Author Topic: Help! How to configuring servers for connection Slave DNS Server?  (Read 5430 times)

0 Members and 1 Guest are viewing this topic.

Offline
*
Hello.
I have a VPS-1 CWPPro server that runs several sites, and I want to configure a second DNS on another server (VPS-2).
I installed pure CWP on VPS-2, since here https://forum.centos-webpanel.com/index.php?topic=6904.msg24552#msg24552 says that the Slave server does not need CWPPro, and then the following:
1) I don’t understand on which server I should execute the commands from the article at this address https://wiki.centos-webpanel.com/slave-dns-server-manager-download-version. On the VPS-1 or VPS-2, or both?
2) Is it necessary and most importantly how to reconfigure ns addresses?
I put it first at the domain registrar I need to specify the VPS-2 ip address for ns2, and then what are the steps?
Thanks in advance for your help.

*****************************

Здравствуйте.
У меня есть VPS-1 CWPPro сервер на котором работают несколько сайтов, и я хочу настроить второй DNS на другом сервере (VPS-2)
На VPS-2 я установил чистую CWP, так как тут https://forum.centos-webpanel.com/index.php?topic=6904.msg24552#msg24552 сказано, что для Slave сервера не нужно CWPPro, а дальше следующее:
1) Я не понимаю на каком сервере мне выполнять команды из статьи по этому адресу https://wiki.centos-webpanel.com/slave-dns-server-manager-download-version. На VPS-1 или VPS-2 или на обоих?
2) Надо ли и главное как перенастраивать ns адреса?
Я пологаю сперва у регистратора домена мне надо указать ip адрес VPS-2 для ns2, а дальше какие шаги?
Заранее спасибо за помощь.

Offline
**
Re: Help! How to configuring servers for connection Slave DNS Server?
« Reply #1 on: April 17, 2020, 08:42:30 PM »
install DNS slave manager on VPS2.
Follow instructions here - https://opentechy.com/how-to-setup-dns-cluster-on-cwp

Offline
*
Re: Help! How to configuring servers for connection Slave DNS Server?
« Reply #2 on: April 19, 2020, 06:01:46 PM »
Thanks for the help

Offline
*
Re: Help! How to configuring servers for connection Slave DNS Server?
« Reply #3 on: July 29, 2022, 05:50:39 AM »
install DNS slave manager on VPS2.
Follow instructions here - https://opentechy.com/how-to-setup-dns-cluster-on-cwp
Can I set up DNS Slave Manager on a VPS with CWP Pro installed?