This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Updates / Server updates don't seem to be happening
« on: March 15, 2025, 12:00:41 PM »
It has been over a month since I last saw any updates that were ready to be installed on the server. There is 1 update that shows up for MariaDB and it is rather strange.
In the control panel under YUM Manager it some times shows as 7.0. If I run the update it says it was successful and reloads with version 7.1 showing as availble. I run 7.1 then 7.2 shows up. Run it and go back to the Yum Manager page and it is back to needing 7.1
If I run the YUM command from the command line I see it is actually failing to install.
If I go to the mirror link manually I can see in the yum folder there is no 10.4 folder.
How can I fix this mistake?
And again I have not seen any other updates for the server in a month.
CWPpro version: 0.9.8.1200
MySQL version: 10.4.34-MariaDB
In the control panel under YUM Manager it some times shows as 7.0. If I run the update it says it was successful and reloads with version 7.1 showing as availble. I run 7.1 then 7.2 shows up. Run it and go back to the Yum Manager page and it is back to needing 7.1
If I run the YUM command from the command line I see it is actually failing to install.
Quote
[root@server1 ~]# yum update
MariaDB 7.2 B/s | 10 B 00:01
Errors during downloading metadata for repository 'mariadb':
- Status code: 404 for http://mirror.mariadb.org/yum/10.4/centos8-amd64/repoda ta/repomd.xml (IP: 162.55.42.214)
Error: Failed to download metadata for repo 'mariadb': Cannot download repomd.xm l: Cannot download repodata/repomd.xml: All mirrors were tried
[root@server1 ~]# yum update
MariaDB 7.1 B/s | 10 B 00:01
Errors during downloading metadata for repository 'mariadb':
- Status code: 404 for http://mirror.mariadb.org/yum/10.4/centos8-amd64/repodata/repomd.xml (IP: 162.55.42.214)
Error: Failed to download metadata for repo 'mariadb': Cannot download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried
[root@server1 ~]# yum update
MariaDB 7.1 B/s | 10 B 00:01
Errors during downloading metadata for repository 'mariadb':
- Status code: 404 for http://mirror.mariadb.org/yum/10.4/centos8-amd64/repodata/repomd.xml (IP: 162.55.42.214)
Error: Failed to download metadata for repo 'mariadb': Cannot download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried
[root@server1 ~]#
If I go to the mirror link manually I can see in the yum folder there is no 10.4 folder.
How can I fix this mistake?
And again I have not seen any other updates for the server in a month.
CWPpro version: 0.9.8.1200
MySQL version: 10.4.34-MariaDB
2
E-Mail / Box Trapper feature
« on: December 05, 2024, 02:58:17 AM »
In our old cPanel servers there was a function called "Box Trapper" does that function exist for CWP? I can't find it anywhere.
3
DNS / Permission problem when restarting BIND DNS Server
« on: July 25, 2024, 11:39:40 PM »
I have a server that is running with 5 accounts that were manually added. Today I had to add the last 2 accounts to it. For those accounts I used the cpanel to CWP migration method. The account imported fine but the dns records in one of them were botched. They referenced the old nameservers.
I used the rebuild zone button and that looked like it should have fixed the issue but the one zone still would not get an IP Address.
So I did the dumb thing and restarted BIND DNS Server from the Dashboard. It stopped it fine but when it tries to start it there is a permission issue.
I am not sure what I broke or how to fix it.
I used the rebuild zone button and that looked like it should have fixed the issue but the one zone still would not get an IP Address.
So I did the dumb thing and restarted BIND DNS Server from the Dashboard. It stopped it fine but when it tries to start it there is a permission issue.
I am not sure what I broke or how to fix it.
Quote
Jul 25 16:30:58 myurl4here.org named[9558]: loading configuration from '/etc/named.conf'
Jul 25 16:30:58 myurl4here.org named[9558]: /etc/named.conf:13: change directory to '/var/named' failed: permission denied
Jul 25 16:30:58 myurl4here.org named[9558]: /etc/named.conf:13: parsing failed: permission denied
Jul 25 16:30:58 myurl4here.org named[9558]: loading configuration: permission denied
Jul 25 16:30:58 myurl4here.org named[9558]: exiting (due to fatal error)
Jul 25 16:30:58 myurl4here.org systemd[1]: named.service: Control process exited, code=exited status=1
Jul 25 16:30:58 myurl4here.org systemd[1]: named.service: Failed with result 'exit-code'.
4
CSF Firewall / Suspicious File Alert
« on: April 18, 2024, 03:32:40 PM »
I setup a new server last week and since I got the DNS to resolve correct (allowing it to send emails) I keep getting these 2 messages.
Note that I do not have this issue with my other install of CWP.
Time: Thu Apr 18 08:05:23 2024 -0700
File: /var/tmp/.root_0f8430_salt/pyall/certifi/core.py
Reason: Script, file extension
Owner: root:root (0:0)
Action: No action taken
Time: Thu Apr 18 08:05:23 2024 -0700
File: /var/tmp/.root_0f8430_salt/pyall/salt/grains/core.py
Reason: Script, file extension
Owner: root:root (0:0)
Action: No action taken
I scanned that directory with CalmAV and it found nothing.
Here is the file structure of the .root_0f8430_salt directory.
[root@ .root_0f8430_salt]# ls -l
total 52
-rw-r--r-- 1 root root 65 Apr 5 02:45 code-checksum
-rw-r--r-- 1 salt salt 40 Apr 1 20:23 ext_version
-rw-r--r-- 1 root root 13 Apr 5 02:45 grains
-rw-r--r-- 1 root root 158 Apr 5 02:45 minion
drwx------ 9 root root 4096 Apr 5 02:45 py3
drwx------ 6 root root 4096 Apr 5 02:45 pyall
drwx------ 3 root root 4096 Apr 5 02:45 running_data
-rw-r--r-- 1 root root 757 Apr 5 02:45 salt-call
-rw------- 1 root root 8629 Apr 5 02:45 salt_state.tgz
-rw-r--r-- 1 root root 8 Apr 5 02:45 supported-versions
-rw-r--r-- 1 root root 6 Apr 5 02:45 version
[root@ .root_0f8430_salt]#
Note that I do not have this issue with my other install of CWP.
Time: Thu Apr 18 08:05:23 2024 -0700
File: /var/tmp/.root_0f8430_salt/pyall/certifi/core.py
Reason: Script, file extension
Owner: root:root (0:0)
Action: No action taken
Time: Thu Apr 18 08:05:23 2024 -0700
File: /var/tmp/.root_0f8430_salt/pyall/salt/grains/core.py
Reason: Script, file extension
Owner: root:root (0:0)
Action: No action taken
I scanned that directory with CalmAV and it found nothing.
Here is the file structure of the .root_0f8430_salt directory.
[root@ .root_0f8430_salt]# ls -l
total 52
-rw-r--r-- 1 root root 65 Apr 5 02:45 code-checksum
-rw-r--r-- 1 salt salt 40 Apr 1 20:23 ext_version
-rw-r--r-- 1 root root 13 Apr 5 02:45 grains
-rw-r--r-- 1 root root 158 Apr 5 02:45 minion
drwx------ 9 root root 4096 Apr 5 02:45 py3
drwx------ 6 root root 4096 Apr 5 02:45 pyall
drwx------ 3 root root 4096 Apr 5 02:45 running_data
-rw-r--r-- 1 root root 757 Apr 5 02:45 salt-call
-rw------- 1 root root 8629 Apr 5 02:45 salt_state.tgz
-rw-r--r-- 1 root root 8 Apr 5 02:45 supported-versions
-rw-r--r-- 1 root root 6 Apr 5 02:45 version
[root@ .root_0f8430_salt]#
Pages: [1]