Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
31
CentOS-WebPanel Bugs / Re: After update or script update, my conf files of vhosts al revert to default
« on: January 01, 2022, 01:02:49 PM »You may have had your sites up and running for months with a custom setup, because in no time did you have to rebuild your sites. When you do that, it changes *all* the site settings in apache, and if you made any changes there, you lose them all.
To avoid this, you should configure additional files in the 'conf.d' directories, either from apache or nginx. So when these changes take place, they won't affect the settings in apache/nginx.
If this is not possible, you should make changes to the apache or nginx templates, and apply the template to the respective site. To change the template, as it will also be overwritten by future changes, you must create new template files in their respective directories, and apply the template to the site configuration under "Webservers Domain Config".
It is correct, during all the time that I have been using CWP I have not had to rebuild the webservers, and yes, I am aware that, when I rebuild, the custom changes disappear, of that I am aware and aware, and as I mentioned, no I had to rebuild once I left everything well configured many months ago.
But .... for 2 or 3 days, rebuild is done automatically when anacron executes the update script, something that did not happen before, and it happens from the problem with the suspended pages ...
Indeed, creating a template, as indicated in the link that I put in my previous post (copy one with another name and customize it as desired) and then rebuild by selecting that new template, will solve the issue that now, all the nights, the automatic rebuild, which there was not before, did not affect my changes.
But what "worries" me is that one day a new change to the templates (in my case apache) will enter and since I am using a custom one, I may not be aware of this possible new change.
Be that as it may, I understand the people who comment on it, this did not happen before, for months, years and so on, now, every day the daily automatic script rebuilds and we lose all the changes made.
Greetings and happy new year.
32
CentOS-WebPanel Bugs / Re: BUG**ssl renew now renews ALL
« on: December 31, 2021, 09:58:32 AM »I have the same problem, one month ago, expire my auto SSL, automatic, has renew my SSL domain, but not admin services (like mail...).
My solution, delete the SSL of the domain and recreate again with select the SAN thats I need.
Yes, it works too.
Another way is to just add the missing DNS records for that domains.
The missing domains you can check too with the following command, since the last restart of your Apache server (if using Apache server):Code: [Select]# grep AH01909 /usr/local/apache/logs/error_log
I think that when it happened to me, if I had the DNS's configured, anyway, I check and I am going to wait for them to have to be renewed automatically, to see what happens.
Thanks and regards.
33
CentOS-WebPanel Bugs / Re: After update or script update, my conf files of vhosts al revert to default
« on: December 31, 2021, 09:55:19 AM »
This is something that had never happened until 2 days ago.
First, a CWP update caused a failure in the vhosts (apache, nginx ...) and then, although CPW did not update, at night it always passes the script to check for updates and / or perform the necessary actions.
From then on, my vhost files are restored by default.
As I comment, this had never happened until 2 days ago.
I had modified the vhosts (I use apache) to add my ipv6 as indicated in this thread:
http://forum.centos-webpanel.com/index.php?topic=9935.0
Now it doesn't work, if I run the cwp update script it restores my vhost to default.
The change you mean, I don't know exactly what you mean, is it possible you mean this :?
https://www.mysterydata.com/enable-ipv6-cwp-centos-webpanel/
If so, if there is an update to those template files I will not be knowledgeable and will continue to use my custom template without the new updates / changes coming in.
I am surprised by what happened because of what I said, for months, the vhosts were never restored to default, they always kept the change I made (add my ipv6).
Regards.
First, a CWP update caused a failure in the vhosts (apache, nginx ...) and then, although CPW did not update, at night it always passes the script to check for updates and / or perform the necessary actions.
From then on, my vhost files are restored by default.
As I comment, this had never happened until 2 days ago.
I had modified the vhosts (I use apache) to add my ipv6 as indicated in this thread:
http://forum.centos-webpanel.com/index.php?topic=9935.0
Now it doesn't work, if I run the cwp update script it restores my vhost to default.
The change you mean, I don't know exactly what you mean, is it possible you mean this :?
https://www.mysterydata.com/enable-ipv6-cwp-centos-webpanel/
If so, if there is an update to those template files I will not be knowledgeable and will continue to use my custom template without the new updates / changes coming in.
I am surprised by what happened because of what I said, for months, the vhosts were never restored to default, they always kept the change I made (add my ipv6).
Regards.
34
CentOS-WebPanel Bugs / Re: BUG**ssl renew now renews ALL
« on: December 30, 2021, 01:50:51 PM »
I have the same problem, one month ago, expire my auto SSL, automatic, has renew my SSL domain, but not admin services (like mail...).
My solution, delete the SSL of the domain and recreate again with select the SAN thats I need.
My solution, delete the SSL of the domain and recreate again with select the SAN thats I need.
35
CentOS-WebPanel Bugs / Re: All vconf files restored to default, also webserver conf
« on: December 30, 2021, 12:16:56 PM »36
CentOS-WebPanel Bugs / Re: Error in Conf files after update!
« on: December 30, 2021, 12:15:55 PM »
Yes, in all of my servers I have, same issue.
I created this thread with this: https://forum.centos-webpanel.com/index.php?topic=11633.0
And also view others users with same problem: https://forum.centos-webpanel.com/index.php?topic=11635.0
I created this thread with this: https://forum.centos-webpanel.com/index.php?topic=11633.0
And also view others users with same problem: https://forum.centos-webpanel.com/index.php?topic=11635.0
37
CentOS-WebPanel Bugs / After update or script update, my conf files of vhosts al revert to default
« on: December 30, 2021, 08:00:52 AM »
Since 2 days ago, I have this problem, if execute manually /scripts/update_cwp or simple, wait to anacron execute this, my conf files of my vhosts are revert to default, exact that, If I rebuilt configuration.
This cause to me the lost trafic in 2 nights, because, in my DNS (I use vpn) I have set the ipv6 and in my conf file of vhost I set ipv4 and ipv6 but the dns to my site point to ipv6.
When this update are execute, this files return to stock files and lost all changes, include, my ipv6 add configuration.
A big problem for me because I don't want point to ipv4, I want point to ipv6 like this lasts months...
This cause to me the lost trafic in 2 nights, because, in my DNS (I use vpn) I have set the ipv6 and in my conf file of vhost I set ipv4 and ipv6 but the dns to my site point to ipv6.
When this update are execute, this files return to stock files and lost all changes, include, my ipv6 add configuration.
A big problem for me because I don't want point to ipv4, I want point to ipv6 like this lasts months...
38
CentOS-WebPanel Bugs / Re: Error in Conf files after update!
« on: December 30, 2021, 07:56:11 AM »
Same problem with update_cwp daily night in apache, all my conf files of vhost are revert to default...
39
E-Mail / Re: spamassassin.service: Failed with result 'start-limit-hit'
« on: December 29, 2021, 08:04:47 PM »Thank you very much. It works for me! 💐Sorry for the delay in answering.
The email notification went to the spam folder ...
Glad that worked for you and was helpful, remember, the spamassasin local.cf is not set in / usr / share / spamassassin.
It must be in another route, in this way, doing the aforementioned test of sending an email with the indicated subject, it goes to the spam folder and from there, the ones that it identifies as spam are renamed.
40
Updates / Re: After the update of today (Dec 21) Apache don't find my index files
« on: December 29, 2021, 07:58:34 PM »
Hello.
I think it was a bug from one of the last updates. This morning when I got up my servers, none of them connected to the web (they are all Apache), I went to see the vhost files and they had almost no content, luckily I had a backup of these files, I restored, rebooted and came back.
But from the failure until I realized it, about 4 hours passed.
At that time I have seen how, CWP has started to launch updates (I would say 2 or 3 in an hour) which is to be congratulated, until the last one has completely solved it.
This bug is like the ones they have had in nginx: https://forum.centos-webpanel.com/index.php?topic=11627.0
I use ipv6, and every time there is a webserver reload I have to add the ipv6 by hand, is there a way to add it too, either a template or similar?
Greetings.
I think it was a bug from one of the last updates. This morning when I got up my servers, none of them connected to the web (they are all Apache), I went to see the vhost files and they had almost no content, luckily I had a backup of these files, I restored, rebooted and came back.
But from the failure until I realized it, about 4 hours passed.
At that time I have seen how, CWP has started to launch updates (I would say 2 or 3 in an hour) which is to be congratulated, until the last one has completely solved it.
This bug is like the ones they have had in nginx: https://forum.centos-webpanel.com/index.php?topic=11627.0
I use ipv6, and every time there is a webserver reload I have to add the ipv6 by hand, is there a way to add it too, either a template or similar?
Greetings.
41
E-Mail / Re: spamassassin.service: Failed with result 'start-limit-hit'
« on: October 25, 2021, 11:39:53 PM »
First of all, sorry for the delay of about 2 months in replying. I read your answer, and I really appreciate it.
However, during this time I have been looking for information by conducting tests ... etc ... and although I could have answered before, I have chosen to answer after having carried out tests and to say forcefully, that the results are positive after a month having implemented the last change / test.
Effectively your answer / solution solves the initial problem that I expose in this thread, even so, it has always surprised me a lot that, spamassassin raises the cpu consumption to 0.90 - 1.00 on average, regardless of the fact that, no matter how much we configure spamassassin such and as the cwp wiki says, also as it supports cwp (I requested support for it) never send any mail to the spam folder ... this was very strange to me.
The answer to this increase in cpu is that perhaps, I would have many emails on my server ...
The tests I have done on 4 servers, I have 3 for testing 1 in production.
Gradually I was eliminating mails from the main test server, and the consumption was always the same ... there came a day that, I eliminated all the accounts of that server, no account, no mail, nothing, the consumption of spamassassin was still the same, I raised the server to 0.90 - 1.00 on average. Something very very high.
Too bad it didn't save the url where I got the information, I did write it down in kate (linux notepad) and I have it saved in my documents. If you have saved the url, you could say the clear terms of the explanation.
Well, the change happens by modifying / etc / sysconfig / spamassassin file:
In wiki they indicate:
The reason why, despite this, spamassassin does not filter, does not take the identified emails to the spam folder and does not rename them with *** SPAM *** as indicated in the wiki, is because it should not be configured in / usr / share /spamassassin/local.cf
Rather, it must be configured in another path.
After that, you can test by sending an email with the subject:
"XJS * C4JDBQADN1.NSBN3 * 2IDNEN * GTUBE-STANDARD-ANTI-UBE-TEST-EMAIL * C.34X" (without quotes) and it looks like the mail is put in the spam folder and renamed the subject to *** SPAM ***.
Greetings.
However, during this time I have been looking for information by conducting tests ... etc ... and although I could have answered before, I have chosen to answer after having carried out tests and to say forcefully, that the results are positive after a month having implemented the last change / test.
Effectively your answer / solution solves the initial problem that I expose in this thread, even so, it has always surprised me a lot that, spamassassin raises the cpu consumption to 0.90 - 1.00 on average, regardless of the fact that, no matter how much we configure spamassassin such and as the cwp wiki says, also as it supports cwp (I requested support for it) never send any mail to the spam folder ... this was very strange to me.
The answer to this increase in cpu is that perhaps, I would have many emails on my server ...
The tests I have done on 4 servers, I have 3 for testing 1 in production.
Gradually I was eliminating mails from the main test server, and the consumption was always the same ... there came a day that, I eliminated all the accounts of that server, no account, no mail, nothing, the consumption of spamassassin was still the same, I raised the server to 0.90 - 1.00 on average. Something very very high.
Too bad it didn't save the url where I got the information, I did write it down in kate (linux notepad) and I have it saved in my documents. If you have saved the url, you could say the clear terms of the explanation.
Well, the change happens by modifying / etc / sysconfig / spamassassin file:
In wiki they indicate:
Code: [Select]
SPAMDOPTIONS = "- d -c -m5 -u nobody -s $ {SAHOME} spamd.log" But we actually remove the "-d" from the beginning, looking like this:Code: [Select]
SPAMDOPTIONS = "-c -m5 -u nobody -s $ {SAHOME} spamd.log" If my memory does not fail me (and it is easy for it to fail) this causes spamassassin to be executed as a service (I do not remember exactly if it was a service or another ...) and now it does, spamassassin, without making the changes that you mention in your post and that I had also seen in other internet threads, it is always executed, without any crash and without load on the server, the server load is normal, if you are using apache, then whatever Apache loads or whatever, and during non-use hours, the server load is 0.00 and spamassassin is active.The reason why, despite this, spamassassin does not filter, does not take the identified emails to the spam folder and does not rename them with *** SPAM *** as indicated in the wiki, is because it should not be configured in / usr / share /spamassassin/local.cf
Rather, it must be configured in another path.
After that, you can test by sending an email with the subject:
"XJS * C4JDBQADN1.NSBN3 * 2IDNEN * GTUBE-STANDARD-ANTI-UBE-TEST-EMAIL * C.34X" (without quotes) and it looks like the mail is put in the spam folder and renamed the subject to *** SPAM ***.
Greetings.
42
E-Mail / Re: CWP Email Compromised & SPAM Filtering
« on: August 17, 2021, 10:21:26 AM »Hi DNA, put the solution here or send it as a public me on other 100 forums, anyway the people from cwp do not give you any solution how to configure correct postfix, spamassassin, any mail that enters and leaves to be scanned in time real antivirus, I have the same problem with clients, I receive a lot of unwanted emails, not to mention the mail quota, which even now has not been resolved.I know that / those problems you indicate ...
43
E-Mail / Re: sync 3 mail servers
« on: August 17, 2021, 10:20:30 AM »
In my case, I don't need the 3 servers syncro in real time.
I have a script created, the cron call this script 2 times at day, and syncro all mails.
But only one server is the "master server mail", the rsync is from this master server mail to the others 2 servers.
When access to others 2 servers are the same emails of master server mail.
I have a script created, the cron call this script 2 times at day, and syncro all mails.
But only one server is the "master server mail", the rsync is from this master server mail to the others 2 servers.
When access to others 2 servers are the same emails of master server mail.
44
E-Mail / Re: spamassassin.service: Failed with result 'start-limit-hit'
« on: August 16, 2021, 06:15:24 PM »
Any info about this?
I search a lot for google but...lot info, any concret about fixed this issue....
Regards.
I search a lot for google but...lot info, any concret about fixed this issue....
Regards.
45
E-Mail / spamassassin.service: Failed with result 'start-limit-hit'
« on: August 01, 2021, 08:46:35 PM »
Hello,
I put this post here, mail section, because although it is from spamassassin, it is the most suitable section that I see.
I have this problem, for a long time, spamassassin only lasts a few hours, the most I have managed to work has been 3 or 4 days in a row.
At the moment that, for whatever reason, it stops working (according to the line of the subject and log that I will put below) I can no longer solve it in any way, if I do a restart, it takes just a few minutes.
I have done many tests, even another vps that I have without use, I have transferred the entirety of this server, so they have exactly the same accounts, same mails ... everything is the same, even both vps are the same (same cores, same ram) except that one is intel, the other epyc (it is the one that fails).
I have even transferred this account to another vps that has 2 accounts and added the server epyc (which are 2 accounts) in total 4, and it does not fail either.
To understand us:
Server1: Epyc (two accounts, is the one that gives me the problems).
Server2: Intel: Not used, I have transferred the whole of server1 and it does not fail.
Server3: Intel: With use of 2 accounts, I have added by transfer the 2 accounts of server1, and this does not fail.
So that they always have the same mails, through rsync I transfer the mails from server1 to server2 and server3.
I have followed the spamassassin installation wiki, also in rebuild from cwp, with Amavis / Clamd and without it.
Always, sooner or later, it ends up failing.
The other difference between server1 and server2 and server3 is that server1 is with php-fpm, the other two are not.
As I comment, same cores, same ram, same s.o. all equal.
I doubt that the cause is because it is an Epyc instead of an Intel ...
This is the log (I put 3 logs).
If when this happens, I run this statement:
Any ideas?
Thanks in advance.
I put this post here, mail section, because although it is from spamassassin, it is the most suitable section that I see.
I have this problem, for a long time, spamassassin only lasts a few hours, the most I have managed to work has been 3 or 4 days in a row.
At the moment that, for whatever reason, it stops working (according to the line of the subject and log that I will put below) I can no longer solve it in any way, if I do a restart, it takes just a few minutes.
I have done many tests, even another vps that I have without use, I have transferred the entirety of this server, so they have exactly the same accounts, same mails ... everything is the same, even both vps are the same (same cores, same ram) except that one is intel, the other epyc (it is the one that fails).
I have even transferred this account to another vps that has 2 accounts and added the server epyc (which are 2 accounts) in total 4, and it does not fail either.
To understand us:
Server1: Epyc (two accounts, is the one that gives me the problems).
Server2: Intel: Not used, I have transferred the whole of server1 and it does not fail.
Server3: Intel: With use of 2 accounts, I have added by transfer the 2 accounts of server1, and this does not fail.
So that they always have the same mails, through rsync I transfer the mails from server1 to server2 and server3.
I have followed the spamassassin installation wiki, also in rebuild from cwp, with Amavis / Clamd and without it.
Always, sooner or later, it ends up failing.
The other difference between server1 and server2 and server3 is that server1 is with php-fpm, the other two are not.
As I comment, same cores, same ram, same s.o. all equal.
I doubt that the cause is because it is an Epyc instead of an Intel ...
This is the log (I put 3 logs).
Code: [Select]
● spamassassin.service - Spamassassin daemon
Loaded: loaded (/usr/lib/systemd/system/spamassassin.service; enabled; vendor preset: disabled)
Active: failed (Result: start-limit-hit) since Thu 2021-07-15 14:00:49 CEST; 6h ago
Process: 390132 ExecStart=/usr/bin/spamd $SPAMDOPTIONS (code=exited, status=0/SUCCESS)
Main PID: 390132 (code=exited, status=0/SUCCESS)
Jul 15 14:00:49 server.mydomain.com systemd[1]: spamassassin.service: Succeeded.
Jul 15 14:00:49 server.mydomain.com systemd[1]: spamassassin.service: Service RestartSec=100ms expired, scheduling restart.
Jul 15 14:00:49 server.mydomain.com systemd[1]: spamassassin.service: Scheduled restart job, restart counter is at 9444.
Jul 15 14:00:49 server.mydomain.com systemd[1]: Stopped Spamassassin daemon.
Jul 15 14:00:49 server.mydomain.com systemd[1]: spamassassin.service: Start request repeated too quickly.
Jul 15 14:00:49 server.mydomain.com systemd[1]: spamassassin.service: Failed with result 'start-limit-hit'.
Jul 15 14:00:49 server.mydomain.com systemd[1]: Failed to start Spamassassin daemon.
● spamassassin.service - Spamassassin daemon
Loaded: loaded (/usr/lib/systemd/system/spamassassin.service; enabled; vendor preset: disabled)
Active: failed (Result: start-limit-hit) since Sun 2021-08-01 09:02:50 CEST; 1min 33s ago
Process: 3493 ExecStart=/usr/bin/spamd $SPAMDOPTIONS (code=exited, status=0/SUCCESS)
Main PID: 3493 (code=exited, status=0/SUCCESS)
Aug 01 09:02:50 server.mydomain.com systemd[1]: spamassassin.service: Service RestartSec=100ms expired, scheduling restart.
Aug 01 09:02:50 server.mydomain.com systemd[1]: spamassassin.service: Scheduled restart job, restart counter is at 115.
Aug 01 09:02:50 server.mydomain.com systemd[1]: Stopped Spamassassin daemon.
Aug 01 09:02:50 server.mydomain.com systemd[1]: spamassassin.service: Start request repeated too quickly.
Aug 01 09:02:50 server.mydomain.com systemd[1]: spamassassin.service: Failed with result 'start-limit-hit'.
Aug 01 09:02:50 server.mydomain.com systemd[1]: Failed to start Spamassassin daemon.
● spamassassin.service - Spamassassin daemon
Loaded: loaded (/usr/lib/systemd/system/spamassassin.service; enabled; vendor preset: disabled)
Active: failed (Result: start-limit-hit) since Sun 2021-08-01 20:26:21 CEST; 2h 6min ago
Process: 57453 ExecStart=/usr/bin/spamd $SPAMDOPTIONS (code=exited, status=0/SUCCESS)
Main PID: 57453 (code=exited, status=0/SUCCESS)
Aug 01 20:26:21 server.mydomain.com systemd[1]: spamassassin.service: Service RestartSec=100ms expired, scheduling restart.
Aug 01 20:26:21 server.mydomain.com systemd[1]: spamassassin.service: Scheduled restart job, restart counter is at 5916.
Aug 01 20:26:21 server.mydomain.com systemd[1]: Stopped Spamassassin daemon.
Aug 01 20:26:21 server.mydomain.com systemd[1]: spamassassin.service: Start request repeated too quickly.
Aug 01 20:26:21 server.mydomain.com systemd[1]: spamassassin.service: Failed with result 'start-limit-hit'.
Aug 01 20:26:21 server.mydomain.com systemd[1]: Failed to start Spamassassin daemon.If when this happens, I run this statement:
Code: [Select]
systemctl reset-failed spamassassinWorks again for a few hours, then crashes again.Any ideas?
Thanks in advance.
