not the only one.
Then my follow question to the developers:
Fix this problem. 😁

 ;D +1 for me !

11
Updates / Re: New update available?
« on: May 21, 2020, 12:42:07 PM »
Hi, i also confirm that the same problem also occurs for me.

12
CentOS-WebPanel Bugs / Re: Apache vhosts contain typo
« on: May 14, 2020, 07:49:25 PM »
Every Apache vhost in /usr/local/apache/conf.d/vhosts/ contains a typo:
Code: [Select]
ProxyPassReverse /roundcube https://127.0.0.1:2031/roudcube/should be
Code: [Select]
ProxyPassReverse /roundcube https://127.0.0.1:2031/roundcube/(missing the n in roundcube )

Hi, "overseer",

Thanks a lot for the report, i just proceeded to open a ticket as a bug ( https://bugs.control-webpanel.com/login_page.php ) hoping that the CWP Team will solve this error soon.

Good day for you, bye !


13
Updates / Re: sh update_cwp script giving errors
« on: May 14, 2020, 12:57:46 PM »
Please check from https://opentechy.com/how-to-fix-gdbus-errororg-freedesktop-policykit1-error-failed/

Hi "evansa",

The solution you posted and suggested works perfectly.

Thanks for the support.

14
Hi,

First of all i wish to congratulate all the programmers of both CWP (Control Web Panel) and CWP (Control Web Panel) PRO for the excellent work they do and for the excellent product they have created, truly excellent from all points of view.
Congratulations also for the new and beautiful official website of CWP and CWP PRO https://control-webpanel.com/

Having said that, i ask you to consider from your next CWP (Control Web Panel) and CWP (Control Web Panel) PRO release, updating NGINX Stable v1.16.1 to the latest version of NGINX Stable v1.18.0 which was released on 21 April 2020.

This is the official announce and / or news link for NGINX Stable v1.18.0: http://nginx.org/

This is the official download link page for NGINX Stable v1.18.0: http://nginx.org/en/download.html

This is the official changelog link for NGINX Stable v1.18.0: http://nginx.org/en/CHANGES-1.18

Among the changes made to Nginx 1.18 that follow the numerous development versions of Nginx 1.17 for example and just to mention a few there are:

- Variables support in more directives.

- Security work including a CVE fix for where an HTTP/2 client might cause excessive memory consumption and CPU Usage.

- A fix where Nginx might hog the CPU in certain conditions, among many other bug fixes.

- OpenSSL 0.9.8 or higher is now required.

Full changelog for NGINX Stable v1.18.0 (all changes in this list are included in NGINX Stable v1.18.0) :

Changes with nginx 1.18.0                                        21 Apr 2020

    *) 1.18.x stable branch.

Changes with nginx 1.17.10                                       14 Apr 2020

    *) Feature: the "auth_delay" directive.

Changes with nginx 1.17.9                                        03 Mar 2020

    *) Change: now nginx does not allow several "Host" request header lines.

    *) Bugfix: nginx ignored additional "Transfer-Encoding" request header
       lines.

    *) Bugfix: socket leak when using HTTP/2.

    *) Bugfix: a segmentation fault might occur in a worker process if OCSP
       stapling was used.

    *) Bugfix: in the ngx_http_mp4_module.

    *) Bugfix: nginx used status code 494 instead of 400 if errors with code
       494 were redirected with the "error_page" directive.

    *) Bugfix: socket leak when using subrequests in the njs module and the
       "aio" directive.

Changes with nginx 1.17.8                                        21 Jan 2020

    *) Feature: variables support in the "grpc_pass" directive.

    *) Bugfix: a timeout might occur while handling pipelined requests in an
       SSL connection; the bug had appeared in 1.17.5.

    *) Bugfix: in the "debug_points" directive when using HTTP/2.
       Thanks to Daniil Bondarev.

Changes with nginx 1.17.7                                        24 Dec 2019

    *) Bugfix: a segmentation fault might occur on start or during
       reconfiguration if the "rewrite" directive with an empty replacement
       string was used in the configuration.

    *) Bugfix: a segmentation fault might occur in a worker process if the
       "break" directive was used with the "alias" directive or with the
       "proxy_pass" directive with a URI.

    *) Bugfix: the "Location" response header line might contain garbage if
       the request URI was rewritten to the one containing a null character.

    *) Bugfix: requests with bodies were handled incorrectly when returning
       redirections with the "error_page" directive; the bug had appeared in
       0.7.12.

    *) Bugfix: socket leak when using HTTP/2.

    *) Bugfix: a timeout might occur while handling pipelined requests in an
       SSL connection; the bug had appeared in 1.17.5.

    *) Bugfix: in the ngx_http_dav_module.

Changes with nginx 1.17.6                                        19 Nov 2019

    *) Feature: the $proxy_protocol_server_addr and
       $proxy_protocol_server_port variables.

    *) Feature: the "limit_conn_dry_run" directive.

    *) Feature: the $limit_req_status and $limit_conn_status variables.

Changes with nginx 1.17.5                                        22 Oct 2019

    *) Feature: now nginx uses ioctl(FIONREAD), if available, to avoid
       reading from a fast connection for a long time.

    *) Bugfix: incomplete escaped characters at the end of the request URI
       were ignored.

    *) Bugfix: "/." and "/.." at the end of the request URI were not
       normalized.

    *) Bugfix: in the "merge_slashes" directive.

    *) Bugfix: in the "ignore_invalid_headers" directive.
       Thanks to Alan Kemp.

    *) Bugfix: nginx could not be built with MinGW-w64 gcc 8.1 or newer.

Changes with nginx 1.17.4                                        24 Sep 2019

    *) Change: better detection of incorrect client behavior in HTTP/2.

    *) Change: in handling of not fully read client request body when
       returning errors in HTTP/2.

    *) Bugfix: the "worker_shutdown_timeout" directive might not work when
       using HTTP/2.

    *) Bugfix: a segmentation fault might occur in a worker process when
       using HTTP/2 and the "proxy_request_buffering" directive.

    *) Bugfix: the ECONNABORTED error log level was "crit" instead of
       "error" on Windows when using SSL.

    *) Bugfix: nginx ignored extra data when using chunked transfer
       encoding.

    *) Bugfix: nginx always returned the 500 error if the "return" directive
       was used and an error occurred during reading client request body.

    *) Bugfix: in memory allocation error handling.

Changes with nginx 1.17.3                                        13 Aug 2019

    *) Security: when using HTTP/2 a client might cause excessive memory
       consumption and CPU usage (CVE-2019-9511, CVE-2019-9513,
       CVE-2019-9516).

    *) Bugfix: "zero size buf" alerts might appear in logs when using
       gzipping; the bug had appeared in 1.17.2.

    *) Bugfix: a segmentation fault might occur in a worker process if the
       "resolver" directive was used in SMTP proxy.

Changes with nginx 1.17.2                                        23 Jul 2019

    *) Change: minimum supported zlib version is 1.2.0.4.
       Thanks to Ilya Leoshkevich.

    *) Change: the $r->internal_redirect() embedded perl method now expects
       escaped URIs.

    *) Feature: it is now possible to switch to a named location using the
       $r->internal_redirect() embedded perl method.

    *) Bugfix: in error handling in embedded perl.

    *) Bugfix: a segmentation fault might occur on start or during
       reconfiguration if hash bucket size larger than 64 kilobytes was used
       in the configuration.

    *) Bugfix: nginx might hog CPU during unbuffered proxying and when
       proxying WebSocket connections if the select, poll, or /dev/poll
       methods were used.

    *) Bugfix: in the ngx_http_xslt_filter_module.

    *) Bugfix: in the ngx_http_ssi_filter_module.

Changes with nginx 1.17.1                                        25 Jun 2019

    *) Feature: the "limit_req_dry_run" directive.

    *) Feature: when using the "hash" directive inside the "upstream" block
       an empty hash key now triggers round-robin balancing.
       Thanks to Niklas Keller.

    *) Bugfix: a segmentation fault might occur in a worker process if
       caching was used along with the "image_filter" directive, and errors
       with code 415 were redirected with the "error_page" directive; the
       bug had appeared in 1.11.10.

    *) Bugfix: a segmentation fault might occur in a worker process if
       embedded perl was used; the bug had appeared in 1.7.3.

Changes with nginx 1.17.0                                        21 May 2019

    *) Feature: variables support in the "limit_rate" and "limit_rate_after"
       directives.

    *) Feature: variables support in the "proxy_upload_rate" and
       "proxy_download_rate" directives in the stream module.

    *) Change: minimum supported OpenSSL version is 0.9.8.

    *) Change: now the postpone filter is always built.

    *) Bugfix: the "include" directive did not work inside the "if" and
       "limit_except" blocks.

    *) Bugfix: in byte ranges processing.

I know you are always very busy developing CWP but i hope you can consider this suggestion of mine which i believe would be appreciated by all users of CWP (Control Web Panel) and CWP (Control Web Panel) PRO !

Thanks in advance for the support.

15
...

All problems were solved very quickly thanks to the help provided by "rcschaff" through private messages.

I want to personally thank "rcschaff" who has proven to be an excellent programmer and also very patient, courteous and helpful.

Thanks so much "rcschaff" !

 :)

Pages: [1] 2 3 ... 12