Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
16
CentOS-WebPanel Bugs / Re: folder cannot be accessed by IP
« on: July 22, 2018, 10:34:12 AM »
Hi Bullten,
I have tried as your advice:
$ vi /usr/local/apache/conf/sharedip.conf
I changed: <VirtualHost xxx.xxx.xxx.xxx:80>
to: <VirtualHost *:80>
then restart apache:
$ systemctl reload named && systemctl restart named
The issue is still the same.
Any advice?
Thanks
I have tried as your advice:
$ vi /usr/local/apache/conf/sharedip.conf
I changed: <VirtualHost xxx.xxx.xxx.xxx:80>
to: <VirtualHost *:80>
then restart apache:
$ systemctl reload named && systemctl restart named
The issue is still the same.
Any advice?
Thanks
17
CentOS-WebPanel Bugs / Re: folder cannot be accessed by IP
« on: July 22, 2018, 08:15:39 AM »
Thanks for your reply.
I may not be very clear with my question above. Basically, I would like to display my website or an application in a browser via either domain name or IP:
http://www.mydomain.com/apps/
http://my_server_ip/apps/
they both should display the same page content.
What config is required to achieve this?
Cheers
I may not be very clear with my question above. Basically, I would like to display my website or an application in a browser via either domain name or IP:
http://www.mydomain.com/apps/
http://my_server_ip/apps/
they both should display the same page content.
What config is required to achieve this?
Cheers
18
CentOS-WebPanel Bugs / Re: folder cannot be accessed by IP
« on: July 21, 2018, 06:48:34 PM »
Update: I have tried to issue this:
$ chown -R nobody.nobody /usr/local/apache/htdocs/
as suggested on this link:
http://forum.centos-webpanel.com/apache/how-to-setup-website-on-the-ip-address/
It does not work on my server.
Any advice is very appreciated.
Cheers
$ chown -R nobody.nobody /usr/local/apache/htdocs/
as suggested on this link:
http://forum.centos-webpanel.com/apache/how-to-setup-website-on-the-ip-address/
It does not work on my server.
Any advice is very appreciated.
Cheers
19
CentOS-WebPanel Bugs / folder cannot be accessed by IP
« on: July 21, 2018, 06:32:04 PM »
Hi sir,
I am a newbie to CWP panel, but I have great support from this community which is amazing.
I managed to install and configure (including DNS) CWP successfully with the support from the community. However, I still have another issue whether it is a bug or I have missed some configurations.
The issue: after successful installation & config of CWP, I both my domain and its IP can display default CWP page; they are:
http://www.mydomain.com
http://my_server_IP
However, after I uploaded an application to a folder for example:
http://www.mydomain.com/apps/
I can only access that folder via my domain for example: http://www.mydomain.com/apps/
but I cannot access it by IP: http://my_server_IP/apps/ which generates this errors:
Not Found
The requested URL /apps/ was not found on this server.
Here is my DNS record settings:
; Panel %version%
; Zone file for ns1.mydomain.com
$TTL 14400
mydomain.com. 86400 IN SOA ns1.mydomain.com. admin.mydomain.com. (
2013071600 ; serial, todays date+todays
86400 ; refresh, seconds
7200 ; retry, seconds
3600000 ; expire, seconds
86400 ) ; minimum, seconds
mydomain.com. 86400 IN NS ns1.mydomain.com.
mydomain.com. 86400 IN NS ns2.mydomain.com.
ns1 86400 IN A 167.114.xxx.xxx
ns2 86400 IN A 167.114.xxx.xxx
mydomain.com. 86400 IN A 167.114.xxx.xxx
localhost 86400 IN A 127.0.0.1
mydomain.com. 86400 IN MX 0 mydomain.com.
server IN A 167.114.xxx.xxx
www IN A 167.114.xxx.xxx
What config or settings are required so that I can access that folder via both domain and IP?
Cheers
Daro
I am a newbie to CWP panel, but I have great support from this community which is amazing.
I managed to install and configure (including DNS) CWP successfully with the support from the community. However, I still have another issue whether it is a bug or I have missed some configurations.
The issue: after successful installation & config of CWP, I both my domain and its IP can display default CWP page; they are:
http://www.mydomain.com
http://my_server_IP
However, after I uploaded an application to a folder for example:
http://www.mydomain.com/apps/
I can only access that folder via my domain for example: http://www.mydomain.com/apps/
but I cannot access it by IP: http://my_server_IP/apps/ which generates this errors:
Not Found
The requested URL /apps/ was not found on this server.
Here is my DNS record settings:
; Panel %version%
; Zone file for ns1.mydomain.com
$TTL 14400
mydomain.com. 86400 IN SOA ns1.mydomain.com. admin.mydomain.com. (
2013071600 ; serial, todays date+todays
86400 ; refresh, seconds
7200 ; retry, seconds
3600000 ; expire, seconds
86400 ) ; minimum, seconds
mydomain.com. 86400 IN NS ns1.mydomain.com.
mydomain.com. 86400 IN NS ns2.mydomain.com.
ns1 86400 IN A 167.114.xxx.xxx
ns2 86400 IN A 167.114.xxx.xxx
mydomain.com. 86400 IN A 167.114.xxx.xxx
localhost 86400 IN A 127.0.0.1
mydomain.com. 86400 IN MX 0 mydomain.com.
server IN A 167.114.xxx.xxx
www IN A 167.114.xxx.xxx
What config or settings are required so that I can access that folder via both domain and IP?
Cheers
Daro
20
CentOS-WebPanel Bugs / Re: Php errros in CWP panel
« on: July 21, 2018, 06:12:02 PM »
Thank you for all who have tried to help me especially Bullten. I found his advice on another link and was able to fix the issue with binding.
Just simply go to CWP panel --> DNS Functions --> Edit Nameservers IPs --> then press Save Changes to rebuild DNS records
Then in SSH, this command now works:
$ systemctl restart named
However, I have another issue. Because this ticket is too long, I will open another ticket.
Many thanks again for this great community.
Cheers
Daro
Just simply go to CWP panel --> DNS Functions --> Edit Nameservers IPs --> then press Save Changes to rebuild DNS records
Then in SSH, this command now works:
$ systemctl restart named
However, I have another issue. Because this ticket is too long, I will open another ticket.
Many thanks again for this great community.
Cheers
Daro
21
CentOS-WebPanel Bugs / Re: Php errros in CWP panel
« on: July 20, 2018, 08:04:46 AM »
Thanks. I mean what is the equivalent to
service named restart (that is for CentOs 6)
on CentOs 7?
service named restart (that is for CentOs 6)
on CentOs 7?
22
CentOS-WebPanel Bugs / Re: Php errros in CWP panel
« on: July 19, 2018, 11:46:02 AM »
Thanks.
What is the equivalent to:
service named restart
What is the equivalent to:
service named restart
23
CentOS-WebPanel Bugs / Re: Php errros in CWP panel
« on: July 19, 2018, 09:56:23 AM »
Thanks, studio4host.
Bullen has fixed it. He may put his guides here soon to benefit everyone.
Cheers
Bullen has fixed it. He may put his guides here soon to benefit everyone.
Cheers
24
CentOS-WebPanel Bugs / Re: Php errros in CWP panel
« on: July 18, 2018, 05:29:33 PM »
Update: I have deleted a user I created in CWP panel to remove DNS record. And created it again to rebuild DNS records.
The issue is still the same; binding does not work.
Or I can give you SSH credentials to have a look? Do you have an email address?
Cheers
The issue is still the same; binding does not work.
Or I can give you SSH credentials to have a look? Do you have an email address?
Cheers
25
CentOS-WebPanel Bugs / Re: Php errros in CWP panel
« on: July 18, 2018, 05:20:15 PM »
Hi,
Can you give me instruction on how to rebuild zone?
Cheers
Can you give me instruction on how to rebuild zone?
Cheers
26
CentOS-WebPanel Bugs / Re: Php errros in CWP panel
« on: July 18, 2018, 01:04:55 PM »
thanks for your advice.
I have changed to the followings:
; Panel %version%
; Zone file for ns1.baiagmumr5g.eu
$TTL 14400
ns1.baiagmumr5g.eu. 86400 IN SOA ns1.baiagmumr5g.eu. admin.baiagmumr5g.eu. (
2013071600 ;serial, todays date+todays
86400 ;refresh, seconds
7200 ;retry, seconds
3600000 ;expire, seconds
86400 ;minimum, seconds
)
baiagmumr5g.eu. 14400 IN NS ns1.baiagmumr5g.eu.
baiagmumr5g.eu. 14400 IN NS ns2.baiagmumr5g.eu.
ns1 14400 IN A 167.114.98.75
ns2 14400 IN A 167.114.98.75
baiagmumr5g.eu. 14400 IN A 167.114.98.75
localhost 14400 IN A 127.0.0.1
baiagmumr5g.eu. 14400 IN MX 0 baiagmumr5g.eu.
server IN A 167.114.98.75
www IN A 167.114.98.75
baiagmumr5g.eu. IN TXT "v=spf1 a mx ptr a:baiagmumr5g.eu ip4:167.114.98.75 ?all"
_adsp._domainkey.baiagmumr5g.eu. IN TXT "dkim=all"
_domainkey.baiagmumr5g.eu. IN TXT "o=~; r=abuse@baiagmumr5g.eu"
_dmarc.baiagmumr5g.eu. IN TXT "v=DMARC1; p=quarantine; sp=r; pct=100; aspf=r; adkim=s"
But it still does not work.
Cheers
I have changed to the followings:
; Panel %version%
; Zone file for ns1.baiagmumr5g.eu
$TTL 14400
ns1.baiagmumr5g.eu. 86400 IN SOA ns1.baiagmumr5g.eu. admin.baiagmumr5g.eu. (
2013071600 ;serial, todays date+todays
86400 ;refresh, seconds
7200 ;retry, seconds
3600000 ;expire, seconds
86400 ;minimum, seconds
)
baiagmumr5g.eu. 14400 IN NS ns1.baiagmumr5g.eu.
baiagmumr5g.eu. 14400 IN NS ns2.baiagmumr5g.eu.
ns1 14400 IN A 167.114.98.75
ns2 14400 IN A 167.114.98.75
baiagmumr5g.eu. 14400 IN A 167.114.98.75
localhost 14400 IN A 127.0.0.1
baiagmumr5g.eu. 14400 IN MX 0 baiagmumr5g.eu.
server IN A 167.114.98.75
www IN A 167.114.98.75
baiagmumr5g.eu. IN TXT "v=spf1 a mx ptr a:baiagmumr5g.eu ip4:167.114.98.75 ?all"
_adsp._domainkey.baiagmumr5g.eu. IN TXT "dkim=all"
_domainkey.baiagmumr5g.eu. IN TXT "o=~; r=abuse@baiagmumr5g.eu"
_dmarc.baiagmumr5g.eu. IN TXT "v=DMARC1; p=quarantine; sp=r; pct=100; aspf=r; adkim=s"
But it still does not work.
Cheers
27
CentOS-WebPanel Bugs / Re: Php errros in CWP panel
« on: July 18, 2018, 11:22:08 AM »
Here is the DNS record I have set in CWP panel:
$TTL 38400
@ IN SOA ns1.baiagmumr5g.eu. admin.baiagmumr5g.eu. (
20170922110026 ; serial
90M ; refresh
15M ; retry
14D ; expire
3600 ; default_ttl
)
baiagmumr5g.eu. 14400 IN NS ns1.baiagmumr5g.eu.
baiagmumr5g.eu. 14400 IN NS ns2.baiagmumr5g.eu.
ns1 14400 IN A 167.114.98.75
ns2 14400 IN A 167.114.98.75
baiagmumr5g.eu. 14400 IN A 167.114.98.75
localhost 14400 IN A 127.0.0.1
baiagmumr5g.eu. 14400 IN MX 0 baiagmumr5g.eu.
server IN A 167.114.98.75
www IN A 167.114.98.75
baiagmumr5g.eu. IN TXT "v=spf1 a mx ptr a:baiagmumr5g.eu ip4:167.114.98.75 ?all"
_adsp._domainkey.baiagmumr5g.eu. IN TXT "dkim=all"
_domainkey.baiagmumr5g.eu. IN TXT "o=~; r=abuse@baiagmumr5g.eu"
_dmarc.baiagmumr5g.eu. IN TXT "v=DMARC1; p=quarantine; sp=r; pct=100; aspf=r; adkim=s"
Can you please what is wrong with that?
Cheers
$TTL 38400
@ IN SOA ns1.baiagmumr5g.eu. admin.baiagmumr5g.eu. (
20170922110026 ; serial
90M ; refresh
15M ; retry
14D ; expire
3600 ; default_ttl
)
baiagmumr5g.eu. 14400 IN NS ns1.baiagmumr5g.eu.
baiagmumr5g.eu. 14400 IN NS ns2.baiagmumr5g.eu.
ns1 14400 IN A 167.114.98.75
ns2 14400 IN A 167.114.98.75
baiagmumr5g.eu. 14400 IN A 167.114.98.75
localhost 14400 IN A 127.0.0.1
baiagmumr5g.eu. 14400 IN MX 0 baiagmumr5g.eu.
server IN A 167.114.98.75
www IN A 167.114.98.75
baiagmumr5g.eu. IN TXT "v=spf1 a mx ptr a:baiagmumr5g.eu ip4:167.114.98.75 ?all"
_adsp._domainkey.baiagmumr5g.eu. IN TXT "dkim=all"
_domainkey.baiagmumr5g.eu. IN TXT "o=~; r=abuse@baiagmumr5g.eu"
_dmarc.baiagmumr5g.eu. IN TXT "v=DMARC1; p=quarantine; sp=r; pct=100; aspf=r; adkim=s"
Can you please what is wrong with that?
Cheers
28
CentOS-WebPanel Bugs / Re: Php errros in CWP panel
« on: July 18, 2018, 10:06:30 AM »
Here it is:
[root@vps196134 ~]# systemctl status named.service
● named.service - Berkeley Internet Name Domain (DNS)
Loaded: loaded (/usr/lib/systemd/system/named.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Wed 2018-07-18 03:02:07 EDT; 3h 3min ago
Process: 3650 ExecStop=/bin/sh -c /usr/sbin/rndc stop > /dev/null 2>&1 || /bin/kill -TERM $MAINPID (code=exited, status=0/SUCCESS)
Process: 13170 ExecReload=/bin/sh -c /usr/sbin/rndc reload > /dev/null 2>&1 || /bin/kill -HUP $MAINPID (code=exited, status=0/SUCCESS)
Process: 12029 ExecStart=/usr/sbin/named -u named -c ${NAMEDCONF} $OPTIONS (code=exited, status=0/SUCCESS)
Process: 3660 ExecStartPre=/bin/bash -c if [ ! "$DISABLE_ZONE_CHECKING" == "yes" ]; then /usr/sbin/named-checkconf -z "$NAMEDCONF"; else echo "Checking of zone files is disabled"; fi (code=exited, status=1/FAILURE)
Main PID: 12031 (code=exited, status=0/SUCCESS)
Jul 18 03:02:07 vps196134.vps.ovh.ca bash[3660]: zone ns2.baiagmumr5g.eu/IN: loaded serial 2013071600
Jul 18 03:02:07 vps196134.vps.ovh.ca bash[3660]: dns_rdata_fromtext: /var/named/baiagmumr5g.eu.db:2: near '20170922110026': out of range
Jul 18 03:02:07 vps196134.vps.ovh.ca bash[3660]: /var/named/baiagmumr5g.eu.db:36: file does not end with newline
Jul 18 03:02:07 vps196134.vps.ovh.ca bash[3660]: zone baiagmumr5g.eu/IN: loading from master file /var/named/baiagmumr5g.eu.db failed: out of range
Jul 18 03:02:07 vps196134.vps.ovh.ca bash[3660]: zone baiagmumr5g.eu/IN: not loaded due to errors.
Jul 18 03:02:07 vps196134.vps.ovh.ca bash[3660]: _default/baiagmumr5g.eu/IN: out of range
Jul 18 03:02:07 vps196134.vps.ovh.ca systemd[1]: named.service: control process exited, code=exited status=1
Jul 18 03:02:07 vps196134.vps.ovh.ca systemd[1]: Failed to start Berkeley Internet Name Domain (DNS).
Jul 18 03:02:07 vps196134.vps.ovh.ca systemd[1]: Unit named.service entered failed state.
Jul 18 03:02:07 vps196134.vps.ovh.ca systemd[1]: named.service failed.
Thanks
[root@vps196134 ~]# systemctl status named.service
● named.service - Berkeley Internet Name Domain (DNS)
Loaded: loaded (/usr/lib/systemd/system/named.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Wed 2018-07-18 03:02:07 EDT; 3h 3min ago
Process: 3650 ExecStop=/bin/sh -c /usr/sbin/rndc stop > /dev/null 2>&1 || /bin/kill -TERM $MAINPID (code=exited, status=0/SUCCESS)
Process: 13170 ExecReload=/bin/sh -c /usr/sbin/rndc reload > /dev/null 2>&1 || /bin/kill -HUP $MAINPID (code=exited, status=0/SUCCESS)
Process: 12029 ExecStart=/usr/sbin/named -u named -c ${NAMEDCONF} $OPTIONS (code=exited, status=0/SUCCESS)
Process: 3660 ExecStartPre=/bin/bash -c if [ ! "$DISABLE_ZONE_CHECKING" == "yes" ]; then /usr/sbin/named-checkconf -z "$NAMEDCONF"; else echo "Checking of zone files is disabled"; fi (code=exited, status=1/FAILURE)
Main PID: 12031 (code=exited, status=0/SUCCESS)
Jul 18 03:02:07 vps196134.vps.ovh.ca bash[3660]: zone ns2.baiagmumr5g.eu/IN: loaded serial 2013071600
Jul 18 03:02:07 vps196134.vps.ovh.ca bash[3660]: dns_rdata_fromtext: /var/named/baiagmumr5g.eu.db:2: near '20170922110026': out of range
Jul 18 03:02:07 vps196134.vps.ovh.ca bash[3660]: /var/named/baiagmumr5g.eu.db:36: file does not end with newline
Jul 18 03:02:07 vps196134.vps.ovh.ca bash[3660]: zone baiagmumr5g.eu/IN: loading from master file /var/named/baiagmumr5g.eu.db failed: out of range
Jul 18 03:02:07 vps196134.vps.ovh.ca bash[3660]: zone baiagmumr5g.eu/IN: not loaded due to errors.
Jul 18 03:02:07 vps196134.vps.ovh.ca bash[3660]: _default/baiagmumr5g.eu/IN: out of range
Jul 18 03:02:07 vps196134.vps.ovh.ca systemd[1]: named.service: control process exited, code=exited status=1
Jul 18 03:02:07 vps196134.vps.ovh.ca systemd[1]: Failed to start Berkeley Internet Name Domain (DNS).
Jul 18 03:02:07 vps196134.vps.ovh.ca systemd[1]: Unit named.service entered failed state.
Jul 18 03:02:07 vps196134.vps.ovh.ca systemd[1]: named.service failed.
Thanks
29
CentOS-WebPanel Bugs / Re: Php errros in CWP panel
« on: July 18, 2018, 07:03:04 AM »
Sorry there is a mistyped command above. Here is a correct one:
[root@vps196134 ~]# service named restart
Redirecting to /bin/systemctl restart named.service
Job for named.service failed because the control process exited with error code. See "systemctl status named.service" and "journalctl -xe" for details.
Cheers
[root@vps196134 ~]# service named restart
Redirecting to /bin/systemctl restart named.service
Job for named.service failed because the control process exited with error code. See "systemctl status named.service" and "journalctl -xe" for details.
Cheers
30
CentOS-WebPanel Bugs / Re: Php errros in CWP panel
« on: July 17, 2018, 07:58:40 PM »
a. Here are the outputs of the commands:
[root@vps196134 ~]# yum list installed | grep bind
bind.x86_64 32:9.9.4-61.el7 @base
bind-libs.x86_64 32:9.9.4-61.el7 @base
bind-libs-lite.x86_64 32:9.9.4-61.el7 @base
bind-license.noarch 32:9.9.4-61.el7 @base
bind-utils.x86_64 32:9.9.4-61.el7 @base
[root@vps196134 ~]# serivce named restart
-bash: serivce: command not found
b. And here the DNS config I did in CWP panel:
$TTL 38400
@ IN SOA ns1.mydomain.com. admin.mydomain.com. (
20170922110026 ; serial
90M ; refresh
15M ; retry
14D ; expire
3600 ; default_ttl
)
mydomain.com. 14400 IN NS ns1.mydomain.com.
mydomain.com. 14400 IN NS ns2.mydomain.com.
ns1 14400 IN A xxx.xxx.xxx.xxx
ns2 14400 IN A xxx.xxx.xxx.xxx
mydomain.com. 14400 IN A xxx.xxx.xxx.xxx
localhost 14400 IN A 127.0.0.1
mydomain.com. 14400 IN MX 0 mydomain.com.
server IN A xxx.xxx.xxx.xxx
www IN A xxx.xxx.xxx.xxx
mydomain.com. IN TXT "v=spf1 a mx ptr a:mydomain.com ip4:xxx.xxx.xxx.xxx ?all"
_adsp._domainkey.mydomain.com. IN TXT "dkim=all"
_domainkey.mydomain.com. IN TXT "o=~; r=abuse@mydomain.com"
_dmarc.mydomain.com. IN TXT "v=DMARC1; p=quarantine; sp=r; pct=100; aspf=r; adkim=s"
default._domainkey IN TXT ( "v=DKIM1; k=rsa; "
"p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCCRwGE8OCQk/skzSse3837B4/PLCtW6FfYESiyFshpKlF8bOGl7MfpKXibbTfBdur0puNmGOPhSSPxzEsnHjmYp7xHErzgYVd/Wgqp9HdyQRBfqyVJXmSbhuhjFe7zCYyrp4gZY1maDa5T6p8nIj/acuXrmgJNLOeAcbW7RjS8EQIDAQAB" ) ; ----- DKIM key default for mydomain.com
nh4rtd9f IN CNAME www.mydomain.com.
Cheers
[root@vps196134 ~]# yum list installed | grep bind
bind.x86_64 32:9.9.4-61.el7 @base
bind-libs.x86_64 32:9.9.4-61.el7 @base
bind-libs-lite.x86_64 32:9.9.4-61.el7 @base
bind-license.noarch 32:9.9.4-61.el7 @base
bind-utils.x86_64 32:9.9.4-61.el7 @base
[root@vps196134 ~]# serivce named restart
-bash: serivce: command not found
b. And here the DNS config I did in CWP panel:
$TTL 38400
@ IN SOA ns1.mydomain.com. admin.mydomain.com. (
20170922110026 ; serial
90M ; refresh
15M ; retry
14D ; expire
3600 ; default_ttl
)
mydomain.com. 14400 IN NS ns1.mydomain.com.
mydomain.com. 14400 IN NS ns2.mydomain.com.
ns1 14400 IN A xxx.xxx.xxx.xxx
ns2 14400 IN A xxx.xxx.xxx.xxx
mydomain.com. 14400 IN A xxx.xxx.xxx.xxx
localhost 14400 IN A 127.0.0.1
mydomain.com. 14400 IN MX 0 mydomain.com.
server IN A xxx.xxx.xxx.xxx
www IN A xxx.xxx.xxx.xxx
mydomain.com. IN TXT "v=spf1 a mx ptr a:mydomain.com ip4:xxx.xxx.xxx.xxx ?all"
_adsp._domainkey.mydomain.com. IN TXT "dkim=all"
_domainkey.mydomain.com. IN TXT "o=~; r=abuse@mydomain.com"
_dmarc.mydomain.com. IN TXT "v=DMARC1; p=quarantine; sp=r; pct=100; aspf=r; adkim=s"
default._domainkey IN TXT ( "v=DKIM1; k=rsa; "
"p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCCRwGE8OCQk/skzSse3837B4/PLCtW6FfYESiyFshpKlF8bOGl7MfpKXibbTfBdur0puNmGOPhSSPxzEsnHjmYp7xHErzgYVd/Wgqp9HdyQRBfqyVJXmSbhuhjFe7zCYyrp4gZY1maDa5T6p8nIj/acuXrmgJNLOeAcbW7RjS8EQIDAQAB" ) ; ----- DKIM key default for mydomain.com
nh4rtd9f IN CNAME www.mydomain.com.
Cheers
