Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
Updates / [SECURITY ALERT] Unauthorized port / [SECURITY ALERT] Unknown/Untrusted file..
« on: February 21, 2026, 11:08:35 AM »
Hi,
Please help, today, after I entered the CWP panel, I have two new messages:
[SECURITY ALERT] Unknown/Untrusted file: /usr/lib64/gconv/gconv-modules.cache
and
[SECURITY ALERT] Unauthorized port, for more info run: sh /scripts/cwp_security_audit
The installation is AL 9.7, and there were a lot of updates yesterday.
Please help...
Thanks in advance, and have a nice day!
BR
Venty
Please help, today, after I entered the CWP panel, I have two new messages:
[SECURITY ALERT] Unknown/Untrusted file: /usr/lib64/gconv/gconv-modules.cache
and
[SECURITY ALERT] Unauthorized port, for more info run: sh /scripts/cwp_security_audit
The installation is AL 9.7, and there were a lot of updates yesterday.
Please help...
Thanks in advance, and have a nice day!
BR
Venty
2
PHP / any problems with PHP 8.3 and later?
« on: December 05, 2025, 07:30:41 AM »
Hi,
with CWP, version 0.9.8.1219 and AlmaLinux release 9.7 (Moss Jungle Cat), what is the recommended version of PHP to use and are there any problems with PHP 8.3 and later?
Thanks in advance!
BR
Venty
with CWP, version 0.9.8.1219 and AlmaLinux release 9.7 (Moss Jungle Cat), what is the recommended version of PHP to use and are there any problems with PHP 8.3 and later?
Thanks in advance!
BR
Venty
3
Updates / AL 9.6, I have info about 240 updates
« on: November 19, 2025, 07:11:28 AM »
Hi,
I work with AL 9.6... Since yesterday, I have info about 240 updates:
https://prnt.sc/vRmNk7sYu7wR
... but nothing happens..., after I select update, nothing happens, and this information about 240 updates available appears again ...
BR
Venty
I work with AL 9.6... Since yesterday, I have info about 240 updates:
https://prnt.sc/vRmNk7sYu7wR
... but nothing happens..., after I select update, nothing happens, and this information about 240 updates available appears again ...
BR
Venty
4
Information / I can't access my post history in this forum...
« on: November 07, 2025, 11:54:22 AM »
Hi,
I can't access my post history in this forum, please help...
BR
Venty
I can't access my post history in this forum, please help...
BR
Venty
5
Updates / ..no dir...
« on: October 18, 2025, 04:13:43 PM »
Hi,
during the last update via the CVP the following part is received:
https://prnt.sc/s-YC2zPIZkIF
which is part of the whole message.. .Other updates go through without problems...
BR
Venty
during the last update via the CVP the following part is received:
https://prnt.sc/s-YC2zPIZkIF
which is part of the whole message.. .Other updates go through without problems...
BR
Venty
6
CSF Firewall / csf: v14.24, do I need to update it?
« on: September 02, 2025, 08:14:08 AM »
Hi,
I am currently using csf: v14.24, do I need to update it?
These days I received the following message in my email:
Subject: Cron <root@hosting> /usr/sbin/csf -u
Message: Oops: Unable to download: Can't connect to download2.configserver.com:443 (Connection refused)
What should I do?
Thanks in advance!
BR
Venty
I am currently using csf: v14.24, do I need to update it?
These days I received the following message in my email:
Subject: Cron <root@hosting> /usr/sbin/csf -u
Message: Oops: Unable to download: Can't connect to download2.configserver.com:443 (Connection refused)
What should I do?
Thanks in advance!
BR
Venty
7
DKIM / DKIM is marked yellow "INVALID"...
« on: August 12, 2025, 06:41:46 AM »
Please help, I have a CWP server (AL 9.6) installed, with one user who manages several domains...
I have followed all the instructions given here for setting up DKIM, all domains have a DKIM record, but when I go to the Email - DKIM Manager menu in the list where the domains are selected in the DKIM records column, all are marked green, only the domain that is associated with the user is marked yellow "INVALID"...
This domain is with the Internet provider where the server is located, in the DNS he has set a DKIM record, which I have also set in the domain settings, the two match - checked, all mail services have been restarted, but again the mark for this domain is yellow "INVALID"...
I also tested with a mail checker, for all other domains DKIM works and is recognized, for this domain it is again unrecognized...
Please advise, what should I check or do?
BR
Venty
I have followed all the instructions given here for setting up DKIM, all domains have a DKIM record, but when I go to the Email - DKIM Manager menu in the list where the domains are selected in the DKIM records column, all are marked green, only the domain that is associated with the user is marked yellow "INVALID"...
This domain is with the Internet provider where the server is located, in the DNS he has set a DKIM record, which I have also set in the domain settings, the two match - checked, all mail services have been restarted, but again the mark for this domain is yellow "INVALID"...
I also tested with a mail checker, for all other domains DKIM works and is recognized, for this domain it is again unrecognized...
Please advise, what should I check or do?
BR
Venty
8
Mod_Security / WordPress or WooCommerce, have a conflict with the OWASP CRS v4.16.0
« on: July 14, 2025, 09:51:02 AM »
Hi,
Does WordPress or WooCommerce, the latest versions, have a conflict with the OWASP CRS v4.16.0 rules?
Do I need to set additional rules in the global_disabled_rules.conf file?
thanks in advance!
BR
Venty
Does WordPress or WooCommerce, the latest versions, have a conflict with the OWASP CRS v4.16.0 rules?
Do I need to set additional rules in the global_disabled_rules.conf file?
thanks in advance!
BR
Venty
9
PHP / Difference in the php views...
« on: July 10, 2025, 08:40:54 AM »
Hi,
please help, why in the CWP panel, when I go to the menu PHP Settings/PHP imfo, php info is displayed like this:
https://prnt.sc/FcozFB37iNmK
and not like this:
https://prnt.sc/GdtmAeHoBNDd
The versions of PHP are different, but this should not be the reason for the difference in the views...
Thanks in advance!
BR
Venty
please help, why in the CWP panel, when I go to the menu PHP Settings/PHP imfo, php info is displayed like this:
https://prnt.sc/FcozFB37iNmK
and not like this:
https://prnt.sc/GdtmAeHoBNDd
The versions of PHP are different, but this should not be the reason for the difference in the views...
Thanks in advance!
BR
Venty
10
Backup / Can't locate diagnostics.pm in @INC (you may need to install th....
« on: July 08, 2025, 06:20:23 AM »
Hi,
I returned installation of a CWP (with AL 9.6) and have a standard configuration for backup, but today I checked and found the following in the archive message:
etc/cron.daily/csget:
Can't locate diagnostics.pm in @INC (you may need to install the diagnostics module) (@INC contains: /usr/local/lib64/perl5/5.32 /usr/local/share/perl5/5.32 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /etc/cron.daily/csget line 9.
BEGIN failed--compilation aborted at /etc/cron.daily/csget line 9.
How to check and/or fix?
Thank you very much!
BR
Venty
I returned installation of a CWP (with AL 9.6) and have a standard configuration for backup, but today I checked and found the following in the archive message:
etc/cron.daily/csget:
Can't locate diagnostics.pm in @INC (you may need to install the diagnostics module) (@INC contains: /usr/local/lib64/perl5/5.32 /usr/local/share/perl5/5.32 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /etc/cron.daily/csget line 9.
BEGIN failed--compilation aborted at /etc/cron.daily/csget line 9.
How to check and/or fix?
Thank you very much!
BR
Venty
11
Installation / I don't receive a single message from root..??
« on: June 23, 2025, 06:09:43 PM »
Hi,
in the settings I have "root forwarder file detected, all root emails are forwarded to: test@mydomain.com", but I don't receive a single message from root..??
Distro Name: AlmaLinux release 9.6 (Sage Margay). PHP version 7.4.33
BR
Venty
in the settings I have "root forwarder file detected, all root emails are forwarded to: test@mydomain.com", but I don't receive a single message from root..??
Distro Name: AlmaLinux release 9.6 (Sage Margay). PHP version 7.4.33
BR
Venty
12
DKIM / Problem with DKIM..
« on: June 23, 2025, 10:45:06 AM »
Hi,
had to reinstall the server and through the user account I added three new domains, I set up the DKIM records, but please look at what is visible in DKIM & SPF Manager...(with the previous installation everything was OK):
https://prnt.sc/7r0uwwyiMOQh
... and this is not a permanent situation, sometimes it shows a green check mark on one domain, sometimes on another...
I also tested the DKIM records are not active...
Before I started, I executed:
https://starburst.help/control-web-panel-cwp/control-web-panel-cwp-admin-tutorials/dkim-not-working-on-almalinux-9-with-cwp/
Distro Name: AlmaLinux release 9.6 (Sage Margay). PHP version 7.4.33
What should I do..?
Thanks in advance!
BR
Venty
had to reinstall the server and through the user account I added three new domains, I set up the DKIM records, but please look at what is visible in DKIM & SPF Manager...(with the previous installation everything was OK):
https://prnt.sc/7r0uwwyiMOQh
... and this is not a permanent situation, sometimes it shows a green check mark on one domain, sometimes on another...
I also tested the DKIM records are not active...
Before I started, I executed:
https://starburst.help/control-web-panel-cwp/control-web-panel-cwp-admin-tutorials/dkim-not-working-on-almalinux-9-with-cwp/
Distro Name: AlmaLinux release 9.6 (Sage Margay). PHP version 7.4.33
What should I do..?
Thanks in advance!
BR
Venty
13
Mod_Security / OWASP CRS v4.15.0 Just Release
« on: June 16, 2025, 06:17:43 PM »
Hi,
The OWASP CRS ruleset 4.15.0 was just released .... how to install them???
Thanks in advance!
BR
Venty
The OWASP CRS ruleset 4.15.0 was just released .... how to install them???
Thanks in advance!
BR
Venty
14
MySQL / upgraded MariaDB, and to 10.11and does not recognize the database....
« on: June 02, 2025, 06:18:25 PM »
Hi,
I used the instructions here:
https://kb.starburstservices.com/control-web-panel-cwp/control-web-panel-cwp-admin-tutorials/upgrade-mariadb-10-x-to-10-11-with-cwp-on-almalinux-9/
and upgraded MariaDB to 10.11....
Today, I had to create a new database with a user through the user panel. Everything went normally, but when I tried to use the database during WordPress installation, I encountered an error stating that it could not access the database.
I tested it several times, but it didn't work.. Then again, through the user panel, I "changed" the password of the database user (I copied and pasted the same one that I had set when creating the database), and everything worked - the WordPress installation accessed the database???
I haven't made any changes to the server, except that on 25.05 MariaDB was updated to 10.11.13 and I changed the root password.
When checking the status of the MySQL Database Server, I found the following entries:
Jun 02 20:59:19 hosting.mydomain.com mariadbd[1123]: 2025-06-02 20:59:19 682 [Warning] Aborted connection 682 to db: 'postfix' user: 'postfix' host: 'localhost' (Got an error reading communication packets)
Jun 02 21:03:04 hosting.mydomain.com mariadbd[1123]: 2025-06-02 21:03:04 1234 [Warning] Aborted connection 1234 to db: 'postfix' user: 'postfix' host: 'localhost' (Got an error reading communication packets)
Jun 02 21:04:08 hosting.mydomain.com mariadbd[1123]: 2025-06-02 21:04:08 1693 [Warning] Access denied for user 'hosmyd_k92test'@'localhost' (using password: YES)
Please help, what should I do?
BR
Venty
I used the instructions here:
https://kb.starburstservices.com/control-web-panel-cwp/control-web-panel-cwp-admin-tutorials/upgrade-mariadb-10-x-to-10-11-with-cwp-on-almalinux-9/
and upgraded MariaDB to 10.11....
Today, I had to create a new database with a user through the user panel. Everything went normally, but when I tried to use the database during WordPress installation, I encountered an error stating that it could not access the database.
I tested it several times, but it didn't work.. Then again, through the user panel, I "changed" the password of the database user (I copied and pasted the same one that I had set when creating the database), and everything worked - the WordPress installation accessed the database???
I haven't made any changes to the server, except that on 25.05 MariaDB was updated to 10.11.13 and I changed the root password.
When checking the status of the MySQL Database Server, I found the following entries:
Jun 02 20:59:19 hosting.mydomain.com mariadbd[1123]: 2025-06-02 20:59:19 682 [Warning] Aborted connection 682 to db: 'postfix' user: 'postfix' host: 'localhost' (Got an error reading communication packets)
Jun 02 21:03:04 hosting.mydomain.com mariadbd[1123]: 2025-06-02 21:03:04 1234 [Warning] Aborted connection 1234 to db: 'postfix' user: 'postfix' host: 'localhost' (Got an error reading communication packets)
Jun 02 21:04:08 hosting.mydomain.com mariadbd[1123]: 2025-06-02 21:04:08 1693 [Warning] Access denied for user 'hosmyd_k92test'@'localhost' (using password: YES)
Please help, what should I do?
BR
Venty
15
E-Mail / WordPress nail
« on: April 12, 2025, 02:35:32 PM »
Hi,
since few days i stopped receiving messages from wordpress about new site...
BR
Ventyp
since few days i stopped receiving messages from wordpress about new site...
BR
Ventyp
