This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
Backup / Re: Can't locate diagnostics.pm in @INC (you may need to install th....
« on: July 08, 2025, 02:21:52 PM »How did you install perl? Base install of AlmaLinux 9, then CWP installer? Anything custom installed as pre-requisites (as Starburst recommends on an AL9 system)?
Hi,
I just installed base AL 9, then CWP, and from Starburst I used this, if it's relevant:
UPDATE DEPENDENCIES
Code: [Select]
dnf install php-cli libsodium libsodium-devel php-sodium php-pecl-zip php-pecl-mailparse php-mbstring php-pear php-devel php-pecl-imagick
Code: [Select]
pecl channel-update pecl.php.net
I also upgraded to MariaDB 10.11.13, and I use the rules OWASP CRS v4.16.0...
BR
Venty
2
Installation / Re: I don't receive a single message from root..??
« on: July 08, 2025, 02:12:36 PM »
Hi,
Ok, lastly, for this topic, the following remains as a summary:
1.In main.cf under #network settings, replace:
"mydestination = $myhostname = name.hostname.com'
with "mydestination = srv1.domain.net"
?
2. To the main.cf file, add:
UNDER (# rules restrictions):
smtp_helo_name = $myhostname
?
BR
Venty
Ok, lastly, for this topic, the following remains as a summary:
1.In main.cf under #network settings, replace:
"mydestination = $myhostname = name.hostname.com'
with "mydestination = srv1.domain.net"

2. To the main.cf file, add:
UNDER (# rules restrictions):
smtp_helo_name = $myhostname

BR
Venty
3
Backup / Re: Can't locate diagnostics.pm in @INC (you may need to install th....
« on: July 08, 2025, 01:55:31 PM »Is your server defaulted to perl 5.26 or 5.32?Code: [Select]dnf module list perl
...............
Hi,
When I run the command, it gives me the following error:
https://prnt.sc/RxSm1X3zWcQC
but at the same time:
https://prnt.sc/yO7_MIfjtjiw
What should I do?
BR
Venty
4
PHP / Re: FYI - ionCube Release new loaders 13.3.0
« on: July 08, 2025, 06:52:48 AM »
Hi,
Many thanks to Starburst for this post...
His last post on the subject:
https://starburst.help/control-web-panel-cwp/control-web-panel-cwp-admin-tutorials/ioncube-error-after-building-php-8-3-with-cwp-on-almalinux-8-9/
but should I do it on the condition that I will not be using PHP 8.3 for now?
BR
Venty
Many thanks to Starburst for this post...
His last post on the subject:
https://starburst.help/control-web-panel-cwp/control-web-panel-cwp-admin-tutorials/ioncube-error-after-building-php-8-3-with-cwp-on-almalinux-8-9/
but should I do it on the condition that I will not be using PHP 8.3 for now?
BR
Venty
5
Installation / Re: I don't receive a single message from root..??
« on: July 08, 2025, 06:25:24 AM »
Hi,
Thank you very much, I understood everything, just one last thing to clarify
When going through CWP, I go to the Postfix Mail Server Manager, and check the box where it is shown in the picture:
https://prnt.sc/TXLDNMUAot9p
In this case, when building the mail server, what exactly add or change in the entries in the main.cf file ?
Many thanks in advance!
BR
Venty
Hi,
My question is whether when rebuilding the mail server, will everything we added or changed in the main.cf file be saved or deleted?
Thank you very much!
BR
Venty
6
Backup / Can't locate diagnostics.pm in @INC (you may need to install th....
« on: July 08, 2025, 06:20:23 AM »
Hi,
I returned installation of a CWP (with AL 9.6) and have a standard configuration for backup, but today I checked and found the following in the archive message:
etc/cron.daily/csget:
Can't locate diagnostics.pm in @INC (you may need to install the diagnostics module) (@INC contains: /usr/local/lib64/perl5/5.32 /usr/local/share/perl5/5.32 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /etc/cron.daily/csget line 9.
BEGIN failed--compilation aborted at /etc/cron.daily/csget line 9.
How to check and/or fix?
Thank you very much!
BR
Venty
I returned installation of a CWP (with AL 9.6) and have a standard configuration for backup, but today I checked and found the following in the archive message:
etc/cron.daily/csget:
Can't locate diagnostics.pm in @INC (you may need to install the diagnostics module) (@INC contains: /usr/local/lib64/perl5/5.32 /usr/local/share/perl5/5.32 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /etc/cron.daily/csget line 9.
BEGIN failed--compilation aborted at /etc/cron.daily/csget line 9.
How to check and/or fix?
Thank you very much!
BR
Venty
7
Installation / Re: I don't receive a single message from root..??
« on: July 04, 2025, 10:29:45 AM »Hi,
Thank you very much, I understood everything, just one last thing to clarify

When going through CWP, I go to the Postfix Mail Server Manager, and check the box where it is shown in the picture:
https://prnt.sc/TXLDNMUAot9p
In this case, when building the mail server, what exactly add or change in the entries in the main.cf file ?
Many thanks in advance!
BR
Venty
8
Installation / Re: I don't receive a single message from root..??
« on: July 03, 2025, 04:11:17 PM »
Hi,
Is it necessary to add a record to the file main.cf and what is it for:
smtp_helo_name = $myhostname
Thanks in advance!
BR
Venty
Is it necessary to add a record to the file main.cf and what is it for:
smtp_helo_name = $myhostname
Thanks in advance!
BR
Venty
9
Mod_Security / Re: OWASP CRS v4.15.0/ v4.16.0 Just Release
« on: July 03, 2025, 04:04:39 PM »Hi,
.............
Your configuration paths aren't showing how they where set.QuoteInclude /usr/local/apache/modsecurity-rules/custom-rules/startup/*.conf
Include /usr/local/apache/modsecurity-rules/owasp-crs/coreruleset-4.15.0/crs-setup.conf
Include /usr/local/apache/modsecurity-rules/custom-rules/before/*.conf
Include /usr/local/apache/modsecurity-rules/owasp-crs/coreruleset-4.15.0/rules/*.conf
Include /usr/local/apache/modsecurity-rules/custom-rules/after/*.conf
/modsecurity-rules/custom-rules/before/global_disabled_rules.conf
has rules needed by CWP.
........................
Тhank you very much, I understood everything, just one last thing to clarify:
1. The permanent deactivation or bypass of rules happens again in the file global_disabled_rules.conf, which is in /usr/local/apache/modsecurity-rules/custom-rules/before/?
Thanks in advance!
BR
Venty
10
Installation / Re: I don't receive a single message from root..??
« on: June 29, 2025, 12:48:38 PM »Hi,
for me :
mydestination = $myhostname = name.hostname.com
where name.hostname.com is replaced with my ...
and no record smtp_helo_name = $myhostname
and as far as I can tell and test, DKIM works with localhost...
BR
Venty
and in fail main.cf no record: "smtp_helo_name"
11
Mod_Security / Re: OWASP CRS v4.15.0 Just Release
« on: June 29, 2025, 12:44:08 PM »Did you follow the initial link at the top of the article and update ModSecurity to 2.9.8?
https://starburst.help/control-web-panel-cwp/modsecurity-running-with-control-web-panel/update-modsecurity-2-9-8-running-cwp-and-apache-on-almalinux-8-9/
From your screen shot, it looks like you stopped somewhere before Step 8.
In your owasp.conf, you want it to have those only those 3 lines listed:
Include /usr/local/apache/modsecurity-rules/owasp-crs/coreruleset-4.12.0/crs-setup.conf
Include /usr/local/apache/modsecurity-rules/owasp-crs/coreruleset-4.12.0/rules/*.conf
Include /usr/local/apache/modsecurity-rules/custom-rules/global_disabled_rules.conf
I can login and do this real quick if you want.
Hi,
To perform the update to 2.9.8, but after installation of mod security and updating to 2.9.8, everything is OK, I have the entry "ModSecurity for Apache/2.9.8 (http://www.modsecurity.org/) configured.", but I also have the entry "ModSecurity: Status engine is currently disabled, enable it by set SecStatusEngine to On."... To perform the update to 2.9.8, but after installation of mod security and updating to 2.9.8, everything is OK, I have the entry "ModSecurity for Apache/2.9.8 (http://www.modsecurity.org/) configured.", but I also have the entry "ModSecurity: Status engine is currently disabled, enable it by set SecStatusEngine to On."... What should I do..?
And then perform all the steps, not only up to step 8, please see:
https://prnt.sc/KeSRfdW2nphb
https://prnt.sc/eXDRn9GCDBlx
https://prnt.sc/FN0twkI-TC-A
https://prnt.sc/dyXLr7rwtqK7
https://prnt.sc/-9TIbLitg9ie
I'm sure you'll do it quickly, but let me struggle, someone figure it out, please ...
BR
Venty
12
Installation / Re: I don't receive a single message from root..??
« on: June 27, 2025, 10:19:53 AM »Hi,
for me :
mydestination = $myhostname = name.hostname.com
where name.hostname.com is replaced with my ...
and no record smtp_helo_name = $myhostname
and as far as I can tell and test, DKIM works with localhost...
BR
Venty
and in fail main.cf no record: "smtp_helo_name"
13
Installation / Re: I don't receive a single message from root..??
« on: June 27, 2025, 07:18:29 AM »
Hi,
for me :
mydestination = $myhostname = name.hostname.com
where name.hostname.com is replaced with my ...
and no record smtp_helo_name = $myhostname
and as far as I can tell and test, DKIM works with localhost...
BR
Venty
for me :
mydestination = $myhostname = name.hostname.com
where name.hostname.com is replaced with my ...
and no record smtp_helo_name = $myhostname
and as far as I can tell and test, DKIM works with localhost...
BR
Venty
14
Mod_Security / Re: OWASP CRS v4.15.0 Just Release
« on: June 27, 2025, 07:00:27 AM »Did you follow the initial link at the top of the article and update ModSecurity to 2.9.8?
https://starburst.help/control-web-panel-cwp/modsecurity-running-with-control-web-panel/update-modsecurity-2-9-8-running-cwp-and-apache-on-almalinux-8-9/
From your screen shot, it looks like you stopped somewhere before Step 8.
In your owasp.conf, you want it to have those only those 3 lines listed:
Include /usr/local/apache/modsecurity-rules/owasp-crs/coreruleset-4.12.0/crs-setup.conf
Include /usr/local/apache/modsecurity-rules/owasp-crs/coreruleset-4.12.0/rules/*.conf
Include /usr/local/apache/modsecurity-rules/custom-rules/global_disabled_rules.conf
I can login and do this real quick if you want.
Hi,
To perform the update to 2.9.8, but after installation of mod security and updating to 2.9.8, everything is OK, I have the entry "ModSecurity for Apache/2.9.8 (http://www.modsecurity.org/) configured.", but I also have the entry "ModSecurity: Status engine is currently disabled, enable it by set SecStatusEngine to On."... To perform the update to 2.9.8, but after installation of mod security and updating to 2.9.8, everything is OK, I have the entry "ModSecurity for Apache/2.9.8 (http://www.modsecurity.org/) configured.", but I also have the entry "ModSecurity: Status engine is currently disabled, enable it by set SecStatusEngine to On."... What should I do..?
And then perform all the steps, not only up to step 8, please see:
https://prnt.sc/KeSRfdW2nphb
https://prnt.sc/eXDRn9GCDBlx
https://prnt.sc/FN0twkI-TC-A
https://prnt.sc/dyXLr7rwtqK7
https://prnt.sc/-9TIbLitg9ie
I'm sure you'll do it quickly, but let me struggle, someone figure it out, please ...
BR
Venty
15
Mod_Security / Re: OWASP CRS v4.15.0 Just Release
« on: June 26, 2025, 03:46:15 PM »
Hi,
Ok, I've done everything for version OWASP CRS v4.15.0, as in these instructions for version OWASP CRS v4.12.0...
https://starburst.help/control-web-panel-cwp/modsecurity-running-with-control-web-panel/owasp-crs-ruleset-update-to-4-12-0-running-cwp-and-apache-on-almalinux-8-9
Please take a look:
https://prnt.sc/wNgzhHlIyj25
https://prnt.sc/6XE5ZHQpmNXU
How can I be sure that the security mod works with version OWASP CRS v4.15.0 of the rules?
Thanks in advance!
BR
Venty
Ok, I've done everything for version OWASP CRS v4.15.0, as in these instructions for version OWASP CRS v4.12.0...
https://starburst.help/control-web-panel-cwp/modsecurity-running-with-control-web-panel/owasp-crs-ruleset-update-to-4-12-0-running-cwp-and-apache-on-almalinux-8-9
Please take a look:
https://prnt.sc/wNgzhHlIyj25
https://prnt.sc/6XE5ZHQpmNXU
How can I be sure that the security mod works with version OWASP CRS v4.15.0 of the rules?
Thanks in advance!
BR
Venty