Control Web Panel
WebPanel => Apache => LiteSpeed => Topic started by: blackstar on May 25, 2017, 10:24:17 PM
-
I want to try Litespeed, if the load is good, I will continue. But my sites are not open. What kind of settings do I need to adjust?
http://prntscr.com/fc53ax
There is php 7.1.5 on the server ..
thanks.
-
check this
http://wiki.centos-webpanel.com/default-page-displayed-for-all-domains
-
Hi, I met this problem again.
http://wiki.centos-webpanel.com/default-page-displayed-for-all-domains
and
http://wiki.centos-webpanel.com/litespeed-enterprise-webserver-for-cwp
I made the settings here. but my site is not open. what should I do ?
-
Can someone explain the use of LiteSpeed in detail? I want to use it but there is no detailed usage information.
-
I'm still dealing with this problem. Could someone please explain in detail?
thank you
-
rebuild php from switcher with litespeed option ticked
-
rebuild php from switcher with litespeed option ticked
I made them. but it still does not work. there must be something else. Please give me a hand on this subject I want to use LiteSpeed.
-
You need to check if you are using port 80 or 8181. Check your vhost file for that
-
You need to check if you are using port 80 or 8181. Check your vhost file for that
Thank you. I think this answer is enough for everybody. I go on with CyberPanel. I congratulate you.
-
We use that too for wordpress site only. But many of the option to support apache rewrite is not supported in openlitespeed.
See comparison below
https://www.litespeedtech.com/products/litespeed-web-server/editions
-
We use that too for wordpress site only. But many of the option to support apache rewrite is not supported in openlitespeed.
See comparison below
https://www.litespeedtech.com/products/litespeed-web-server/editions
That's why I wanted to use LiteSpeed. but there is not enough information. Would you like to take 1 hour to explain how to setup?
If you do this in time, you will be very satisfied.
-
What issue are you facing in its setup?
-
What issue are you facing in its setup?
I took vps from vultr for learning purposes. I can reinstall and send you server information. After I was stable I would like to take backup of my own server and install CentOS panel + LiteSpeed.
Can you help ?
-
I dont need login. Did you install lightspeed on yourserver? If yes, then what is the issue?
-
I dont need login. Did you install lightspeed on yourserver? If yes, then what is the issue?
This is the test server. I turned on the site, I installed WordPress with ftp, but again CentOS main page looked.
I will rewrite the server. Let me know in half an hour. My ways with PM. is it OK?
-
Do post here instead of PM.
Re setup server, install litespeed , create user account , install wordpress and paste here output of the commands below
cat /usr/local/apache/conf/sharedip.conf
cat /usr/local/apache/conf.d/vhosts.conf
-
Do post here instead of PM.
Re setup server, install litespeed , create user account , install wordpress and paste here output of the commands below
cat /usr/local/apache/conf/sharedip.conf
cat /usr/local/apache/conf.d/vhosts.conf
Okay thanks. Installation is about to end
-
Do post here instead of PM.
Re setup server, install litespeed , create user account , install wordpress and paste here output of the commands below
cat /usr/local/apache/conf/sharedip.conf
cat /usr/local/apache/conf.d/vhosts.conf
[root@server /]# cat /usr/local/apache/conf/sharedip.conf
<VirtualHost 80.240.20.xxx:80>
ServerName 80.240.20.xxx
DocumentRoot /usr/local/apache/htdocs
ServerAdmin info@centos-webpanel.com
<IfModule mod_suphp.c>
suPHP_UserGroup nobody nobody
</IfModule>
<Proxy "*">
<IfModule mod_security2.c>
SecRuleEngine Off
</IfModule>
</Proxy>
RewriteEngine On
RewriteCond %{HTTP_HOST} !^80.240.20.xxx$
RewriteCond %{HTTP_HOST} ^webmail.
RewriteRule ^/(.*) http://127.0.0.1:2095/$1 [P]
</VirtualHost>
<Directory "/">
AllowOverride All
Require all granted
</Directory>
AND
[root@server /]# cat /usr/local/apache/conf.d/vhosts.conf
# vhost_start mysite.com
<VirtualHost 80.240.20.xxx:8181>
ServerName mysite.com
ServerAlias www.mysite.com
ServerAdmin webmaster@mysite.com
DocumentRoot /home/mysite/public_html
UseCanonicalName Off
ScriptAlias /cgi-bin/ /home/mysite/public_html/cgi-bin/
# Custom settings are loaded below this line (if any exist)
# Include "/usr/local/apache/conf/userdata/mysite/mysite.com/*.conf"
<IfModule mod_userdir.c>
UserDir disabled
UserDir enabled zortinge
</IfModule>
<IfModule mod_suexec.c>
SuexecUserGroup zortinge zortinge
</IfModule>
<IfModule mod_suphp.c>
suPHP_UserGroup zortinge zortinge
suPHP_ConfigPath /home/zortinge
</IfModule>
<Directory "/home/mysite/public_html">
AllowOverride All
</Directory>
</VirtualHost>
# vhost_end mysite.com
================================
So what do I have to do now?
-
goto https://yourserverip:2087/admin/index.php?module=settings
Under apache port. See if there is 8181. If yes then change it to 80 and click on save changes.
got https://yourserverip:2087/admin/index.php?module=vhost_rebuild
click Rebuild All Virtual Hosts
In ssh restart litespeed
service lshttpd restart
Now see if your site is working fine.
-
goto https://yourserverip:2087/admin/index.php?module=settings
Under apache port. See if there is 8181. If yes then change it to 80 and click on save changes.
got https://yourserverip:2087/admin/index.php?module=vhost_rebuild
click Rebuild All Virtual Hosts
In ssh restart litespeed
service lshttpd restart
Now see if your site is working fine.
Thanks WordPress turned on.
Do you have to do something on myip: 7080?
For example, if I need to edit php.ini, which section do I need to adjust?
-
Its same as how previously you used to edit php.ini file.
using 7080 port you can manage litespeed. Navigate to each setting and play with it if you want to learn. :)
I think you are done with litespeed.
-
Its same as how previously you used to edit php.ini file.
using 7080 port you can manage litespeed. Navigate to each setting and play with it if you want to learn. :)
I think you are done with litespeed.
Thank you so much..
Cyberpanel myip:7080 >>> http://prntscr.com/krtq7l
But litespeed : http://prntscr.com/krtqvw
This is empty. Do not I have to do Cache settings from here?
-
litespeed automatically counts vhost created for Apache. Goto https://yourserverip:7080/service/serviceMgr.php . Scroll down and you will see your vhost files used by litespeed for CWP.
-
litespeed automatically counts vhost created for Apache. Goto https://yourserverip:7080/service/serviceMgr.php . Scroll down and you will see your vhost files used by litespeed for CWP.
I understand thank you
I get a new server. What do you recommend Centos 6 or CentOS 7?
-
Obviously Centos 7
https://wiki.centos.org/About/Product
-
Obviously Centos 7
https://wiki.centos.org/About/Product
Okay, thank you again for helping me. Good evening.