Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mohammeddahwi

Pages: [1]
1
CentOS 7 Problems / Help !!!! How to configure Magento 2 With CWP
« on: January 01, 2020, 11:29:21 AM »
Hi,
I set my magento host in the following method:
Niginx (80,443)-->Varnish(82)-->Apache(8181)-->Php-fpm

With varnsih not working, magneto works fine, but when running magento with varnsih i get backend fetch failed error 503.
This is the VCL file generated by magneto. Can you check if it is correct
Code: [Select]
# VCL version 5.0 is not supported so it should be 4.0 even though actually used Varnish version is 5
vcl 4.0;

import std;
# The minimal Varnish version is 5.0
# For SSL offloading, pass the following header in your proxy server or load balancer: 'X-Forwarded-Proto: https'

backend default {
    .host = "Domain ip address X.X.X.X";
    .port = "8181";
    .first_byte_timeout = 600s;
    .probe = {
        .url = "/pub/health_check.php";
        .timeout = 2s;
        .interval = 5s;
        .window = 10;
        .threshold = 5;
   }
}

acl purge {
    "localhost";
}

sub vcl_recv {
    if (req.method == "PURGE") {
        if (client.ip !~ purge) {
            return (synth(405, "Method not allowed"));
        }
        # To use the X-Pool header for purging varnish during automated deployments, make sure the X-Pool header
        # has been added to the response in your backend server config. This is used, for example, by the
        # capistrano-magento2 gem for purging old content from varnish during it's deploy routine.
        if (!req.http.X-Magento-Tags-Pattern && !req.http.X-Pool) {
            return (synth(400, "X-Magento-Tags-Pattern or X-Pool header required"));
        }
        if (req.http.X-Magento-Tags-Pattern) {
          ban("obj.http.X-Magento-Tags ~ " + req.http.X-Magento-Tags-Pattern);
        }
        if (req.http.X-Pool) {
          ban("obj.http.X-Pool ~ " + req.http.X-Pool);
        }
        return (synth(200, "Purged"));
    }

    if (req.method != "GET" &&
        req.method != "HEAD" &&
        req.method != "PUT" &&
        req.method != "POST" &&
        req.method != "TRACE" &&
        req.method != "OPTIONS" &&
        req.method != "DELETE") {
          /* Non-RFC2616 or CONNECT which is weird. */
          return (pipe);
    }

    # We only deal with GET and HEAD by default
    if (req.method != "GET" && req.method != "HEAD") {
        return (pass);
    }

    # Bypass shopping cart, checkout and search requests
    if (req.url ~ "/checkout" || req.url ~ "/catalogsearch") {
        return (pass);
    }

    # Bypass health check requests
    if (req.url ~ "/pub/health_check.php") {
        return (pass);
    }

    # Set initial grace period usage status
    set req.http.grace = "none";

    # normalize url in case of leading HTTP scheme and domain
    set req.url = regsub(req.url, "^http[s]?://", "");

    # collect all cookies
    std.collect(req.http.Cookie);

    # Compression filter. See https://www.varnish-cache.org/trac/wiki/FAQ/Compression
    if (req.http.Accept-Encoding) {
        if (req.url ~ "\.(jpg|jpeg|png|gif|gz|tgz|bz2|tbz|mp3|ogg|swf|flv)$") {
            # No point in compressing these
            unset req.http.Accept-Encoding;
        } elsif (req.http.Accept-Encoding ~ "gzip") {
            set req.http.Accept-Encoding = "gzip";
        } elsif (req.http.Accept-Encoding ~ "deflate" && req.http.user-agent !~ "MSIE") {
            set req.http.Accept-Encoding = "deflate";
        } else {
            # unknown algorithm
            unset req.http.Accept-Encoding;
        }
    }

    # Remove all marketing get parameters to minimize the cache objects
    if (req.url ~ "(\?|&)(gclid|cx|ie|cof|siteurl|zanpid|origin|fbclid|mc_[a-z]+|utm_[a-z]+|_bta_[a-z]+)=") {
        set req.url = regsuball(req.url, "(gclid|cx|ie|cof|siteurl|zanpid|origin|fbclid|mc_[a-z]+|utm_[a-z]+|_bta_[a-z]+)=[-_A-z0-9+()%.]+&?", "");
        set req.url = regsub(req.url, "[?|&]+$", "");
    }

    # Static files caching
    if (req.url ~ "^/(pub/)?(media|static)/") {
        # Static files should not be cached by default
        return (pass);

        # But if you use a few locales and don't use CDN you can enable caching static files by commenting previous line (#return (pass);) and uncommenting next 3 lines
        #unset req.http.Https;
        #unset req.http.X-Forwarded-Proto;
        #unset req.http.Cookie;
    }

    return (hash);
}

sub vcl_hash {
    if (req.http.cookie ~ "X-Magento-Vary=") {
        hash_data(regsub(req.http.cookie, "^.*?X-Magento-Vary=([^;]+);*.*$", "\1"));
    }

    # For multi site configurations to not cache each other's content
    if (req.http.host) {
        hash_data(req.http.host);
    } else {
        hash_data(server.ip);
    }

    # To make sure http users don't see ssl warning
    if (req.http.X-Forwarded-Proto) {
        hash_data(req.http.X-Forwarded-Proto);
    }
   

    if (req.url ~ "/graphql") {
        call process_graphql_headers;
    }
}

sub process_graphql_headers {
    if (req.http.Store) {
        hash_data(req.http.Store);
    }
    if (req.http.Content-Currency) {
        hash_data(req.http.Content-Currency);
    }
}

sub vcl_backend_response {

    set beresp.grace = 3d;

    if (beresp.http.content-type ~ "text") {
        set beresp.do_esi = true;
    }

    if (bereq.url ~ "\.js$" || beresp.http.content-type ~ "text") {
        set beresp.do_gzip = true;
    }

    if (beresp.http.X-Magento-Debug) {
        set beresp.http.X-Magento-Cache-Control = beresp.http.Cache-Control;
    }

    # cache only successfully responses and 404s
    if (beresp.status != 200 && beresp.status != 404) {
        set beresp.ttl = 0s;
        set beresp.uncacheable = true;
        return (deliver);
    } elsif (beresp.http.Cache-Control ~ "private") {
        set beresp.uncacheable = true;
        set beresp.ttl = 86400s;
        return (deliver);
    }

    # validate if we need to cache it and prevent from setting cookie
    if (beresp.ttl > 0s && (bereq.method == "GET" || bereq.method == "HEAD")) {
        unset beresp.http.set-cookie;
    }

   # If page is not cacheable then bypass varnish for 2 minutes as Hit-For-Pass
   if (beresp.ttl <= 0s ||
       beresp.http.Surrogate-control ~ "no-store" ||
       (!beresp.http.Surrogate-Control &&
       beresp.http.Cache-Control ~ "no-cache|no-store") ||
       beresp.http.Vary == "*") {
        # Mark as Hit-For-Pass for the next 2 minutes
        set beresp.ttl = 120s;
        set beresp.uncacheable = true;
    }

    return (deliver);
}

sub vcl_deliver {
    if (resp.http.X-Magento-Debug) {
        if (resp.http.x-varnish ~ " ") {
            set resp.http.X-Magento-Cache-Debug = "HIT";
            set resp.http.Grace = req.http.grace;
        } else {
            set resp.http.X-Magento-Cache-Debug = "MISS";
        }
    } else {
        unset resp.http.Age;
    }

    # Not letting browser to cache non-static files.
    if (resp.http.Cache-Control !~ "private" && req.url !~ "^/(pub/)?(media|static)/") {
        set resp.http.Pragma = "no-cache";
        set resp.http.Expires = "-1";
        set resp.http.Cache-Control = "no-store, no-cache, must-revalidate, max-age=0";
    }

    unset resp.http.X-Magento-Debug;
    unset resp.http.X-Magento-Tags;
    unset resp.http.X-Powered-By;
    unset resp.http.Server;
    unset resp.http.X-Varnish;
    unset resp.http.Via;
    unset resp.http.Link;
}

sub vcl_hit {
    if (obj.ttl >= 0s) {
        # Hit within TTL period
        return (deliver);
    }
    if (std.healthy(req.backend_hint)) {
        if (obj.ttl + 300s > 0s) {
            # Hit after TTL expiration, but within grace period
            set req.http.grace = "normal (healthy server)";
            return (deliver);
        } else {
            # Hit after TTL and grace expiration
            return (miss);
        }
    } else {
        # server is not healthy, retrieve from cache
        set req.http.grace = "unlimited (unhealthy server)";
        return (deliver);
    }
}
The code above i edited it because it didnt work, varnish couldnt start when i set it to my host. It gave an error on the "backend default" maybe because this is used in default cwp varnish vcl so i used a random name instead of default like this:
Code: [Select]
# VCL version 5.0 is not supported so it should be 4.0 even though actually used Varnish version is 5
vcl 4.0;

import std;
# The minimal Varnish version is 5.0
# For SSL offloading, pass the following header in your proxy server or load balancer: 'X-Forwarded-Proto: https'

backend cwp3b9aab134d648812c69804ead113476c {
    .host = "localhost";
    .port = "8181";
    .first_byte_timeout = 600s;
    .probe = {
        .url = "/pub/health_check.php";
        .timeout = 2s;
        .interval = 5s;
        .window = 10;
        .threshold = 5;
   }
}

acl purge {
    "localhost";
}

sub vcl_recv {
if (req.http.host ~ "domain.com") {
   set req.backend_hint = cwp3b9aab134d648812c69804ead113476c;
}
    if (req.method == "PURGE") {
        if (client.ip !~ purge) {
            return (synth(405, "Method not allowed"));
        }
        # To use the X-Pool header for purging varnish during automated deployments, make sure the X-Pool header
        # has been added to the response in your backend server config. This is used, for example, by the
        # capistrano-magento2 gem for purging old content from varnish during it's deploy routine.
        if (!req.http.X-Magento-Tags-Pattern && !req.http.X-Pool) {
            return (synth(400, "X-Magento-Tags-Pattern or X-Pool header required"));
        }
        if (req.http.X-Magento-Tags-Pattern) {
          ban("obj.http.X-Magento-Tags ~ " + req.http.X-Magento-Tags-Pattern);
        }
        if (req.http.X-Pool) {
          ban("obj.http.X-Pool ~ " + req.http.X-Pool);
        }
        return (synth(200, "Purged"));
    }

    if (req.method != "GET" &&
        req.method != "HEAD" &&
        req.method != "PUT" &&
        req.method != "POST" &&
        req.method != "TRACE" &&
        req.method != "OPTIONS" &&
        req.method != "DELETE") {
          /* Non-RFC2616 or CONNECT which is weird. */
          return (pipe);
    }

    # We only deal with GET and HEAD by default
    if (req.method != "GET" && req.method != "HEAD") {
        return (pass);
    }

    # Bypass shopping cart, checkout and search requests
    if (req.url ~ "/checkout" || req.url ~ "/catalogsearch") {
        return (pass);
    }

    # Bypass health check requests
    if (req.url ~ "/pub/health_check.php") {
        return (pass);
    }

    # Set initial grace period usage status
    set req.http.grace = "none";

    # normalize url in case of leading HTTP scheme and domain
    set req.url = regsub(req.url, "^http[s]?://", "");

    # collect all cookies
    std.collect(req.http.Cookie);

    # Compression filter. See https://www.varnish-cache.org/trac/wiki/FAQ/Compression
    if (req.http.Accept-Encoding) {
        if (req.url ~ "\.(jpg|jpeg|png|gif|gz|tgz|bz2|tbz|mp3|ogg|swf|flv)$") {
            # No point in compressing these
            unset req.http.Accept-Encoding;
        } elsif (req.http.Accept-Encoding ~ "gzip") {
            set req.http.Accept-Encoding = "gzip";
        } elsif (req.http.Accept-Encoding ~ "deflate" && req.http.user-agent !~ "MSIE") {
            set req.http.Accept-Encoding = "deflate";
        } else {
            # unknown algorithm
            unset req.http.Accept-Encoding;
        }
    }

    # Remove all marketing get parameters to minimize the cache objects
    if (req.url ~ "(\?|&)(gclid|cx|ie|cof|siteurl|zanpid|origin|fbclid|mc_[a-z]+|utm_[a-z]+|_bta_[a-z]+)=") {
        set req.url = regsuball(req.url, "(gclid|cx|ie|cof|siteurl|zanpid|origin|fbclid|mc_[a-z]+|utm_[a-z]+|_bta_[a-z]+)=[-_A-z0-9+()%.]+&?", "");
        set req.url = regsub(req.url, "[?|&]+$", "");
    }

    # Static files caching
    if (req.url ~ "^/(pub/)?(media|static)/") {
        # Static files should not be cached by default
        return (pass);

        # But if you use a few locales and don't use CDN you can enable caching static files by commenting previous line (#return (pass);) and uncommenting next 3 lines
        #unset req.http.Https;
        #unset req.http.X-Forwarded-Proto;
        #unset req.http.Cookie;
    }

    return (hash);
}

sub vcl_hash {
    if (req.http.cookie ~ "X-Magento-Vary=") {
        hash_data(regsub(req.http.cookie, "^.*?X-Magento-Vary=([^;]+);*.*$", "\1"));
    }

    # For multi site configurations to not cache each other's content
    if (req.http.host) {
        hash_data(req.http.host);
    } else {
        hash_data(server.ip);
    }

    # To make sure http users don't see ssl warning
    if (req.http.X-Forwarded-Proto) {
        hash_data(req.http.X-Forwarded-Proto);
    }
   

    if (req.url ~ "/graphql") {
        call process_graphql_headers;
    }
}

sub process_graphql_headers {
    if (req.http.Store) {
        hash_data(req.http.Store);
    }
    if (req.http.Content-Currency) {
        hash_data(req.http.Content-Currency);
    }
}

sub vcl_backend_response {

    set beresp.grace = 3d;

    if (beresp.http.content-type ~ "text") {
        set beresp.do_esi = true;
    }

    if (bereq.url ~ "\.js$" || beresp.http.content-type ~ "text") {
        set beresp.do_gzip = true;
    }

    if (beresp.http.X-Magento-Debug) {
        set beresp.http.X-Magento-Cache-Control = beresp.http.Cache-Control;
    }

    # cache only successfully responses and 404s
    if (beresp.status != 200 && beresp.status != 404) {
        set beresp.ttl = 0s;
        set beresp.uncacheable = true;
        return (deliver);
    } elsif (beresp.http.Cache-Control ~ "private") {
        set beresp.uncacheable = true;
        set beresp.ttl = 86400s;
        return (deliver);
    }

    # validate if we need to cache it and prevent from setting cookie
    if (beresp.ttl > 0s && (bereq.method == "GET" || bereq.method == "HEAD")) {
        unset beresp.http.set-cookie;
    }

   # If page is not cacheable then bypass varnish for 2 minutes as Hit-For-Pass
   if (beresp.ttl <= 0s ||
       beresp.http.Surrogate-control ~ "no-store" ||
       (!beresp.http.Surrogate-Control &&
       beresp.http.Cache-Control ~ "no-cache|no-store") ||
       beresp.http.Vary == "*") {
        # Mark as Hit-For-Pass for the next 2 minutes
        set beresp.ttl = 120s;
        set beresp.uncacheable = true;
    }

    return (deliver);
}

sub vcl_deliver {
    if (resp.http.X-Magento-Debug) {
        if (resp.http.x-varnish ~ " ") {
            set resp.http.X-Magento-Cache-Debug = "HIT";
            set resp.http.Grace = req.http.grace;
        } else {
            set resp.http.X-Magento-Cache-Debug = "MISS";
        }
    } else {
        unset resp.http.Age;
    }

    # Not letting browser to cache non-static files.
    if (resp.http.Cache-Control !~ "private" && req.url !~ "^/(pub/)?(media|static)/") {
        set resp.http.Pragma = "no-cache";
        set resp.http.Expires = "-1";
        set resp.http.Cache-Control = "no-store, no-cache, must-revalidate, max-age=0";
    }

    unset resp.http.X-Magento-Debug;
    unset resp.http.X-Magento-Tags;
    unset resp.http.X-Powered-By;
    unset resp.http.Server;
    unset resp.http.X-Varnish;
    unset resp.http.Via;
    unset resp.http.Link;
}

sub vcl_hit {
    if (obj.ttl >= 0s) {
        # Hit within TTL period
        return (deliver);
    }
    if (std.healthy(req.backend_hint)) {
        if (obj.ttl + 300s > 0s) {
            # Hit after TTL expiration, but within grace period
            set req.http.grace = "normal (healthy server)";
            return (deliver);
        } else {
            # Hit after TTL and grace expiration
            return (miss);
        }
    } else {
        # server is not healthy, retrieve from cache
        set req.http.grace = "unlimited (unhealthy server)";
        return (deliver);
    }
}

This is my new varnsih config for my host and varnsih could run without error. But the site is failing to open.
In log i am getting error to reach file /pub/health_check.php found in the probe above.
This is my error i get when i open the site.
Code: [Select]
Error 503 Backend fetch failed

Backend fetch failed
Guru Meditation:
I think Niginx is the problem, because its not allowing the access for this file so varnsih is failing.
I hope anyone can help, in provinding template files for niginx and apache and varnsih and php-fpm for magento similar to Wordpress.

2
I want to use apache and varnish. i dont want to use niginx.

3
I noticed That php-fpw works for pages requested but for cli it is not working, since php -v shows version 5.6 while phpinfo shows version 7.2.
The cli php is important because i am installing magento 2 and it requires php 7.2 version.
How can this be fixed

4
CentOS 7 Problems / Major Error php-fpm not working for user domain account
« on: September 07, 2019, 10:16:53 PM »
Hi,
I enabled webserver apache,niginx,varnish,php-fpm.
I installed php-fpm version 7.2.11
using Webserver doamin conf, i configured the user domain to use php-fpm and ticked the option to rebuild config for this domain.
I restarted apache, php-fpm and tried many other things but the same, the user account shows that it is using php 5.6.37.

I run the command: /bin/systemctl status php-fpm72.service
i get this:
PID file /opt/alt/php-fpm72/usr/var/run/php-fpm.pid not readable (yet?) after reload.

Can any one help

5
CentOS 7 Problems / Cache cwp admin and user panel via swap only
« on: September 07, 2019, 09:24:24 AM »
Hi,
How can i use the swap memory i create to cache the user and admin panel only. While the accounts websites are cached via real memory.

6
CentOS 7 Problems / CWP Hostname Not working
« on: September 06, 2019, 08:21:07 AM »
Hi,
I installed CWP on Centos7, and followed the guide: (lets say my domain is example.com)
1.the first step i did in the installation is:
Code: [Select]
sudo hostname vvv.example.comand then completed my installation sucessfully.
2. my domain example.com is hosted on godaddy, so i went to godaddy and created two hostnames ns22.example.com and ns23.example.com and pointed them to my vps ip address. (both pointed to same ip address)
3. Next on godaddy i changed the default nameservers of my domain example.com and set them to ns22 and ns23.
4. I tried oppening cwp via domain example.com:2087 but didnt work, since it is not resolving correctly.
5. i login to cwp via IP address and setup the hostnames to ns22 and ns23 and did a Bind restart.
6. I tried loggin to cwp via example.com:2087 but no luck
7. I created a new account on cwp for a second domain example2.com
8. At the domain register of the second domain i set the nameservers to ns22.example.com and ns23.example.com
9. The domain example2.com oppened succefully with ssl working also via autossl

These are what i did, i need help in fixing my cwp main domain resolving and ssl for it also.
Note: before i created my nameservers i was pointing example.com to the vps via the vps ip address using A record and it was working normally but ssl was not working, but when i changed the the nameserver of example.com to ns22 and ns23, i was no longer able to access cwp via domain name so i reverted to ip instead.

Pages: [1]