Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
CentOS-WebPanel GUI / Re: Help needed - Per Domain HTTPS / HTTP selection
« on: November 26, 2019, 10:05:54 AM »
Hi,
For apache server you must add a .htaccess rule manually for that specific domain which will force redirect to https For nginx only servers you will need to modify the domain config file and add a https force redirect rule.
For apache server you must add a .htaccess rule manually for that specific domain which will force redirect to https For nginx only servers you will need to modify the domain config file and add a https force redirect rule.
2
Information / Re: whare is apache configuration ?
« on: November 26, 2019, 09:39:38 AM »
Hi,
If you cannot find these values then you must add them manually into /usr/local/apache/conf.d/ or /usr/local/apache/conf.d/limits.conf
Perhaps you should check first why your server is reaching max limits.
If you cannot find these values then you must add them manually into /usr/local/apache/conf.d/ or /usr/local/apache/conf.d/limits.conf
Perhaps you should check first why your server is reaching max limits.
3
FTP / Re: Ftp user login+ hostname problem
« on: September 12, 2019, 09:36:24 AM »
Hi,
I can confirm the same problem on my CWP servers. When you create a FTP virtual user from CWP user interface, FTP account is created with incorrect format example@domain.com@domain.com
I can confirm the same problem on my CWP servers. When you create a FTP virtual user from CWP user interface, FTP account is created with incorrect format example@domain.com@domain.com
4
FTP / Re: can not login FTP
« on: September 12, 2019, 08:58:12 AM »
Hi,
For those who encounter such issues, you need to open FTP port range for passive connections from the CSF config file. Find your FTP config file, for example pure-ftpd will be /etc/pure-ftpd/pure-ftpd.conf, and search for PassivePortRange. Set it to something like this:
PassivePortRange 30000 30050
Restart the ftp server. Then go to /etc/csf/csf.conf and find 'Allow incoming TCP ports'. Add 30000:30050 at the end of the TCP_IN line, save the changes and restart csf. Now the connection should work.
For those who encounter such issues, you need to open FTP port range for passive connections from the CSF config file. Find your FTP config file, for example pure-ftpd will be /etc/pure-ftpd/pure-ftpd.conf, and search for PassivePortRange. Set it to something like this:
PassivePortRange 30000 30050
Restart the ftp server. Then go to /etc/csf/csf.conf and find 'Allow incoming TCP ports'. Add 30000:30050 at the end of the TCP_IN line, save the changes and restart csf. Now the connection should work.
5
CentOS-WebPanel GUI / Re: Module Command Error
« on: August 29, 2019, 08:30:07 AM »
I was wrong, capital letters for passwords is permitted.
To tell WHMCS to generate random passwords without special characters, go to Setup>General settings>Security and check 'Generate passwords containing a combination of letters and numbers only' This way you don't need to modify the password manually while creating new users and the module will not complain about special characters.
To tell WHMCS to generate random passwords without special characters, go to Setup>General settings>Security and check 'Generate passwords containing a combination of letters and numbers only' This way you don't need to modify the password manually while creating new users and the module will not complain about special characters.
6
CentOS-WebPanel GUI / Re: Module Command Error
« on: August 27, 2019, 12:02:49 PM »
Apparently you can't use special characters or capital letters in the 'Password' field which is not a smart idea from the security perspective. I will point the devs. to this topic. Hopefully they will fix this.
7
CentOS-WebPanel GUI / Re: Module Command Error
« on: August 27, 2019, 10:47:06 AM »
It doesn't have empty spaces or special characters. That is why I'm asking for help.
8
CentOS-WebPanel GUI / Re: Module Command Error
« on: August 27, 2019, 08:52:31 AM »
Thank you for your response. As displayed in the screenshot, the domain name and the username format is fine.
9
CentOS-WebPanel GUI / Module Command Error
« on: August 26, 2019, 08:00:17 PM »
Hi All,
Basically I installed the WHMCS module by following this guide
https://www.youtube.com/watch?time_continue=2&v=96dizYdi6WY
The problem is when I try to create an account on the remote CWP server from WHMCS, it will throw the following error
Here is a screenshot https://imgur.com/ox7G6AN
Has anyone had such problems and can they help? Where the error log is located which can show what is happening? /usr/local/cwpsrv/logs/error_log doesn't show anything related to this issue. Thanks in advance.
Basically I installed the WHMCS module by following this guide
https://www.youtube.com/watch?time_continue=2&v=96dizYdi6WY
The problem is when I try to create an account on the remote CWP server from WHMCS, it will throw the following error
Code: [Select]
Check All Fields (only lower caps are allowed and no special characters or empty spaces...Here is a screenshot https://imgur.com/ox7G6AN
Has anyone had such problems and can they help? Where the error log is located which can show what is happening? /usr/local/cwpsrv/logs/error_log doesn't show anything related to this issue. Thanks in advance.
10
Apache / 70007 The timeout specified has expired
« on: January 22, 2019, 04:09:59 PM »
Hi,
In case someone will face with this error:
[proxy_fcgi:error] (70007)The timeout specified has expired: [client 123.45.67.89:57527] AH01075: Error dispatching request to : (polling), referer: https://yuordomain.com/someURL
Create a file like this /usr/local/apache/conf/userdata/user/yourdomain.com/proxy.conf
Replace 'user/yourdomain.com' with your virtualhost user and domain name
Add this line:
ProxyTimeout 1800
restart apache
service httpd restart
Good luck.
In case someone will face with this error:
[proxy_fcgi:error] (70007)The timeout specified has expired: [client 123.45.67.89:57527] AH01075: Error dispatching request to : (polling), referer: https://yuordomain.com/someURL
Create a file like this /usr/local/apache/conf/userdata/user/yourdomain.com/proxy.conf
Replace 'user/yourdomain.com' with your virtualhost user and domain name
Add this line:
ProxyTimeout 1800
restart apache
service httpd restart
Good luck.
11
Mod_Security / Re: How to disable a rule by ID
« on: January 22, 2019, 11:51:32 AM »
Hi,
Go to Mod Security> Accounts> Edit rules> Edit file> add the output below:
<IfModule mod_security2.c>
SecRuleEngine On
SecRuleRemoveById 211190
</IfModule>
Replace the mod_sec ID with the one you want to exclude, in your case it is 211190. Then restart/reload the apache server.
Go to Mod Security> Accounts> Edit rules> Edit file> add the output below:
<IfModule mod_security2.c>
SecRuleEngine On
SecRuleRemoveById 211190
</IfModule>
Replace the mod_sec ID with the one you want to exclude, in your case it is 211190. Then restart/reload the apache server.
12
CentOS-WebPanel Bugs / Re: Error Transfer Account CWP to CWP (centos7)
« on: December 26, 2018, 10:53:58 AM »
Hi Guys,
Please fix this problem ASAP. We cannot transfer the accounts.
Please fix this problem ASAP. We cannot transfer the accounts.
13
Postfix / Re: Problems Postfix
« on: December 04, 2018, 10:21:45 AM »
Hi,
Basically, the error is saying that the CA is unknown and the connection is dropped. If you will look into your postfix config file /etc/postfix/main.cf, you will notice something like this:
smtpd_tls_key_file = /etc/pki/tls/private/srv.servername.com.key
smtpd_tls_cert_file = /etc/pki/tls/certs/srv.servername.com.crt
smtpd_tls_CAfile = /etc/pki/tls/certs/ca-bundle.crt
smtp_tls_CAfile = /etc/pki/tls/certs/ca-bundle.crt
What you need to do is it so change the CA file path to the correct one. In my case, it was:
smtpd_tls_CAfile = /etc/pki/tls/certs/srv.servername.com.bundle
smtp_tls_CAfile = /etc/pki/tls/certs/srv.servername.com.bundle
This happened when I changed the server hostname and installed a Let's Encrypt SSL for it, from the CWP interface. For some reason, it did not change the CA file path automatically. I hope this will help someone facing the same issues.
Basically, the error is saying that the CA is unknown and the connection is dropped. If you will look into your postfix config file /etc/postfix/main.cf, you will notice something like this:
smtpd_tls_key_file = /etc/pki/tls/private/srv.servername.com.key
smtpd_tls_cert_file = /etc/pki/tls/certs/srv.servername.com.crt
smtpd_tls_CAfile = /etc/pki/tls/certs/ca-bundle.crt
smtp_tls_CAfile = /etc/pki/tls/certs/ca-bundle.crt
What you need to do is it so change the CA file path to the correct one. In my case, it was:
smtpd_tls_CAfile = /etc/pki/tls/certs/srv.servername.com.bundle
smtp_tls_CAfile = /etc/pki/tls/certs/srv.servername.com.bundle
This happened when I changed the server hostname and installed a Let's Encrypt SSL for it, from the CWP interface. For some reason, it did not change the CA file path automatically. I hope this will help someone facing the same issues.
14
CentOS-WebPanel Bugs / Re: BUG on PHP Builder
« on: September 27, 2018, 03:33:47 PM »
Hi,
This problem is still not fixed. PHP build still throwing the same error when ionCube is enabled among with HTTPS Error 404 - Not Found for repository
https://ewr.edge.kernel.org/fedora-buffet/epel/7/x86_64/repodata/f2cb9d125452386dac4a1f3f40022d1d9771ce6342de0ba458510d270e94d0c4-updateinfo.xml.bz2: [Errno 14] HTTPS Error 404 - Not Found
Trying other mirror.
To address this issue please refer to the below wiki article
https://wiki.centos.org/yum-errors
If above article doesn't help to resolve this issue please use https://bugs.centos.org/.
https://mirror.vcu.edu/pub/gnu%2Blinux/epel/7/x86_64/repodata/6772c88ca398a0090eec24bb3ee26c34490d0ac5816d1a594fb192fa4792c262-primary.xml.gz: [Errno 14] HTTPS Error 404 - Not Found
Trying other mirror.
On a fresh installed OS.
This problem is still not fixed. PHP build still throwing the same error when ionCube is enabled among with HTTPS Error 404 - Not Found for repository
https://ewr.edge.kernel.org/fedora-buffet/epel/7/x86_64/repodata/f2cb9d125452386dac4a1f3f40022d1d9771ce6342de0ba458510d270e94d0c4-updateinfo.xml.bz2: [Errno 14] HTTPS Error 404 - Not Found
Trying other mirror.
To address this issue please refer to the below wiki article
https://wiki.centos.org/yum-errors
If above article doesn't help to resolve this issue please use https://bugs.centos.org/.
https://mirror.vcu.edu/pub/gnu%2Blinux/epel/7/x86_64/repodata/6772c88ca398a0090eec24bb3ee26c34490d0ac5816d1a594fb192fa4792c262-primary.xml.gz: [Errno 14] HTTPS Error 404 - Not Found
Trying other mirror.
On a fresh installed OS.
Pages: [1]
