Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - drivel2787

Pages: [1] 2
Scripts / WP Script not working as I install and can't login to dashboard.
« on: December 01, 2021, 03:44:18 PM »
Since I ran some updates last I haven't created a new user in CWP and installed a new WordPress site.  But, last night I attempted and no matter if I use a certain username or not, I can install WordPress.  But, I can't login . If I manually install the username and password, I can login but it takes me to the site and NOT the WordPress dashboard. Any ideas?

I am using CWP pro and updated to the latest of everything. When installer WordPress I can reach the site going to the  But, I get a login, my user doesn't exist i created during the script install, and when i manually create it in phpmyadmin, I get logged into the website home page and not the dashboard of WordPress.  Any ideas?

SSL / Wiped AutoSSL hostname cert and files, reinstalled, same issue
« on: November 17, 2021, 03:34:06 PM »
I have an issue where I have removed all hostname cert files, changed hostname, and then rebuilt mail server, the domains still get a CA Root Cert error, that the cert is not trusted.....  How can this be fixed?

Once Composer is installed how do I setup for PHP to send mail via SSL/TLS?

I wanted to see if anyone has setup wordpress/cwp to default to SSL for sending your email when people fill out contact forms.  Today, mine doesn't appear to do so and I have to manually setup a Wordpress SMTP plugin to get it to work.  I was wondering how one can setup to default to this on the server back end  to avoid this extra leg work.

CentOS-WebPanel GUI / Re: New account can't login to user panel
« on: October 07, 2021, 08:42:20 PM »
I have done a sh /usr/local/cwpsrv/htdocs/resources/scripts/update_cwp and rebooted and if I run it again it acts like it is attempting to re-do it again....  Any idea why it seems like the update isn't taking?  I need to be able to login to this user panel and get my website up ASAP. 

Connecting to (|2606:50c0:8000::154|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 7048262 (6.7M) [application/octet-stream]
Saving to: ‘roundcubemail-1.4.11-complete.tar.gz’

roundcubemail-1.4.11-complete.tar.gz  100%[======================================================================>]   6.72M  --.-KB/s    in 0.05s   

2021-10-07 16:38:57 (125 MB/s) - ‘roundcubemail-1.4.11-complete.tar.gz’ saved [7048262/7048262]

--2021-10-07 16:38:58--
Resolving (,,, ...
Connecting to (||:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4640961 (4.4M) [application/zip]
Saving to: ‘/usr/local/cwpsrv/var/services/roundcube/’                        100%[======================================================================>]   4.43M  1.93MB/s    in 2.3s   

2021-10-07 16:39:00 (1.93 MB/s) - ‘/usr/local/cwpsrv/var/services/roundcube/’ saved [4640961/4640961]

Postfix / Re: After a server restore POSTFIX no longer works
« on: October 07, 2021, 03:34:47 AM »
I have renewed certs, I have rebuild the servers after adding DKIM and SPF.  I modified config where needed.  Now I can't connect on ports 993/995 and 465.  My mail server doesn't detect automatically when using thunderbird or outlook.  I also get the following in my log:

Oct  6 23:26:41 host1 postfix/smtpd[263521]: fatal: no SASL authentication mechanisms
Oct  6 23:29:59 host1 postfix/master[1904]: warning: process /usr/libexec/postfix/smtpd pid 341714 exit status 1
Oct  6 23:29:59 host1 postfix/master[1904]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling
Oct  6 23:31:35 host1 postfix/smtpd[341819]: connect from[]

This thing has NOT worked once since I setup CWP multiple times.  I even built it from scratch and it wouldn't work until I paid support and they supposedly did exactly what I did and it "MAGICALLY" worked.  LOL. 

Postfix / After a server restore POSTFIX no longer works
« on: October 06, 2021, 12:57:15 PM »

I paid for CWP support to fix my postfix and mail server so that I wasn't getting invalid certificates.  They advised all they did was add my server to the /etc/hosts in an entry and rebuild my email server.  After restoring a snapshot due to other reasons (where I didn't mess with postfix at all) I am no longer able to connect to mail servers and send email.  I also had tried what they said they did probably 20 times no joke and this didn't fix the issue which is why I paid for support!  Has anyone ran into this or no SASL authentication mechanisms?  What did you do to fix it?  Any tips?  Appreciate anyone's help!

CentOS-WebPanel GUI / New account can't login to user panel
« on: October 06, 2021, 12:54:51 PM »

I have an account that I had to delete and then re-add (even tried a completely different username) but whenever I go to login to the user panel to install wordpress for the site, it just loops me right back to the login.  I have fixed permissions, I have deleted everything and tried to start fresh with this particular user/site, I've tried different browsers, I've cleared cache/history/etc..., I have ensured that CSF ports are opened that are required..  Any ideas? 

I have a server in a VPS I setup, got everything setup, mail (paid for support to do this), I ended up changing a few things not related to DNS or email and then magically the CWP my DNS zones now ALL show no ip address associated with the domain.  I have fixed them and before I get through them all I click on "Check All Zones" and then magically DNS entries are GONE and no IP address found.  I have deleted zones, re-added them, rebuilt the zone, I'm about to just blow this entire setup away and start over which sucks because it took me 2-3 weeks to get this far. 


BROOOOOOOOOOOOO thanks so much you just saved my LIFE!  LOL.

Cloudflare really had nothing to do with it.  I just tried that to see if it was a server thing.  I removed it, had it not even setup through cloudflare, and had the same issue.  I literally said screw this and paid CWP one time support.  The funny thing is they edited /etc/hosts and added server hostname and public IP, and rebuilt email serves.  I did both of these things at least 10 times before paying.  Same issue every single time.  So it's kinda odd that they did the same thing I did but it worked for them and not me?  LOL.

Server has FQDN...  I have assigned a hostname, I have updated, I have used let's encrypt SSL, I have used cloudflare SSL, I have multiple domains on the same server and IP address...  So I think what is happening s for some reason it's using the default certificate for the other domain(s). 

I fixed inbound mail....  But outbound is still an issue.  When attempting to send outbound from one of my domains I get the following in tail-f /var/log/maillog:

Sep 30 15:36:03 host1 postfix/smtpd[306133]: connect from xxxxx

Sep 30 15:36:03 host1 postfix/smtpd[306133]: TLS SNI x.x.x from x
  • not matched, using default chain

Sep 30 15:36:03 host1 postfix/smtpd[306133]: Anonymous TLS connection established from x
  • : TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)

Sep 30 15:36:03 host1 postfix/smtpd[306133]: lost connection after STARTTLS from x

Sep 30 15:36:03 host1 postfix/smtpd[306133]: disconnect from x
  • ehlo=1 starttls=1 commands=2

I have tried this several times.  It rebuilds BUT it does not seem to build everything correct because I can't send/receive email.  I check tail -f /var/log/maillog and it is getting blocked.  I have looked and it doesn't appear that it creates everything in the postfix SQL database correctly as I don't see all the domains email addresses I've created.  When I edit /etc/postfix/ I can tweak some of the configuration in there to get it to send/receive emails internally and externally (some have got blocked until I made a manual file to permit certain addresses for alias, relay, etc....).  BUT even doing that the mail then doesn't show in the inbox for this email.  Also, when attempting to set the email up using the native iPhone mail app it says there is a certificate error when I have a valid certificate created through CWP.....

Any ideas?  What information would be beneficial to show this?  Also, initially emails would go to spam inbox for new emails sent from postfix/vps/cwp.  I need to figure that out as well because I can't have emails going to spam that will be missed by people that receive emails from this setup.

Postfix / Postfix not allowing inbound email. Outbound is working fine.
« on: September 25, 2021, 04:29:58 PM »
Sep 25 02:40:54 host1 postfix/master[802591]: terminating on signal 15
Sep 25 02:40:54 host1 postfix[803347]: Postfix is running with backwards-compatible default settings
Sep 25 02:40:54 host1 postfix[803347]: See for details
Sep 25 02:40:54 host1 postfix[803347]: To disable backwards compatibility use "postconf compatibility_level=2" and "postfix reload"
Sep 25 02:40:54 host1 postfix/postfix-script[803402]: warning: not owned by root: /etc/postfix/./
Sep 25 02:40:54 host1 postfix/postfix-script[803415]: starting the Postfix mail system
Sep 25 02:40:54 host1 postfix/master[803417]: daemon started -- version 3.4.8, configuration /etc/postfix
Sep 25 02:40:54 host1 postfix/qmgr[803419]: 47E0B65D4B5: from=<>, size=3953, nrcpt=1 (queue active)
Sep 25 02:40:54 host1 postfix/lmtp[803422]: 47E0B65D4B5: to=<>,[private/dovecot-lmtp], delay=2194, delays=2194/0.02/0/0, dsn=4.2.0, status=deferred (host[private/dovecot-lmtp] said: 451 4.2.0 <> Internal error occurred. Refer to server log for more information. [2021-09-25 02:40:54] (in reply to end of DATA command))
Sep 25 02:41:04 host1 postfix/smtpd[803432]: connect from[]
Sep 25 02:41:17 host1 postfix/smtpd[803442]: connect from[]
Sep 25 02:41:17 host1 postfix/smtpd[803442]: warning: loading SNI data for ignoring PEM type: CERTIFICATE REQUEST
Sep 25 02:41:17 host1 postfix/smtpd[803442]: Anonymous TLS connection established from[] to TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256
Sep 25 02:41:17 host1 postfix/smtpd[803442]: NOQUEUE: reject: RCPT from[]: 450 4.7.0 <>: Recipient address rejected: defer_if_permit requested; from=<> to=<> proto=ESMTP helo=<>
Sep 25 02:41:18 host1 postfix/smtpd[803442]: disconnect from[] ehlo=2 starttls=1 mail=1 rcpt=0/1 bdat=0/1 quit=1 commands=5/7[] ehlo=2 starttls=1 mail=1 rcpt=1 bdat=1 quit=1 commands=7
Sep 25 00:43:07 host1 postfix/pipe[665998]: 2BBA4FC1B7: to=<>, relay=dovecot, delay=0.09, delays=0.06/0.01/0/0.02, dsn=4.3.0, status=deferred (temporary failure. Command output: lda( Error: net_connect_unix(/run/dovecot/stats-writer) failed: Permission denied

I don't know what I'm not doing right or what needs changed to get this working.  A buddy of mine setup CWP, and everything, and email just worked, but mine I've had nothing but issues getting to get it working.    Any tips?  I got this far tailing the log and playing around with settings until I got email to go outbound and not hit spam box.

Pages: [1] 2