Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation / Re: ClamAV will not start - keeps disabling
« on: September 30, 2024, 12:32:44 PM »
Thank you my friend, that seems to have done the trick, nice one
Richard
Richard
2
Installation / ClamAV will not start - keeps disabling
« on: September 30, 2024, 11:53:22 AM »
Hi Guys, having a slight issue with my ClamAV, everytime I start it it disables each time, I clicked the report issue and got this..
Unable to find service file: /usr/local/cwpsrv/htdocs/resources/admin/include/ai_robot/services/ai_service_clamd.php"
and in the status i have..
clamd.service - clamd scanner () daemon
Loaded: loaded (/usr/lib/systemd/system/clamd.service; disabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Mon 2024-09-30 11:36:29 UTC; 13min ago
Docs: man:clamd(
man:clamd.conf(5)
https://www.clamav.net/documents/
Main PID: 6841 (code=exited, status=1/FAILURE)
this is the second fresh install of both almalinux8 and CWP, and still have the issue.
can someone point me in the right direction please..
Richard
Unable to find service file: /usr/local/cwpsrv/htdocs/resources/admin/include/ai_robot/services/ai_service_clamd.php"
and in the status i have..
clamd.service - clamd scanner () daemon
Loaded: loaded (/usr/lib/systemd/system/clamd.service; disabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Mon 2024-09-30 11:36:29 UTC; 13min ago
Docs: man:clamd(
man:clamd.conf(5)
https://www.clamav.net/documents/
Main PID: 6841 (code=exited, status=1/FAILURE)
this is the second fresh install of both almalinux8 and CWP, and still have the issue.
can someone point me in the right direction please..
Richard
3
Installation / Re: Cannot login to admin CWP
« on: September 13, 2024, 12:00:09 PM »
Figured it out myself
I ran 'yum install iptables' then rebooted the server and the firewall was enabled..
Thanks for the help on the other matters guys..
Richard
4
Installation / Re: Cannot login to admin CWP
« on: September 13, 2024, 09:31:40 AM »
I have done a complete reinstall of my VPS with AlmaLinux 8, and still I am unable to enable the firewall.
I used the installer for ----
Installer for CentOS 8/stream, Alma Linux, and Rocky Linux (recommended)
any more ideas of what is causing the issue.
I ran the csf -e as this is what has appeared, and this resulted with the error--
*Error* The path to iptables is either not set or incorrect for IPTABLES [/sbin/iptables] in /etc/csf/csf.conf at /usr/local/csf/lib/ConfigServer/URLGet.pm line 26.
Compilation failed in require at /usr/sbin/csf line 21.
BEGIN failed--compilation aborted at /usr/sbin/csf line 21.
[root@******** ~]#
Getting a little frustrated now, as in the last 5 years of installing CWP I had never had this issue..
Richard
I used the installer for ----
Installer for CentOS 8/stream, Alma Linux, and Rocky Linux (recommended)
any more ideas of what is causing the issue.
I ran the csf -e as this is what has appeared, and this resulted with the error--
*Error* The path to iptables is either not set or incorrect for IPTABLES [/sbin/iptables] in /etc/csf/csf.conf at /usr/local/csf/lib/ConfigServer/URLGet.pm line 26.
Compilation failed in require at /usr/sbin/csf line 21.
BEGIN failed--compilation aborted at /usr/sbin/csf line 21.
[root@******** ~]#
Getting a little frustrated now, as in the last 5 years of installing CWP I had never had this issue..
Richard
5
Installation / Re: Cannot login to admin CWP
« on: September 12, 2024, 10:39:11 AM »
I am Getting
[root@******* ~]# csf -e
*Error* The path to iptables is either not set or incorrect for IPTABLES [/sbin/ iptables] in /etc/csf/csf.conf at /usr/local/csf/lib/ConfigServer/URLGet.pm line 26.
Compilation failed in require at /usr/sbin/csf line 21.
BEGIN failed--compilation aborted at /usr/sbin/csf line 21.
[root@******* ~]# chkconfig --list
[root@******* ~]# csf -e
*Error* The path to iptables is either not set or incorrect for IPTABLES [/sbin/ iptables] in /etc/csf/csf.conf at /usr/local/csf/lib/ConfigServer/URLGet.pm line 26.
Compilation failed in require at /usr/sbin/csf line 21.
BEGIN failed--compilation aborted at /usr/sbin/csf line 21.
[root@******* ~]# chkconfig --list
6
Installation / Re: Cannot login to admin CWP
« on: September 12, 2024, 10:35:44 AM »
Thank you for that, I can now login..
I have done the required settings e.t.c. monet, email, changes ssh port and stuff, but now i cannot activate the firewall keep showing [root@server ~]# csf -e
I have run this in ssh connection but still no joy in activating firewall.
any ideas
Richard
I have done the required settings e.t.c. monet, email, changes ssh port and stuff, but now i cannot activate the firewall keep showing [root@server ~]# csf -e
I have run this in ssh connection but still no joy in activating firewall.
any ideas
Richard
7
Installation / Cannot login to admin CWP
« on: September 11, 2024, 11:08:21 AM »
I having a crazy problem, I had to reinstall my VPS server to Centos 9, has server does not have the os of centos 7 anymore
I have always been able to reinstall the server and CWP without any issues and able to login to CWP admin as root and my root password, but this time no matter what I try I cannot login to CWP admin and it changes the port from the login from 2030 to 2031 in the http login address.
tried changing the admin password and done 3 more reinstalls of VPS and CWP but it will not accept my admin login.
Is there anyone that can point me in the right direction, as I have been using this VPS and CWP for the last 5 years without any issues
Richard
I have always been able to reinstall the server and CWP without any issues and able to login to CWP admin as root and my root password, but this time no matter what I try I cannot login to CWP admin and it changes the port from the login from 2030 to 2031 in the http login address.
tried changing the admin password and done 3 more reinstalls of VPS and CWP but it will not accept my admin login.
Is there anyone that can point me in the right direction, as I have been using this VPS and CWP for the last 5 years without any issues
Richard
8
Addons / Ability to connect to Object Storage
« on: March 16, 2022, 01:24:34 PM »
Hi all
I have a 250gb object storage server, is there a way that I can connect the VPS and Storage together, so that I can use the extra space.
Is this possible..?
I have a 250gb object storage server, is there a way that I can connect the VPS and Storage together, so that I can use the extra space.
Is this possible..?
9
CentOS 7 Problems / Re: memcached and Redis email warnings
« on: May 06, 2021, 06:54:27 PM »
No answer so did what I could, I opened terminal and listed what packages were associated with those services and uninstall the packages, both uninstalled fine and no problems in CWP, also no emails every hour....
10
CentOS 7 Problems / memcached and Redis email warnings
« on: May 06, 2021, 02:28:06 PM »
Hi all, I could not find a solution to this so here goes..
2 emails around every hour:
Account: memcached
Resource: Process Time
Exceeded: 145884 > 1800 (seconds)
Executable: /usr/bin/memcached
Command Line: /usr/bin/memcached -u memcached -p 11211 -m 64 -c 1024
PID: 28237 (Parent PID:28237)
Killed: No
And
Account: redis
Resource: Process Time
Exceeded: 145837 > 1800 (seconds)
Executable: /usr/bin/redis-server
Command Line: /usr/bin/redis-server 127.0.0.1:6379
PID: 31075 (Parent PID:31075)
Killed: No
I have added the services to csf pignore
exe:/usr/sbin/memcached
exe:/usr/bin/redis-server
Also disabled the services in CWP, and removed them as a php service, but still I am getting the emails..
Any ideas
2 emails around every hour:
Account: memcached
Resource: Process Time
Exceeded: 145884 > 1800 (seconds)
Executable: /usr/bin/memcached
Command Line: /usr/bin/memcached -u memcached -p 11211 -m 64 -c 1024
PID: 28237 (Parent PID:28237)
Killed: No
And
Account: redis
Resource: Process Time
Exceeded: 145837 > 1800 (seconds)
Executable: /usr/bin/redis-server
Command Line: /usr/bin/redis-server 127.0.0.1:6379
PID: 31075 (Parent PID:31075)
Killed: No
I have added the services to csf pignore
exe:/usr/sbin/memcached
exe:/usr/bin/redis-server
Also disabled the services in CWP, and removed them as a php service, but still I am getting the emails..
Any ideas
11
CentOS-WebPanel GUI / All service status popups are orange and say warning
« on: May 05, 2021, 12:11:29 PM »
Hi guys, not really a problem, just curiosity, why when I check the status of my server service or mail service, they popup orange and say warning. I am setup and secure as far as I know.
Does it always say this..?
Does it always say this..?
12
CentOS-WebPanel GUI / Re: Login panel for users keeps returning to login
« on: April 28, 2021, 06:59:01 PM »
Managed to fix it myself..
It was the package causing the problem, used the default package and all ok..
It was the package causing the problem, used the default package and all ok..
13
CentOS-WebPanel GUI / Login panel for users keeps returning to login
« on: April 28, 2021, 04:07:13 PM »
Hi all
Have got an annoying problem, I could not login to any of the user panels (5 users), tried 3 different browsers, ended up reinstalling clean copy of CentOS 7 and CWP pro. So have a clean server,but still cannot login to the user panels, just keeps returning to the login panel. It show the user is logged in on the CWP panel. ran - tail -f /usr/local/cwp/php71/var/log/php-fpm*.log
and got the below:
==> /usr/local/cwp/php71/var/log/php-fpm.log <==
[28-Apr-2021 17:58:01] NOTICE: about to trace 17215
[28-Apr-2021 17:58:01] NOTICE: finished trace of 17215
[28-Apr-2021 17:58:06] WARNING: [pool cwpsrv] child 19520, script '/usr/local/cw psrv/htdocs/admin/admin/loader.php' (request: "GET /admin/loader.php?func=get_lo ad&_=1619625316132") executing too slow (5.587582 sec), logging
[28-Apr-2021 17:58:06] NOTICE: child 19520 stopped for tracing
[28-Apr-2021 17:58:06] NOTICE: about to trace 19520
[28-Apr-2021 17:58:06] NOTICE: finished trace of 19520
[28-Apr-2021 17:58:11] WARNING: [pool cwpsrv] child 19521, script '/usr/local/cw psrv/htdocs/admin/admin/loader.php' (request: "GET /admin/loader.php?func=get_lo ad&_=1619625316133") executing too slow (5.583360 sec), logging
[28-Apr-2021 17:58:11] NOTICE: child 19521 stopped for tracing
[28-Apr-2021 17:58:11] NOTICE: about to trace 19521
[28-Apr-2021 17:58:11] NOTICE: finished trace of 19521
==> /usr/local/cwp/php71/var/log/php-fpm-slowlog-cwpsrv.log <==
script_filename = /usr/local/cwpsrv/htdocs/admin/admin/loader.php
[0x00007fd224c1c530] session_start() /usr/local/cwpsrv/htdocs/admin/admin/loader .php:0
[28-Apr-2021 17:58:06] [pool cwpsrv] pid 19520
script_filename = /usr/local/cwpsrv/htdocs/admin/admin/loader.php
[0x00007fd224c1d530] session_start() /usr/local/cwpsrv/htdocs/admin/admin/loader .php:0
[28-Apr-2021 17:58:11] [pool cwpsrv] pid 19521
script_filename = /usr/local/cwpsrv/htdocs/admin/admin/loader.php
[0x00007fd224c1d530] session_start() /usr/local/cwpsrv/htdocs/admin/admin/loader .php:0
==> /usr/local/cwp/php71/var/log/php-fpm-slowlog-cwpsvc.log <==
==> /usr/local/cwp/php71/var/log/php-fpm-slowlog-findit.log <==
can anybody help me with this, even turned the firewall off...but still nothing
Richard
Have got an annoying problem, I could not login to any of the user panels (5 users), tried 3 different browsers, ended up reinstalling clean copy of CentOS 7 and CWP pro. So have a clean server,but still cannot login to the user panels, just keeps returning to the login panel. It show the user is logged in on the CWP panel. ran - tail -f /usr/local/cwp/php71/var/log/php-fpm*.log
and got the below:
==> /usr/local/cwp/php71/var/log/php-fpm.log <==
[28-Apr-2021 17:58:01] NOTICE: about to trace 17215
[28-Apr-2021 17:58:01] NOTICE: finished trace of 17215
[28-Apr-2021 17:58:06] WARNING: [pool cwpsrv] child 19520, script '/usr/local/cw psrv/htdocs/admin/admin/loader.php' (request: "GET /admin/loader.php?func=get_lo ad&_=1619625316132") executing too slow (5.587582 sec), logging
[28-Apr-2021 17:58:06] NOTICE: child 19520 stopped for tracing
[28-Apr-2021 17:58:06] NOTICE: about to trace 19520
[28-Apr-2021 17:58:06] NOTICE: finished trace of 19520
[28-Apr-2021 17:58:11] WARNING: [pool cwpsrv] child 19521, script '/usr/local/cw psrv/htdocs/admin/admin/loader.php' (request: "GET /admin/loader.php?func=get_lo ad&_=1619625316133") executing too slow (5.583360 sec), logging
[28-Apr-2021 17:58:11] NOTICE: child 19521 stopped for tracing
[28-Apr-2021 17:58:11] NOTICE: about to trace 19521
[28-Apr-2021 17:58:11] NOTICE: finished trace of 19521
==> /usr/local/cwp/php71/var/log/php-fpm-slowlog-cwpsrv.log <==
script_filename = /usr/local/cwpsrv/htdocs/admin/admin/loader.php
[0x00007fd224c1c530] session_start() /usr/local/cwpsrv/htdocs/admin/admin/loader .php:0
[28-Apr-2021 17:58:06] [pool cwpsrv] pid 19520
script_filename = /usr/local/cwpsrv/htdocs/admin/admin/loader.php
[0x00007fd224c1d530] session_start() /usr/local/cwpsrv/htdocs/admin/admin/loader .php:0
[28-Apr-2021 17:58:11] [pool cwpsrv] pid 19521
script_filename = /usr/local/cwpsrv/htdocs/admin/admin/loader.php
[0x00007fd224c1d530] session_start() /usr/local/cwpsrv/htdocs/admin/admin/loader .php:0
==> /usr/local/cwp/php71/var/log/php-fpm-slowlog-cwpsvc.log <==
==> /usr/local/cwp/php71/var/log/php-fpm-slowlog-findit.log <==
can anybody help me with this, even turned the firewall off...but still nothing
Richard
Pages: [1]
