cwp-cwp migration Connection not reached The following error occurred

[webaits]

I'm trying to migrate user accounts/database/emails etc from the old CWP pro server to the new CWP free server.
However, I'm facing the error message:

cwp-cwp migration Connection not reached The following error occurred

And the complete account_transfer.log message:

Code Select Expand

export SSHPASS='PASSWORD'; /usr/bin/sshpass -e /usr/bin/ssh -p 5656 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=quiet  root@123.123.123.123
test -d /usr/local/cwp/ && echo 'true' || echo 'false'
true

export SSHPASS=**********;/usr/bin/sshpass -e ssh-copy-id "-p 5656" root@123.123.123.123 -o StrictHostKeyChecking=no 2>&1
/usr/bin/ssh -p 2298 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=quiet root@103.102.46.20 test -d /usr/local/cwp/ && echo 'true' || echo 'false' 2>&1


Here is no true or false after the last log line above.

I have already tried everything as shown in the video on the link:
https://docs.control-webpanel.com/docs/admin-guide/user-accounts/cwp-to-cwp-migration

And the command for the source server:

Code Select Expand

ssh root@123.123.123.123 -p 5656
Outputs

root

There is no firewall or additional setting like NAT at the host level.
And I have tried migration by disabling the firewall on both sides.

Below is SSH config for reference.

Code Select Expand

PasswordAuthentication yes
ChallengeResponseAuthentication no
UsePAM no
#UsePAM yes also checked

Any help to be able to utilize CWP to CWP migration?

[LexBart]

Hi! I see that the error appeared not so long ago, if I found the same question I wanted to ask.

Were you able to find the cause of the error? I have the exact same problem. I did a migration before and there was no problem.

Now I see the same error in the log files and in the last line there is also no "true" or "false"

At the same time, if I run the script manually

Code Select Expand

sshpass -p PASSWORD /usr/bin/ssh -p PORT -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=quiet root@HOST test -d /usr/local/cwp/ && echo 'true' || echo 'false' 2>&1

The server will answer "true".

I would like to understand where the error could be.

[webaits]

I was in a hurry and the CWP community/mods/support aren't that enough active.
I'm using the pro version.
So I had to perform the manual migration.
I'm not sure what was causing the issue.

[setecabanas]

I have same problem 

cwp-cwp tool migration is not working

[Mickeys]

I have same problem 

cwp-cwp tool migration is not working

I have same problem and solved executing from console:

Code Select Expand


export SSHPASS=password;/usr/bin/sshpass -e ssh-copy-id "-p Port" rootuser@xxx.xxx.xxx.xxx -o StrictHostKeyChecking=no 2>&1

ssh -p ' 3814' -o 'StrictHostKeyChecking=no' 'root@149.202.78.83'



and now:
go migration and test and save, ready to migrate.

[PakPos]

I have same problem 

cwp-cwp tool migration is not working

I have same problem and solved executing from console:

Code Select Expand


export SSHPASS=password;/usr/bin/sshpass -e ssh-copy-id "-p Port" rootuser@xxx.xxx.xxx.xxx -o StrictHostKeyChecking=no 2>&1

ssh -p ' 3814' -o 'StrictHostKeyChecking=no' 'root@149.202.78.83'



and now:
go migration and test and save, ready to migrate.

you mean,, we must enter the command from cli first.. then we can use the GUI ?


i hope someone here have time to create tutorial in one post step by step... so n00b like me can be follow the instruction step by step...

and i hope staff make a batch script so we only need run SH.. then fill the question

[Mickeys]

you mean,, we must enter the command from cli first.. then we can use the GUI ?

from Remote Terminal login as root.

[PakPos]

you mean,, we must enter the command from cli first.. then we can use the GUI ?

from Remote Terminal login as root.

yes i mean remote terminal like putty.... under cli


so this is what i should to do
old server A: 1.1.1.1
username : root
pass : 12121212

new server B: 2.2.2.2
username: root
pass : 090909

firewall = off
ssh port : 2222 (both A and B)

step one:
connect to server using CLI, if remote then we can use like puTTY

login to server A

Code Select Expand

root@servera: # export SSHPASS=121212;/usr/bin/sshpass -e ssh-copy-id "-p 2222" root@1.1.1.1 -o StrictHostKeyChecking=no 2>&1 ssh -p ' 2222' -o 'StrictHostKeyChecking=no' 'root@2.2.2.2'
enter
then go to CWP GUI do cwp-to-cwp migration just like tutorial

correct?

[josemnunez]

Make sure to put the ssh key in the authorized list on the origin server

[kecoamumet]

you mean,, we must enter the command from cli first.. then we can use the GUI ?

from Remote Terminal login as root.

yes i mean remote terminal like putty.... under cli


so this is what i should to do
old server A: 1.1.1.1
username : root
pass : 12121212

new server B: 2.2.2.2
username: root
pass : 090909

firewall = off
ssh port : 2222 (both A and B)

step one:
connect to server using CLI, if remote then we can use like puTTY

login to server A

Code Select Expand

root@servera: # export SSHPASS=121212;/usr/bin/sshpass -e ssh-copy-id "-p 2222" root@1.1.1.1 -o StrictHostKeyChecking=no 2>&1 ssh -p ' 2222' -o 'StrictHostKeyChecking=no' 'root@2.2.2.2'
enter
then go to CWP GUI do cwp-to-cwp migration just like tutorial

correct?

hey pakpos, do you deliver mails? hehehe..

actually im facing same problem with you. what i do is.

on old server
after doing the API allow stuff than generate the ssh generator

on the new server
you can do this on ssh

Code Select Expand


# export SSHPASS=passwordoldserver;/usr/bin/sshpass -e ssh-copy-id "-p 22" root@ipoldserver -o StrictHostKeyChecking=no 2>&1

# ssh -p ' 22' -o 'StrictHostKeyChecking=no' 'root@ipoldserver'


and please make sure the sshpass is installed on the new server. after that, you can do the cwp to cwp migration stuff.

[sant0s]

Let make simple,

on new server copy Public Key from: # cat /root/.ssh/id_rsa.pub
and paste Public key to Old server: # nano /root/.ssh/authorized_keys

[sundar rajamani]

Hi facing the same error after update cwp I think am facing this issue....

[sundar rajamani]

Let make simple,

on new server copy Public Key from: # cat /root/.ssh/id_rsa.pub
and paste Public key to Old server: # nano /root/.ssh/authorized_keys

Nice this method looks like its working any way once complete will update here

[PakPos]

Let make simple,

on new server copy Public Key from: # cat /root/.ssh/id_rsa.pub
and paste Public key to Old server: # nano /root/.ssh/authorized_keys

i will test soon
right now i already move all account manually

thankyou for your simple explanation

[overseer]

You have to stand on your head, pat your belly, and rub your feet at the same time in order to make this work. Actually, I just had the opportunity to do a CWP -> CWP migration, so here was my solution:
Disable the firewall (CSF & LDF) on both servers.
On both servers, reset the r00t password to be 8 characters or fewer.
In

Code Select Expand

/etc/ssh/sshd_config set:

Code Select Expand

PermitRootLogin yes
StrictModes no
Restart sshd:

Code Select Expand

service sshd restart
On the source server, set up the API key (CWP Settings > API Manager) for CWP Migration using the default CWP template.
On the receiving server, use the interface in User Accounts > CWP->CWP Migration.
After successfully migrating the accounts, revert all changes to your SSH configuration, reset the r00t passphrase to strong ones, and re-enable the firewalls.