Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
1
SSL / ssl for ftp
« on: May 17, 2021, 11:38:41 AM »
hello,
ssl for my domain is showing 56 days left in cwp pro and have valid SSL installed for all services i.e. mail, webmail, ftp, cpanel , but when i conntect to ftp via ftp client (filezilla) , it shows certificate expired. see the below snapshot for reference. kindly suggest me how to fix this ssl expiry message issue.
ssl for my domain is showing 56 days left in cwp pro and have valid SSL installed for all services i.e. mail, webmail, ftp, cpanel , but when i conntect to ftp via ftp client (filezilla) , it shows certificate expired. see the below snapshot for reference. kindly suggest me how to fix this ssl expiry message issue.
2
Mod_Security / modsecurity not updated in cwp pro
« on: August 06, 2020, 12:30:02 AM »
hello,
current version installed for modsecurity in cwp pro is : 1.230 but the latest version released for ModSecurity is 3.0.4 (Jan 13, 2020).
how to get it updated in cwp pro?
Regards,
ZeejDeej
current version installed for modsecurity in cwp pro is : 1.230 but the latest version released for ModSecurity is 3.0.4 (Jan 13, 2020).
how to get it updated in cwp pro?
Regards,
ZeejDeej
3
Softaculous / magento issue after installation
« on: August 03, 2020, 10:38:33 AM »
hello,
i have successfully installed magento via softaculous but its not showing up css/images/page format correctly. can anyone suggest me how to fix this issue. i am using cwp pro and running nginx/varnish/apache as web server configuration.
https://test.esoftware.pk/
https://test.esoftware.pk/admin
admin panel also showing text only
kindly suggest how to configure magento 2 on cwp pro
Regards,
ZeejDeej
i have successfully installed magento via softaculous but its not showing up css/images/page format correctly. can anyone suggest me how to fix this issue. i am using cwp pro and running nginx/varnish/apache as web server configuration.
https://test.esoftware.pk/
https://test.esoftware.pk/admin
admin panel also showing text only
kindly suggest how to configure magento 2 on cwp pro
Regards,
ZeejDeej
4
DNS / DNS server failed to load
« on: June 16, 2020, 12:35:33 AM »
hello,
i am having issues with dns server , its giving following error while loading. kindly suggest how to fix these errors.
there are two main errors i see due to which dns server is not loading the zone file.
/var/named/esoftware.pk.db:36: file does not end with newline
what does this means? and how to end with newline?
zone esoftware.pk/IN: has no NS records
when i try to add NS record in dns zone file it gives error , (there is some error with configuration, please check and update)
also i am not able to add A record for ns1 and ns2 to point to my server IP
-- Unit named.service has begun starting up.
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone localhost.localdomain/IN: loaded serial 0
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone localhost/IN: loaded serial 0
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN: loaded serial 0
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone 1.0.0.127.in-addr.arpa/IN: loaded serial 0
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone 0.in-addr.arpa/IN: loaded serial 0
Jun 15 15:59:16 server.esoftware.pk bash[26011]: /var/named/esoftware.pk.db:36: file does not end with newline
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone esoftware.pk/IN: has no NS records
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone esoftware.pk/IN: not loaded due to errors.
Jun 15 15:59:16 server.esoftware.pk bash[26011]: _default/esoftware.pk/IN: bad zone
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone ns1.esoftware.pk/IN: loaded serial 2020061400
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone ns2.esoftware.pk/IN: loaded serial 2020061400
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone ns1.test-domain.com/IN: loaded serial 2013071600
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone ns2.test-domain.com/IN: loaded serial 2013071600
Jun 15 15:59:16 server.esoftware.pk systemd[1]: named.service: control process exited, code=exited status=1
Jun 15 15:59:16 server.esoftware.pk systemd[1]: Failed to start Berkeley Internet Name Domain (DNS).
-- Subject: Unit named.service has failed
i am having issues with dns server , its giving following error while loading. kindly suggest how to fix these errors.
there are two main errors i see due to which dns server is not loading the zone file.
/var/named/esoftware.pk.db:36: file does not end with newline
what does this means? and how to end with newline?
zone esoftware.pk/IN: has no NS records
when i try to add NS record in dns zone file it gives error , (there is some error with configuration, please check and update)
also i am not able to add A record for ns1 and ns2 to point to my server IP
-- Unit named.service has begun starting up.
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone localhost.localdomain/IN: loaded serial 0
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone localhost/IN: loaded serial 0
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN: loaded serial 0
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone 1.0.0.127.in-addr.arpa/IN: loaded serial 0
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone 0.in-addr.arpa/IN: loaded serial 0
Jun 15 15:59:16 server.esoftware.pk bash[26011]: /var/named/esoftware.pk.db:36: file does not end with newline
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone esoftware.pk/IN: has no NS records
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone esoftware.pk/IN: not loaded due to errors.
Jun 15 15:59:16 server.esoftware.pk bash[26011]: _default/esoftware.pk/IN: bad zone
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone ns1.esoftware.pk/IN: loaded serial 2020061400
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone ns2.esoftware.pk/IN: loaded serial 2020061400
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone ns1.test-domain.com/IN: loaded serial 2013071600
Jun 15 15:59:16 server.esoftware.pk bash[26011]: zone ns2.test-domain.com/IN: loaded serial 2013071600
Jun 15 15:59:16 server.esoftware.pk systemd[1]: named.service: control process exited, code=exited status=1
Jun 15 15:59:16 server.esoftware.pk systemd[1]: Failed to start Berkeley Internet Name Domain (DNS).
-- Subject: Unit named.service has failed
5
CentOS Configuration / monit alert -- Upload bytes exceeded public
« on: May 26, 2020, 11:13:24 AM »
what does this alert means? any idea
Upload bytes exceeded Service public
Date: Mon, 25 May 2020 11:08:23
Action: alert
Host: server.baringslaw.group
Description: total upload 1.0 GB matches limit [upload rate > 1 GB in last 1 hour]
Your faithful employee,
Monit
Upload bytes exceeded Service public
Date: Mon, 25 May 2020 11:08:23
Action: alert
Host: server.baringslaw.group
Description: total upload 1.0 GB matches limit [upload rate > 1 GB in last 1 hour]
Your faithful employee,
Monit
6
CentOS-WebPanel Bugs / Can't open PID file
« on: May 26, 2020, 10:46:04 AM »
hello,
this Can't open PID file issue keep on appearing for multiple services and when i check the file exists with a valid PID inside. this issue goes away after service restart.
why this issue keep on appearing again and again for multiple services in cwp pro?
see the below example for cwp-phpfpm service .
[root@server ~]# service cwp-phpfpm status -l
Redirecting to /bin/systemctl status -l cwp-phpfpm.service
● cwp-phpfpm.service - The PHP FastCGI Process Manager
Loaded: loaded (/usr/lib/systemd/system/cwp-phpfpm.service; enabled; vendor preset: disabled)
Active: active (running) since Tue 2020-05-26 03:55:39 CEST; 8h ago
Process: 23042 ExecReload=/bin/kill -USR2 $MAINPID (code=exited, status=0/SUCCESS)
Main PID: 23011 (php-fpm)
CGroup: /system.slice/cwp-phpfpm.service
├─ 9895 php-fpm: pool login
├─ 9896 php-fpm: pool cwpsvc
└─23011 php-fpm: master process (/usr/local/cwp/php71/etc/php-fpm.conf)
May 26 03:55:39 server.baringslaw.group systemd[1]: Started The PHP FastCGI Process Manager.
May 26 03:55:39 server.baringslaw.group php-fpm[23011]: [26-May-2020 03:55:39] WARNING: Nothing matches the include pattern '/usr/local/cwp/php71/etc/php-fpm.d/users/*.conf' from /usr/local/cwp/php71/etc/php-fpm.d/users.conf at line 1.
May 26 03:55:39 server.baringslaw.group systemd[1]: Reloading The PHP FastCGI Process Manager.
May 26 03:55:39 server.baringslaw.group systemd[1]: Can't open PID file /usr/local/cwp/php71/var/run/cwp-php-fpm.pid (yet?) after reload: No such file or directory
May 26 03:55:39 server.baringslaw.group systemd[1]: Reloaded The PHP FastCGI Process Manager.
this Can't open PID file issue keep on appearing for multiple services and when i check the file exists with a valid PID inside. this issue goes away after service restart.
why this issue keep on appearing again and again for multiple services in cwp pro?
see the below example for cwp-phpfpm service .
[root@server ~]# service cwp-phpfpm status -l
Redirecting to /bin/systemctl status -l cwp-phpfpm.service
● cwp-phpfpm.service - The PHP FastCGI Process Manager
Loaded: loaded (/usr/lib/systemd/system/cwp-phpfpm.service; enabled; vendor preset: disabled)
Active: active (running) since Tue 2020-05-26 03:55:39 CEST; 8h ago
Process: 23042 ExecReload=/bin/kill -USR2 $MAINPID (code=exited, status=0/SUCCESS)
Main PID: 23011 (php-fpm)
CGroup: /system.slice/cwp-phpfpm.service
├─ 9895 php-fpm: pool login
├─ 9896 php-fpm: pool cwpsvc
└─23011 php-fpm: master process (/usr/local/cwp/php71/etc/php-fpm.conf)
May 26 03:55:39 server.baringslaw.group systemd[1]: Started The PHP FastCGI Process Manager.
May 26 03:55:39 server.baringslaw.group php-fpm[23011]: [26-May-2020 03:55:39] WARNING: Nothing matches the include pattern '/usr/local/cwp/php71/etc/php-fpm.d/users/*.conf' from /usr/local/cwp/php71/etc/php-fpm.d/users.conf at line 1.
May 26 03:55:39 server.baringslaw.group systemd[1]: Reloading The PHP FastCGI Process Manager.
May 26 03:55:39 server.baringslaw.group systemd[1]: Can't open PID file /usr/local/cwp/php71/var/run/cwp-php-fpm.pid (yet?) after reload: No such file or directory
May 26 03:55:39 server.baringslaw.group systemd[1]: Reloaded The PHP FastCGI Process Manager.
7
CentOS-WebPanel Bugs / monit is trying to send emails to root@localhost
« on: May 26, 2020, 10:40:50 AM »
hello,
monit is trying to send email alerts to root@localhost and all these emails are being rejected due to the following reason:
May 26 12:26:17 server.baringslaw.group postfix/smtpd[8636]: NOQUEUE: reject: RCPT from server.baringslaw.group[::1]: 504 5.5.2
<root@localhost>: Recipient address rejected: need fully-qualified address; from=<monit@server.baringslaw.group> to=<root@localhost>
proto=ESMTP helo=<server.baringslaw.group>
message reject detail
---------------------
RCPT
Recipient address rejected: need fully-qualified address (total: 289)
289 root@localhost
how to change the monit reporting email address ?
Regards,
Zeeshan Javed
monit is trying to send email alerts to root@localhost and all these emails are being rejected due to the following reason:
May 26 12:26:17 server.baringslaw.group postfix/smtpd[8636]: NOQUEUE: reject: RCPT from server.baringslaw.group[::1]: 504 5.5.2
<root@localhost>: Recipient address rejected: need fully-qualified address; from=<monit@server.baringslaw.group> to=<root@localhost>
proto=ESMTP helo=<server.baringslaw.group>
message reject detail
---------------------
RCPT
Recipient address rejected: need fully-qualified address (total: 289)
289 root@localhost
how to change the monit reporting email address ?
Regards,
Zeeshan Javed
8
Postfix / warning: database /etc/postfix/vmail_ssl.map.db is older than source file /etc/p
« on: May 26, 2020, 08:18:08 AM »
hello,
postfix is giving this warning : warning: database /etc/postfix/vmail_ssl.map.db is older than source file /etc/postfix/vmail_ssl.map
i tried to run the below suggested commands from cwp forum thread : http://forum.centos-webpanel.com/postfix/i-can-send-email-but-i-can%27t-receive/
$ postmap -F hash:/etc/postfix/vmail_ssl.map
$ service postfix reload
but no luck , the warning is still appearing .
can someone suggest me a workaround for this ?
Regards,
Zeeshan Javed
postfix is giving this warning : warning: database /etc/postfix/vmail_ssl.map.db is older than source file /etc/postfix/vmail_ssl.map
i tried to run the below suggested commands from cwp forum thread : http://forum.centos-webpanel.com/postfix/i-can-send-email-but-i-can%27t-receive/
$ postmap -F hash:/etc/postfix/vmail_ssl.map
$ service postfix reload
but no luck , the warning is still appearing .
can someone suggest me a workaround for this ?
Regards,
Zeeshan Javed
9
E-Mail / emails to hostmail and outlook always goes to spam
« on: May 17, 2020, 08:34:28 AM »
hello,
i have configured SPF, DKIM, DMARC records for my domain and rDns is matching the SMTP banner. my email spam test score is 10/10 still all emails to hotmail and outlook going to spam folder. i have even contacted hotmail team to unblock my IP as it has clean reputation and not reported in any of the ban/spam list but they always reply your domain/IP is doesn't qualify for mitigation.
see the attached snaps for reference. kindly suggest what else i can do to fix this issue.
i have configured SPF, DKIM, DMARC records for my domain and rDns is matching the SMTP banner. my email spam test score is 10/10 still all emails to hotmail and outlook going to spam folder. i have even contacted hotmail team to unblock my IP as it has clean reputation and not reported in any of the ban/spam list but they always reply your domain/IP is doesn't qualify for mitigation.
see the attached snaps for reference. kindly suggest what else i can do to fix this issue.
10
E-Mail / postfix dovecot limits
« on: May 17, 2020, 07:16:49 AM »
hello,
i want to deploy an email server which is suppose to receive 5000 email per hour max and 20000 a day in total. is postfix and dovecot can handle this much incoming email traffic smoothly by default setting with cwp pro? or do i have to fine tune some setting/parameters to optimize the mail server performance?
kindly suggest if cwp pro can be used to manage email server on large scale? how stable is it ? did someone tested it on a busy server.
Regards,
Zeeshan Javed
i want to deploy an email server which is suppose to receive 5000 email per hour max and 20000 a day in total. is postfix and dovecot can handle this much incoming email traffic smoothly by default setting with cwp pro? or do i have to fine tune some setting/parameters to optimize the mail server performance?
kindly suggest if cwp pro can be used to manage email server on large scale? how stable is it ? did someone tested it on a busy server.
Regards,
Zeeshan Javed
11
DNS / can i change main domain in cwp pro
« on: May 14, 2020, 01:29:09 AM »
hello,
can i change the main domain in my currently running live cwp pro server ? how to change it without having issues with current site and subdomains.
is there a way to smoothly change the main domain and private nameservers on my vps running cwp pro? kindly suggest the best possible solution.
Regards,
Zeeshan Javed
can i change the main domain in my currently running live cwp pro server ? how to change it without having issues with current site and subdomains.
is there a way to smoothly change the main domain and private nameservers on my vps running cwp pro? kindly suggest the best possible solution.
Regards,
Zeeshan Javed
12
DNS / SOA Test results for my domain at leafdns.com (need suggestion)
« on: May 09, 2020, 12:11:00 AM »SOA Tests
Your SOA record according to ns2.smartwebsolutions.club. is:
Field
Value
Master Nameserver:
ns1.smartwebsolutions.club.
Hostmaster E-Mail Address:
admin@smartwebsolutions.club
Serial #:
2020050689
Refresh:
3600
Retry:
7200
FAIL: This value is extremely high. A good suggestion would be between 300-3600 (5 minutes to 1 hour). This value is even higher than the refresh value which makes very little sense. This should be adjusted.
Expire:
1209600
Default TTL:
86400
FAIL: This value is a little high. The recommended values per RFC1912 are 3600-10800 (1 to 3 hours). This value is primarily used for negative caching. This is how long a dns cache will cache that a record does not exist before trying to look it up again.
Successes: 6 Tests Passed
Failures: 1 Failure
Warnings: 1 Warning
in cwp panel the recommended values are shown as :
------------------------------------------------------------
Refresh Recommended: 86400
Retry Recommended: 7200
Expire Recommended: 3600000
TTL Recommended: 172800
------------------------------------------------------------
in both the zone files i.e. : ns1.smartwebsolutions.club.db & ns2.smartwebsolutions.club.db
MNAME is set to : ns1.smartwebsolutions.club
RNAME is set to : info.centos-webpanel.com
kindly suggest of this is correct or for ns2 MNAME should be ns2.smartwebsolutions.club and what should be in RNAME for both
13
Dovecot / Can't open PID file /var/run/dovecot/master.pid (yet?) after start: No such file
« on: May 08, 2020, 10:36:52 AM »
Hello,
i am having master.pid file cant be found error as below. i have check /var/run/dovecot/master.pid exists with the following permissions. can someone suggest me why i am getting this error as the file and folder already exists with valid pid info inside.
[root@server ~]# service dovecot status -l
Redirecting to /bin/systemctl status -l dovecot.service
● dovecot.service - Dovecot IMAP/POP3 email server
Loaded: loaded (/usr/lib/systemd/system/dovecot.service; enabled; vendor preset: disabled)
Active: active (running) since Fri 2020-05-08 02:09:15 CEST; 10h ago
Docs: man:dovecot(1)
http://wiki2.dovecot.org/
Process: 29745 ExecStop=/usr/bin/doveadm stop (code=exited, status=0/SUCCESS)
Process: 29797 ExecStart=/usr/sbin/dovecot (code=exited, status=0/SUCCESS)
Process: 29794 ExecStartPre=/usr/sbin/portrelease dovecot (code=exited, status=0/SUCCESS)
Process: 29787 ExecStartPre=/usr/libexec/dovecot/prestartscript (code=exited, status=0/SUCCESS)
Main PID: 29801 (dovecot)
CGroup: /system.slice/dovecot.service
├─19670 dovecot/ssl-params
├─29801 /usr/sbin/dovecot
├─29802 dovecot/anvil
├─29803 dovecot/log
└─29805 dovecot/config
May 08 02:09:14 server.smartwebsolutions.club systemd[1]: Starting Dovecot IMAP/POP3 email server...
May 08 02:09:15 server.smartwebsolutions.club systemd[1]: Can't open PID file /var/run/dovecot/master.pid (yet?) after start: No such file or directory
May 08 02:09:15 server.smartwebsolutions.club systemd[1]: Started Dovecot IMAP/POP3 email server.
[root@server ~]# ll /var/run/dovecot/
total 8
srw------- 1 root root 0 May 8 02:09 anvil
srw------- 1 root root 0 May 8 02:09 anvil-auth-penalty
srw------- 1 dovecot root 0 May 8 02:09 auth-client
srw------- 1 dovecot root 0 May 8 02:09 auth-login
srw------- 1 root root 0 May 8 02:09 auth-master
-rw------- 1 root root 32 May 6 02:54 auth-token-secret.dat
srw-rw-rw- 1 vmail mail 0 May 8 02:09 auth-userdb
srw------- 1 dovecot root 0 May 8 02:09 auth-worker
srw------- 1 root root 0 May 8 02:09 config
srw-rw-rw- 1 vmail mail 0 May 8 02:09 dict
srw------- 1 root root 0 May 8 02:09 dict-async
srw------- 1 root root 0 May 8 02:09 director-admin
srw-rw-rw- 1 root root 0 May 8 02:09 dns-client
srw------- 1 root root 0 May 8 02:09 doveadm-server
lrwxrwxrwx 1 root root 25 May 8 02:09 dovecot.conf -> /etc/dovecot/dovecot.conf
drwxr-xr-x 2 root root 40 May 6 00:54 empty
srw------- 1 root root 0 May 8 02:09 imap-hibernate
srw------- 1 root root 0 May 8 02:09 imap-master
srw-rw-rw- 1 root root 0 May 8 02:09 imap-urlauth
srw------- 1 dovecot root 0 May 8 02:09 imap-urlauth-worker
srw-rw-rw- 1 root root 0 May 8 02:09 indexer
srw------- 1 dovecot root 0 May 8 02:09 indexer-worker
srw------- 1 root root 0 May 8 02:09 ipc
srw-rw-rw- 1 root root 0 May 8 02:09 lmtp
srw------- 1 root root 0 May 8 02:09 log-errors
drwxr-x--- 2 root dovenull 160 May 8 02:09 login
srw------- 1 root root 0 May 8 02:09 master
-rw------- 1 root root 6 May 8 02:09 master.pid
srw------- 1 root root 0 May 8 02:09 replication-notify
prw------- 1 root root 0 May 8 02:09 replication-notify-fifo
srw------- 1 dovecot root 0 May 8 02:09 replicator
srw-rw-rw- 1 root root 0 May 8 02:09 ssl-params
srw-rw--w- 1 root root 0 May 8 02:09 stats
prw------- 1 root root 0 May 8 02:09 stats-mail
prw------- 1 root root 0 May 8 02:09 stats-user
drwxr-x--- 2 root dovenull 80 May 8 02:09 token-login
i am having master.pid file cant be found error as below. i have check /var/run/dovecot/master.pid exists with the following permissions. can someone suggest me why i am getting this error as the file and folder already exists with valid pid info inside.
[root@server ~]# service dovecot status -l
Redirecting to /bin/systemctl status -l dovecot.service
● dovecot.service - Dovecot IMAP/POP3 email server
Loaded: loaded (/usr/lib/systemd/system/dovecot.service; enabled; vendor preset: disabled)
Active: active (running) since Fri 2020-05-08 02:09:15 CEST; 10h ago
Docs: man:dovecot(1)
http://wiki2.dovecot.org/
Process: 29745 ExecStop=/usr/bin/doveadm stop (code=exited, status=0/SUCCESS)
Process: 29797 ExecStart=/usr/sbin/dovecot (code=exited, status=0/SUCCESS)
Process: 29794 ExecStartPre=/usr/sbin/portrelease dovecot (code=exited, status=0/SUCCESS)
Process: 29787 ExecStartPre=/usr/libexec/dovecot/prestartscript (code=exited, status=0/SUCCESS)
Main PID: 29801 (dovecot)
CGroup: /system.slice/dovecot.service
├─19670 dovecot/ssl-params
├─29801 /usr/sbin/dovecot
├─29802 dovecot/anvil
├─29803 dovecot/log
└─29805 dovecot/config
May 08 02:09:14 server.smartwebsolutions.club systemd[1]: Starting Dovecot IMAP/POP3 email server...
May 08 02:09:15 server.smartwebsolutions.club systemd[1]: Can't open PID file /var/run/dovecot/master.pid (yet?) after start: No such file or directory
May 08 02:09:15 server.smartwebsolutions.club systemd[1]: Started Dovecot IMAP/POP3 email server.
[root@server ~]# ll /var/run/dovecot/
total 8
srw------- 1 root root 0 May 8 02:09 anvil
srw------- 1 root root 0 May 8 02:09 anvil-auth-penalty
srw------- 1 dovecot root 0 May 8 02:09 auth-client
srw------- 1 dovecot root 0 May 8 02:09 auth-login
srw------- 1 root root 0 May 8 02:09 auth-master
-rw------- 1 root root 32 May 6 02:54 auth-token-secret.dat
srw-rw-rw- 1 vmail mail 0 May 8 02:09 auth-userdb
srw------- 1 dovecot root 0 May 8 02:09 auth-worker
srw------- 1 root root 0 May 8 02:09 config
srw-rw-rw- 1 vmail mail 0 May 8 02:09 dict
srw------- 1 root root 0 May 8 02:09 dict-async
srw------- 1 root root 0 May 8 02:09 director-admin
srw-rw-rw- 1 root root 0 May 8 02:09 dns-client
srw------- 1 root root 0 May 8 02:09 doveadm-server
lrwxrwxrwx 1 root root 25 May 8 02:09 dovecot.conf -> /etc/dovecot/dovecot.conf
drwxr-xr-x 2 root root 40 May 6 00:54 empty
srw------- 1 root root 0 May 8 02:09 imap-hibernate
srw------- 1 root root 0 May 8 02:09 imap-master
srw-rw-rw- 1 root root 0 May 8 02:09 imap-urlauth
srw------- 1 dovecot root 0 May 8 02:09 imap-urlauth-worker
srw-rw-rw- 1 root root 0 May 8 02:09 indexer
srw------- 1 dovecot root 0 May 8 02:09 indexer-worker
srw------- 1 root root 0 May 8 02:09 ipc
srw-rw-rw- 1 root root 0 May 8 02:09 lmtp
srw------- 1 root root 0 May 8 02:09 log-errors
drwxr-x--- 2 root dovenull 160 May 8 02:09 login
srw------- 1 root root 0 May 8 02:09 master
-rw------- 1 root root 6 May 8 02:09 master.pid
srw------- 1 root root 0 May 8 02:09 replication-notify
prw------- 1 root root 0 May 8 02:09 replication-notify-fifo
srw------- 1 dovecot root 0 May 8 02:09 replicator
srw-rw-rw- 1 root root 0 May 8 02:09 ssl-params
srw-rw--w- 1 root root 0 May 8 02:09 stats
prw------- 1 root root 0 May 8 02:09 stats-mail
prw------- 1 root root 0 May 8 02:09 stats-user
drwxr-x--- 2 root dovenull 80 May 8 02:09 token-login
14
CentOS 7 Problems / client @0x7f9c80041c20 127.0.0.1#32918 (.): query (cache) './NS/IN' denied
« on: May 04, 2020, 08:02:43 AM »
hello,
i am getting following denied messages for my named service. anybody kindly suggest
-----------------------------------------------------------------------------------------------------------------------------------------
[root@server ~]# service named status -l
Redirecting to /bin/systemctl status -l named.service
● named.service - Berkeley Internet Name Domain (DNS)
Loaded: loaded (/usr/lib/systemd/system/named.service; enabled; vendor preset: disabled)
Active: active (running) since Sun 2020-05-03 22:04:56 CEST; 11h ago
Process: 835 ExecStart=/usr/sbin/named -u named -c ${NAMEDCONF} $OPTIONS (code=exited, status=0/SUCCESS)
Process: 782 ExecStartPre=/bin/bash -c if [ ! "$DISABLE_ZONE_CHECKING" == "yes" ]; then /usr/sbin/named-checkconf -z "$NAMEDCONF"; else echo "Checking of zone files is disabled"; fi (code=exited, status=0/SUCCESS)
Main PID: 868 (named)
CGroup: /system.slice/named.service
└─868 /usr/sbin/named -u named -c /etc/named.conf
May 04 09:47:52 server.smartwebsolutions.club named[868]: client @0x7f9c80041c20 127.0.0.1#32918 (.): query (cache) './NS/IN' denied
May 04 09:47:52 server.smartwebsolutions.club named[868]: client @0x7f9c7801d450 127.0.0.1#38424 (.): query (cache) './NS/IN' denied
May 04 09:48:12 server.smartwebsolutions.club named[868]: client @0x7f9c800d42f0 210.202.200.22#64976 (125.10.10.10.in-addr.arpa): query (cache) '125.10.10.10.in-addr.arpa/PTR/IN' denied
May 04 09:49:05 server.smartwebsolutions.club named[868]: client @0x7f9c800d42f0 210.202.200.22#64976 (66.10.10.10.in-addr.arpa): query (cache) '66.10.10.10.in-addr.arpa/PTR/IN' denied
May 04 09:52:52 server.smartwebsolutions.club named[868]: client @0x7f9c80041c20 127.0.0.1#50594 (.): query (cache) './NS/IN' denied
May 04 09:52:52 server.smartwebsolutions.club named[868]: client @0x7f9c780486e0 127.0.0.1#38502 (.): query (cache) './NS/IN' denied
May 04 09:56:25 server.smartwebsolutions.club named[868]: client @0x7f9c800c5cc0 210.202.200.22#64976 (111.10.10.10.in-addr.arpa): query (cache) '111.10.10.10.in-addr.arpa/PTR/IN' denied
May 04 09:56:57 server.smartwebsolutions.club named[868]: client @0x7f9c800c5cc0 210.202.200.22#64976 (211.10.10.10.in-addr.arpa): query (cache) '211.10.10.10.in-addr.arpa/PTR/IN' denied
May 04 09:57:52 server.smartwebsolutions.club named[868]: client @0x7f9c80041c20 127.0.0.1#36754 (.): query (cache) './NS/IN' denied
May 04 09:57:52 server.smartwebsolutions.club named[868]: client @0x7f9c800b7150 127.0.0.1#38550 (.): query (cache) './NS/IN' denied
[root@server ~]#
i am getting following denied messages for my named service. anybody kindly suggest
-----------------------------------------------------------------------------------------------------------------------------------------
[root@server ~]# service named status -l
Redirecting to /bin/systemctl status -l named.service
● named.service - Berkeley Internet Name Domain (DNS)
Loaded: loaded (/usr/lib/systemd/system/named.service; enabled; vendor preset: disabled)
Active: active (running) since Sun 2020-05-03 22:04:56 CEST; 11h ago
Process: 835 ExecStart=/usr/sbin/named -u named -c ${NAMEDCONF} $OPTIONS (code=exited, status=0/SUCCESS)
Process: 782 ExecStartPre=/bin/bash -c if [ ! "$DISABLE_ZONE_CHECKING" == "yes" ]; then /usr/sbin/named-checkconf -z "$NAMEDCONF"; else echo "Checking of zone files is disabled"; fi (code=exited, status=0/SUCCESS)
Main PID: 868 (named)
CGroup: /system.slice/named.service
└─868 /usr/sbin/named -u named -c /etc/named.conf
May 04 09:47:52 server.smartwebsolutions.club named[868]: client @0x7f9c80041c20 127.0.0.1#32918 (.): query (cache) './NS/IN' denied
May 04 09:47:52 server.smartwebsolutions.club named[868]: client @0x7f9c7801d450 127.0.0.1#38424 (.): query (cache) './NS/IN' denied
May 04 09:48:12 server.smartwebsolutions.club named[868]: client @0x7f9c800d42f0 210.202.200.22#64976 (125.10.10.10.in-addr.arpa): query (cache) '125.10.10.10.in-addr.arpa/PTR/IN' denied
May 04 09:49:05 server.smartwebsolutions.club named[868]: client @0x7f9c800d42f0 210.202.200.22#64976 (66.10.10.10.in-addr.arpa): query (cache) '66.10.10.10.in-addr.arpa/PTR/IN' denied
May 04 09:52:52 server.smartwebsolutions.club named[868]: client @0x7f9c80041c20 127.0.0.1#50594 (.): query (cache) './NS/IN' denied
May 04 09:52:52 server.smartwebsolutions.club named[868]: client @0x7f9c780486e0 127.0.0.1#38502 (.): query (cache) './NS/IN' denied
May 04 09:56:25 server.smartwebsolutions.club named[868]: client @0x7f9c800c5cc0 210.202.200.22#64976 (111.10.10.10.in-addr.arpa): query (cache) '111.10.10.10.in-addr.arpa/PTR/IN' denied
May 04 09:56:57 server.smartwebsolutions.club named[868]: client @0x7f9c800c5cc0 210.202.200.22#64976 (211.10.10.10.in-addr.arpa): query (cache) '211.10.10.10.in-addr.arpa/PTR/IN' denied
May 04 09:57:52 server.smartwebsolutions.club named[868]: client @0x7f9c80041c20 127.0.0.1#36754 (.): query (cache) './NS/IN' denied
May 04 09:57:52 server.smartwebsolutions.club named[868]: client @0x7f9c800b7150 127.0.0.1#38550 (.): query (cache) './NS/IN' denied
[root@server ~]#
15
CentOS 7 Problems / pam_limits(crond:session): invalid line 'user-name hard nproc ' - skipped
« on: May 03, 2020, 08:37:29 PM »
hello,
i am getting the below warning with crond.service, is it critical ? how to fix it ? any suggestions......
-------------------------------------------------------------------------------------------------------------------
WARNING!
● crond.service - Command Scheduler
Loaded: loaded (/usr/lib/systemd/system/crond.service; enabled; vendor preset: enabled)
Active: active (running) since Sun 2020-05-03 12:08:05 CEST; 10h ago
Main PID: 545 (crond)
CGroup: /system.slice/crond.service
└─545 /usr/sbin/crond -n
May 03 18:00:01 server.smartwebsolutions.club crond[22006]: pam_limits(crond:session): invalid line 'sws hard nproc ' - skipped
May 03 18:00:01 server.smartwebsolutions.club crond[22007]: pam_limits(crond:session): invalid line 'sws hard nproc ' - skipped
May 03 18:00:01 server.smartwebsolutions.club crond[22007]: pam_limits(crond:session): invalid line 'sws hard nofile ' - skipped
May 03 18:00:01 server.smartwebsolutions.club crond[22006]: pam_limits(crond:session): invalid line 'sws hard nofile ' - skipped
May 03 18:00:01 server.smartwebsolutions.club crond[22008]: pam_limits(crond:session): invalid line 'sws hard nproc ' - skipped
May 03 18:00:01 server.smartwebsolutions.club crond[22008]: pam_limits(crond:session): invalid line 'sws hard nofile ' - skipped
May 03 18:01:01 server.smartwebsolutions.club crond[22108]: pam_limits(crond:session): invalid line 'sws hard nproc ' - skipped
May 03 18:01:01 server.smartwebsolutions.club crond[22108]: pam_limits(crond:session): invalid line 'sws hard nofile ' - skipped
May 03 20:11:01 server.smartwebsolutions.club crond[545]: (root) RELOAD (/var/spool/cron/root)
May 03 20:15:01 server.smartwebsolutions.club crond[545]: (root) RELOAD (/var/spool/cron/root)
i am getting the below warning with crond.service, is it critical ? how to fix it ? any suggestions......
-------------------------------------------------------------------------------------------------------------------
WARNING!
● crond.service - Command Scheduler
Loaded: loaded (/usr/lib/systemd/system/crond.service; enabled; vendor preset: enabled)
Active: active (running) since Sun 2020-05-03 12:08:05 CEST; 10h ago
Main PID: 545 (crond)
CGroup: /system.slice/crond.service
└─545 /usr/sbin/crond -n
May 03 18:00:01 server.smartwebsolutions.club crond[22006]: pam_limits(crond:session): invalid line 'sws hard nproc ' - skipped
May 03 18:00:01 server.smartwebsolutions.club crond[22007]: pam_limits(crond:session): invalid line 'sws hard nproc ' - skipped
May 03 18:00:01 server.smartwebsolutions.club crond[22007]: pam_limits(crond:session): invalid line 'sws hard nofile ' - skipped
May 03 18:00:01 server.smartwebsolutions.club crond[22006]: pam_limits(crond:session): invalid line 'sws hard nofile ' - skipped
May 03 18:00:01 server.smartwebsolutions.club crond[22008]: pam_limits(crond:session): invalid line 'sws hard nproc ' - skipped
May 03 18:00:01 server.smartwebsolutions.club crond[22008]: pam_limits(crond:session): invalid line 'sws hard nofile ' - skipped
May 03 18:01:01 server.smartwebsolutions.club crond[22108]: pam_limits(crond:session): invalid line 'sws hard nproc ' - skipped
May 03 18:01:01 server.smartwebsolutions.club crond[22108]: pam_limits(crond:session): invalid line 'sws hard nofile ' - skipped
May 03 20:11:01 server.smartwebsolutions.club crond[545]: (root) RELOAD (/var/spool/cron/root)
May 03 20:15:01 server.smartwebsolutions.club crond[545]: (root) RELOAD (/var/spool/cron/root)
Pages: [1] 2
